דרושים Technician Lab Msl ב-Western Digital ב-Thailand, Khlong Chik Subdistrict

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• R&D build execution to deliver the product on time
• Support engineering and supervisor experiments
• Maintain machine performance
• Follow procedures to perform assigned tasks.
• Solving machine problem
• Feedback problems or abnormal as observed

REQUIRED:

• Diploma degree in Electrical, Mechanical, Production, or related field.
• 2-4 experience in a technician electrical industrial
• Good in English communication

SKILLS:

• Knowledge machine mechanic
• Bonder assembly experience.
• Knowledge basic electrical circuit
• Knowledge systematic work skills
• Able to work in high pressure
• Leader shift skill
• Good Attitude
• Healthy able to work shift
• Advanced skills in Microsoft Word, Excel, Access and Power point.

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Set up, calibrate, and operate the alignment machine in accordance with standard operating procedures (SOPs).
• Monitor bond quality and machine performance through visual inspection, dimensional measurements, and shear tests.
• Perform both corrective and preventive maintenance.
• Accurately record process parameters and yield data.
• Assist with continuous improvement efforts related to bonding processes and tooling.
• Strictly follow ESD, safety, and cleanliness protocols.
• Operate AVI systems to inspect completed components for surface defects, alignment issues, and missing elements.
• Load/unload parts from AVI machines and manage inspection results in the system.
• Review flagged defects and escalate any critical quality issues to QA or engineering.
• Perform routine checks and calibration on AVI systems to ensure optimal performance.
• Analyze defect trends and assist engineering teams in root cause analysis and corrective actions.

REQUIRED:

• Diploma in Electrical, Mechanical, Mechatronics, or a related field.
• 2–4 years of experience in semiconductor/electronics manufacturing, particularly with bonding and inspection tools.
• Familiarity with Alignment bonder machines and AVI platforms.
• Basic mechanical and troubleshooting skills.
• Ability to interpret process documents, drawings, and inspection criteria.

SKILLS:

• Able to work on shift.
• Able to work under high pressure
• Leadership and shift management skills
• Good attitude and positive mindset
• Physically healthy and able to work in shifts
• Advanced skills in Microsoft Word, Excel, Access, and PowerPoint

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Implementation, development and operation of Hard disk drive and HAMR technology tribology component head and media testing.
• Work on various tribometers and testers, focusing on the new development of Blade HDD-like testing in environmental chambers, to characterize mechanical, electrical and magnetic performance, reliability and lifetime of head designs and media pairings.
• Direct operators to receive, inspect and index parts and materials entering the lab.
• Assist the supervisor to direct a team of Engineering Operator personnel that perform 24-7 operational tribology testing and assist with their training needs.
• Assist the Supervisor and other technicians, to ensure all Tribology equipment and testers are available, operated without deviation from official procedures, are well maintained and meet contamination, ESD and safety/hazard requirements.
• Manipulate raw data automatically or manually into spreadsheets and data analysis software, then construct MS PowerPoint presentations based on standard templates for Engineer review.
• Own specific tester statistical process control and preventative maintenance activities per IMS/ISO standards.
• Assist the team of Operators for lab tidiness (6S) and cleanliness.
• Assist in development of testers to enable the required testing and desired data output.
• Assist with Helium gas cylinder changes.
• Perform statistical data analysis on software such as JMP.
• Train other operators & technicians for tester operation, data analysis and report.
• Manage testing schedule with Operators and Engineers.
• Lead to perform 1st & 2nd level FA and debug of any testing issues and report to Engineer or Management level.
• Other adhoc duties as assigned, including wider Development departmental tasks and team building events.
• Attend and participate in training as assigned.

REQUIRED:

• Diploma degree in Electrical, Mechanical, Production, or related field.
• 2-4 experience in a technician electrical industrial
• Good in English communication

SKILLS:

• Knowledge machine mechanic
• Bonder assembly experience.
• Knowledge basic electrical circuit
• Knowledge systematic work skills
• Able to work in high pressure
• Leader shift skill
• Good Attitude
• Healthy able to work shift
• Advanced skills in Microsoft Word, Excel, Access and Power point.

