Biomedical Technician Apprentice Salt Lake City Ut jobs at Ge Healthcare in United States, Salt Lake City

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information

• Execute training plans

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation

• Provide strong individual contributions to team goals

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership

• Maintain daily production output

• Identify and report defects in assigned area

• Engage in daily 5s activities

• High School diploma/GED or Local Equivalent and 2 years technical experience

• Ability to work independently

• Demonstrated basic computer skills and ability to navigate online instructions

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Associates degree in an Electronics or Engineering field

• Electrical experience

• Experience in medical manufacturing or other highly regulated industry preferred.

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

• Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.

• Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.

• Perform electrical calibration on production/refurb systems and subassemblies.

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.

• Execute training plans.

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.

• Interpret circuit board schematics/system interconnect diagrams.

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.

• Provide strong individual contributions to team goals.

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership.

• Maintain daily production output.

• Identify and report defects in assigned area.

• Engage in daily 5s activities.

• Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.

• Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Must be able to physically lift (floor to waist, waist to crown level, and horizontally)

• Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)

• Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday

• Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday

• Must be able to frequently stoop, bend, squat and kneel throughout the workday

• Must be able to stand/sit continuously throughout the day

• Must be able to ascend/descend/balance occasionally on portable step stools

• Bachelor’s degree in manufacturing, Engineering or Technology related fields.

• Experience in medical manufacturing or other highly regulated industry preferred.

• Performs manufacturing and maintenance work from detailed work instructions and operational method sheets.

• Maintains daily production output with accurate records of the work performed and other records as may be required by management.

• Make limited decisions within the confines of quality and safety approved procedures, with guidance.

• Mainly performing production work and may be dependent upon others for non-standard work. Flexibility and adaptability expected.

• Complies with all EHS, Training and Quality procedures and policies

• Perform routine troubleshooting of process or equipment. Brings equipment irregularities to the attention of the supervisor.

• Use Lean tools to improve established processes and metrics in daily work. Participates in Action Workouts and Kaizen events.

• Make acquired skills or knowledge available to others; train others on manufacturing processes.

• Willing to cross-training in other areas of manufacturing process to assist in site goals.

• All other duties as assigned.

• Associates degree in Applied Sciences (or local equivalent 2 year degree)ORa High School diploma (or local equivalent)and2 years technical experience in relevant industry.

• Proficiency to understand and interpret basic written technical information.

• Demonstrated ability to work well with general direction and information.

• Demonstrated proficiency to utilize computerized work

• Effective verbal and written communication skills with teammates, management, and across functions.

• Being able to sit and/or stand for long periods of time.

• Ability to work in a clean room environment including wearing the required PPE for long periods of time.

• Knowledge of semiconductor manufacturing process and/or thin film deposition.

• Experience with vacuum systems, compressed gases, RF power, PLC & computer systems strongly preferred

• Demonstrated experience working in quality-controlled environment, specifically FDA-regulated medical product manufacturing or another relevant environment.

• Demonstrated strong problem-solving / equipment troubleshooting skills.

• Mechanical, facilities and/or maintenance experience.

• Experience working in a cleanroom environment.

• Lean / Six Sigma experience.

• Responsible for the daily preventative maintenance, troubleshooting, repair, and optimization of manufacturing equipment. Processing equipment includes Wet etching, Dry etching, and Photolithography, PVD, PECVD, and Chemical plating processes.

• Perform support for tracking/trending of the systems for control and increased system uptime.

• Troubleshooting electronics on process equipment.

• Perform trouble shooting, program reloading, and minor PLC or HMI programing for various type controllers and interfaces.

• Perform repair and maintenance on system robotics.

• Process knowledge of high vacuum processing equipment, to be able to troubleshoot, repairs, and optimize uptime.

• Maintain complete and accurate records of all work and provide data for formal reports (oral and written) as required.

• Develop SOPs, work instructions, and execute training plans as required.

• Use judgment to determine proper troubleshooting steps or improvement to processes.

• Collaborate with other departments in the planning & execution of duties to ensure the orderly flow of material and information.

• Adjust variables as directed, take specified data, and bring equipment irregularities to the attention of the supervisor. Make a variety of specified measurements and manipulations with skill.

• From detailed instructions, set up or modify equipment, calibrate and operate equipment.

• May participate in quality control inspections.

• Work with Facilities Manager, engineers, supervisors, and other managers to improve quality and process efficiency.

• Understand and execute LO/TO principles.

• Comply with all EHS and Quality procedures and policies.

• Associate Degree in Applied Science field plus 3 years or more of related experience; or any Associate Degree plus 4 years or more of related experience; or a Bachelor of Science degree in Applied Sciences field; OR High School Diploma/GED plus 5 years or more of related experience OR equivalent overall related experience and/or education in lieu of specific degrees.

• Demonstrated project management & project execution skills.

• Demonstrated ability to easily shift from one activity to another.

• Demonstrated motivation to meet manufacturing outputs and continuously improve processes.

• Demonstrated ability to work well with limited direction and information.

• Proficiency to understand and interpret basic written technical information.

• Demonstrated proficiency to utilize computerized work systems.

• Effective verbal and written communication skills. Ability to communicate using English.

• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening

• Bachelor’s degree in Engineering or closely related field Familiarity and experience with Environmental Health and Safety regulations and procedures.

• Demonstrated knowledge of electronics, PLCs, HMIs, and Robotics. Demonstrate knowledge of flat panel manufacturing or semi-conductor processing equipment.

• Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.

• Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.

• Perform electrical calibration on production/refurb systems and subassemblies.

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.

• Execute training plans.

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.

• Interpret circuit board schematics/system interconnect diagrams.

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.

• Provide strong individual contributions to team goals.

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership.

• Maintain daily production output.

• Identify and report defects in assigned area.

• Engage in daily 5s activities.

• Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.

• Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Must be able to physically lift (floor to waist, waist to crown level, and horizontally)

• Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)

• Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday

• Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday

• Must be able to frequently stoop, bend, squat and kneel throughout the workday

• Must be able to stand/sit continuously throughout the day

• Must be able to ascend/descend/balance occasionally on portable step stools

• Bachelor’s degree in manufacturing, Engineering or Technology related fields.

• Experience in medical manufacturing or other highly regulated industry preferred.

RESPONSIBILITIES

• Under supervision, evaluate basic customer biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety, environmental inspections and maintain effective customer relations. Follow appropriate GEHC policies, procedures, hospital protocol and complete necessary documentation, as guided.

• Maintain daily communications with customers as directed, to ensure resolution and proper follow-up, leading to customer satisfaction. As instructed, implement GEHC/customer facility contract, supporting business goals and objectives.

• May assist more experienced technicians on progressive repairs and resolution. Work as a member of local team to provide efficient service delivery to all accounts within assigned area.

• Document all repair actions and submit reports/summaries according to schedule. Maintain approved parts inventory. Manage vendor's service delivery processes in compliance with GEHC policies, as instructed.

• Ensure proper care of spares, tools and test equipment and ensure calibration. Enhance and maintain technical knowledge of current standards, codes, and procedures regarding safe and effective use of medical equipment formal instruction.

• Meet Health and Human Services, as well as Environment Health and Safety requirements.

• Complete all planned Quality and Compliance training within the defined deadlines. Identify and report any and all customer quality or compliance concerns immediately to the Quality Organization.

• Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position.

REQUIRED QUALIFICATIONS

• AS, BS, MS degree, military education, certificate program, current student with less than 12 months from completion (with a cumulative GPA of a 2.0 or higher based on a 4.0 scale) OR High School Diploma/GED with 6 months experience servicing electronic, IT or mechanical equipment.

• Previous experience and/or course work in which you have successfully interpreted schematic diagrams and performed troubleshooting and planned maintenance on basic diagnostic imaging or electronic equipment following current standards, code, and procedures to ensure safe and effective operation of those devices.

• Must have reliable transportation and a valid driver's license.

• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job.

DESIRED QUALIFICATIONS

• Previous experience interpreting schematic diagrams and perform effective repair and planned maintenance on basic biomedical or electronic equipment.

• Ability to develop and maintain good customer relations.

• Analytical and communication skills with the ability to communicate technical issues to the customer in an easy-to-understand manner.

• Experience interfacing with both internal team members and external customers as part of a solution based service process.

• Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment in the electronic field - resulting in knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical devices.

• Change agent and process oriented.

• Special Physical Requirements: Candidate must be able to lift, carry, push, and pull up to 35 lbs. unassisted and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit and stand for long periods of time. Candidate must also be able to reach at, above and below shoulder level, flex/extend neck and have good hand and finger dexterity. Specific vision abilities required by this job may include color, close vision, distance vision, peripheral vision, and depth perception.

• You may not relocate more than 30 miles from your current location without approval from your manager.

• Local candidates strongly preferred.

• The successful applicant must comply with GEHC’s standard background check, including a post-offer drug test. In addition, during employment, the employee must comply with all customer access policies, including but not limited to obtaining and/or providing proof of required immunizations, and additional drug tests or background checks (including a federal government background check if assigned to support a contract with the federal government).

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Essential Responsibilities

• Perform basic chemical testing on facility related equipment, e.g. boilers, water softeners, DI-Water system, etc.
• Learn and perform basic system tasks, e.g. boiler rotations, logs and blowdowns, fire system testing.
• Follow daily good housekeeping practices to maintain all mechanical areas in a clean and safe environment.
• Testing and maintenance of the facility eyewash and safety showers
• Be a clear thinker and be able to work independently as well as within a group setting.
• Must possess the skill to complete routine and non-routine preventive maintenance tasks as assigned by the Maintenance Supervisor or Facilities Leaders.
• Must be computer literate, Windows etc. but experience with building management systems a plus.
• Perform walking and written tours on facility related equipment.
• Ability to learn and operate facilities systems, e.g. Industrial Wastewater, DI-Water, Fluoride Recovery.
• Responsible for maintaining bathroom plumbing system, commode, urinal and sink maintenance.
• Assist Facility Technicians with maintenance tasks as needed.
• Maintain facility water softeners, be able independently to lift 50lbs.
• Standing and walking for extended periods of time.
• Able to climb ladders and work from heights.
• Shovel snow as needed.
• Work in confined spaces such as cooling towers and air handling units.
• All other duties as assigned.
• Must be able to work 12 hr. rotating shifts, including nights, weekends, holidays as well as overtime as needed.

Required Qualifications

• High School Diploma or GED.
• Basic mechanical aptitude.
• Basic knowledge of hand tool usage.
• Demonstrated proficiency to utilize computerized work.
• Reliable transportation.
• Ability to communicate in local language, verbal and written (English).
• Demonstrated ability to work well with general direction and information.
• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.