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Follow procedures and process flows as set by the engineer.
• Provide support to engineers during new setups and buy-off activities for processes, equipment, tooling, fixtures, and materials in the Development/NPI phase.
• Perform daily monitoring of new processes, equipment, tooling, fixtures, and material usage during the Development/NPI phase.
• Summarize daily build activities and report any technical issues to the engineer.
• Conduct preliminary data analysis.
• Perform initial troubleshooting and problem-solving for new processes, equipment, tooling, fixtures, and materials during the Development/NPI phase.
• Attend and successfully complete required training as per company policies.
• Attend and pass certification for training related to assigned equipment and processes.
• Attend and pass certification for special training required for working in specific areas or with special equipment (e.g., confined space, XRF equipment) in accordance with Thai legal requirements.

REQUIRED:

• Diploma or higher degree in Electronics, Electrical, Mechanical, Industrial Engineering, or an equivalent field.
• 0–2 years of experience in manufacturing or related fields.
• Able to work in a cleanroom area
• Able to work in shifts (4 off 2)

PREFERRED:

• Experience in hard disk drive manufacturing is an added advantage.
• In-depth knowledge of slider fabrication processes.
• Understanding of ESD (Electrostatic Discharge) and contamination impacts related to hard disk drive manufacturing.
• Knowledge of SPC systems, applications, and rules.
• Flexible and adaptable

SKILLS:

• Proficient in Microsoft Office tools such as Excel, Word, and PowerPoint.
• Ability to extract, summarize, interpret, and present data effectively.
• Good communication skills, both verbal and written.

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Follow procedures and process flows as set by the engineer.
• Provide support to engineers during new setups and buy-off activities for processes, equipment, tooling, fixtures, and materials in the Development/NPI phase.
• Perform daily monitoring of new processes, equipment, tooling, fixtures, and material usage during the Development/NPI phase.
• Summarize daily build activities and report any technical issues to the engineer.
• Conduct preliminary data analysis.
• Perform initial troubleshooting and problem-solving for new processes, equipment, tooling, fixtures, and materials during the Development/NPI phase.
• Attend and successfully complete required training as per company policies.
• Attend and pass certification for training related to assigned equipment and processes.
• Attend and pass certification for special training required for working in specific areas or with special equipment (e.g., confined space, XRF equipment) in accordance with Thai legal requirements.

REQUIRED:

• Diploma or higher degree in Electronics, Electrical, Mechanical, Industrial Engineering, or an equivalent field.
• 0–2 years of experience in manufacturing or related fields.
• Able to work in a cleanroom area
• Able to work in shifts (4 off 2)

PREFERRED:

• Experience in hard disk drive manufacturing is an added advantage.
• In-depth knowledge of slider fabrication processes.
• Understanding of ESD (Electrostatic Discharge) and contamination impacts related to hard disk drive manufacturing.
• Knowledge of SPC systems, applications, and rules.
• Flexible and adaptable

SKILLS:

• Proficient in Microsoft Office tools such as Excel, Word, and PowerPoint.
• Ability to extract, summarize, interpret, and present data effectively.
• Good communication skills, both verbal and written.

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Implementation, development and operation of Hard disk drive and HAMR technology tribology component head and media testing.
• Work on various tribometers and testers, focusing on the new development of Blade HDD-like testing in environmental chambers, to characterise mechanical, electrical and magnetic performance, reliability and lifetime of head designs and media pairings.
• Direct operators to receive, inspect and index parts and materials entering the lab.
• Assist the supervisor to direct a team of Engineering Operator personnel that perform 24-7 operational tribology testing and assist with their training needs.
• Assist the Supervisor and other technicians, to ensure all Tribology equipment and testers are available, operated without deviation from official procedures, are well maintained and meet contamination, ESD and safety/hazard requirements.
• Manipulate raw data automatically or manually into spreadsheets and data analysis software, then construct MS PowerPoint presentations based on standard templates for Engineer review.
• Own specific tester statistical process control and preventative maintenance activities per IMS/ISO standards.
• Assist the team of Operators for lab tidiness (6S) and cleanliness.
• Assist in development of testers to enable the required testing and desired data output.
• Assist with Helium gas cylinder changes.
• Perform statistical data analysis on software such as JMP.
• Train other operators & technicians for tester operation, data analysis and report.
• Manage testing schedule with Operators and Engineers.
• Lead to perform 1st & 2nd level FA and debug of any testing issues and report to Engineer or Management level.
• Other adhoc duties as assigned, including wider Development departmental tasks and team building events.
• Attend and participate in training as assigned.

REQUIRED:

• Minimum Diploma in a technical field such as Electronics or Engineering.
• A minimum of 0-2 years of experience in R&D / Industry or Academic Research / Testing / Characterization or related field.
• Operator or Technician experience.

PREFERRED:

• Preferred Bachelors in a technical field such as Electronics or Engineering.
• Experienced with hard-disk drive technology is preferred.
• Experience with Test Engineering, Guzik, Blade, other HGA/slider tester.
• Previous experience as a R&D / Research / Testing / Characterization engineer or academic researcher
• Python, Matlab, JMP, Visual Basic, MS Excel, VBA macro. C++

SKILLS:

• Fair in Microsoft Office tools such as Powerpoint, Excel, and Word
• Fair in Reading, Writing, and listening of English
• Able to develop relationships of trust and confidence with team and work as good teamwork.

Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Implementation, development and operation of Hard disk drive and HAMR technology tribology component head and media testing.
• Work on various tribometers and testers, focusing on the new development of Blade HDD-like testing in environmental chambers, to characterise mechanical, electrical and magnetic performance, reliability and lifetime of head designs and media pairings.
• Direct operators to receive, inspect and index parts and materials entering the lab.
• Assist the supervisor to direct a team of Engineering Operator personnel that perform 24-7 operational tribology testing and assist with their training needs.
• Assist the Supervisor and other technicians, to ensure all Tribology equipment and testers are available, operated without deviation from official procedures, are well maintained and meet contamination, ESD and safety/hazard requirements.
• Manipulate raw data automatically or manually into spreadsheets and data analysis software, then construct MS PowerPoint presentations based on standard templates for Engineer review.
• Own specific tester statistical process control and preventative maintenance activities per IMS/ISO standards.
• Assist the team of Operators for lab tidiness (6S) and cleanliness.
• Assist in development of testers to enable the required testing and desired data output.
• Assist with Helium gas cylinder changes.
• Perform statistical data analysis on software such as JMP.
• Train other operators & technicians for tester operation, data analysis and report.
• Manage testing schedule with Operators and Engineers.
• Lead to perform 1st & 2nd level FA and debug of any testing issues and report to Engineer or Management level.
• Other adhoc duties as assigned, including wider Development departmental tasks and team building events.
• Attend and participate in training as assigned.

REQUIRED:

• Minimum Diploma in a technical field such as Electronics or Engineering.
• A minimum of 0-2 years of experience in R&D / Industry or Academic Research / Testing / Characterization or related field.
• Operator or Technician experience.

PREFERRED:

• Preferred Bachelors in a technical field such as Electronics or Engineering.
• Experienced with hard-disk drive technology is preferred.
• Experience with Test Engineering, Guzik, Blade, other HGA/slider tester.
• Previous experience as a R&D / Research / Testing / Characterization engineer or academic researcher
• Python, Matlab, JMP, Visual Basic, MS Excel, VBA macro. C++

SKILLS:

• Fair in Microsoft Office tools such as Powerpoint, Excel, and Word
• Fair in Reading, Writing, and listening of English
• Able to develop relationships of trust and confidence with team and work as good teamwork.