Ict Debug Technician-1 jobs at Flex in United States, Austin
Flex Process Engineering Technician United States, Texas, Austin
Share
Reporting to thethewill be responsible for keeping the production line running.
Principle Accountabilities:
- Performs set‑up of processing equipment.
- Monitors, audits and provides guidance to line operators.
- Processes test runs and prepares records (breakdown events, scrap, etc.), charts, and graphs of results for presentation to engineering to identify yield problems or test new products.
- Provides technical assistance to process development and engineering personnel.
- Line change configuration.
- Performs corrective maintenance.
- Follows escalation procedures.
The experience we’re looking to add to our team
- Associate degree, vocational or technical training, or equivalent experience.
- 1+ years of related experience in Manufacturing.
- Demonstrates functional and/or process knowledge and participates in process.
- Ability to add, subtract, multiply and divide all units of measure.
- Leadership experience
- Automated equipment work (Preferred)
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex ICT Engineer United States, Texas, Austin
Share
located inAustin, TX
Reporting to the
What a typical day looks like:
- MUST HAVE EXPERIENCE WITH Keysight 3070 In-Circuit Test applications.
- Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
- Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, telemeter and record test data.
- Determines conditions under which tests are to be conducted and sequences and phases of test operations.
- Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
- Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
- Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
- Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem-solving techniques.
- Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements
The experience we’re looking to add to our team:
- 5+ years of related experience
- ICT Keysight 3070 (or similar) support experience
- Must have experience with Boundary scan (IEEE 1149)
- Bachelor’s degree in Electrical Engineer , Computer Science, or related field
- Python, Perlscripting experience(preferred)
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Process Engineering Technician United States, Texas, Austin
Share
Reporting to thethewill be responsible for keeping the production line running.
Principle Accountabilities:
- Performs set‑up of processing equipment.
- Monitors, audits and provides guidance to line operators.
- Processes test runs and prepares records (breakdown events, scrap, etc.), charts, and graphs of results for presentation to engineering to identify yield problems or test new products.
- Provides technical assistance to process development and engineering personnel.
- Line change configuration.
- Performs corrective maintenance.
- Follows escalation procedures.
The experience we’re looking to add to our team
- Associate degree, vocational or technical training, or equivalent experience.
- 1+ years of related experience in Manufacturing.
- Demonstrates functional and/or process knowledge and participates in process.
- Ability to add, subtract, multiply and divide all units of measure.
- Leadership experience
- Automated equipment work (Preferred)
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Automation Technician United States, Texas, Austin
Share
**Work Shift: 6:00pm-6:00am Wednesday, Thursday, Friday every other Saturday**
- Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components
- Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability
- Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis.
- Understanding of PLCs
- Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings.
- Collaborate with the automation team in the qualification process of automated systems.
- Assists engineers in developing and designing hardware and software required for all automation solutions per specifications.
- Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism.
- Repairs the failure mechanism in the most cost-effective manner.
- Performs preventive maintenance at specified intervals and schedules.
- Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
- Assists process technicians and engineers with the installation and removal of process equipment.
- Analyzes and implements corrective action reports and process tracking mechanisms.
- Disassembles instruments and equipment and inspects components for defects.
- Aligns, repairs, replaces, and balances component parts and circuitry.
- Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment.
- Highest level may perform both software and hardware maintenance.
The experience we’re looking to add to our team:
- Computer skills
- Experience with material handling, automation and/or robotics equipment
- Electronic Assembly: schematics, PCB loading, mechanical assembly
- Cables: crimping, harness assembly, connector/wire soldering, cable prepping
- Testing: oscilloscope, cable & harness testing, troubleshooting, component testing, logic analyzer
- Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering
- Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Automation Technician-5 United States, Texas, Austin
Share
What a typical day looks like:
Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components
Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability
Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis.
Understanding of PLCs
Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings.
Collaborate with the automation team in the qualification process of automated systems.
Assists engineers in developing and designing hardware and software required for all automation solutions per specifications.
Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism.
Repairs the failure mechanism in the most cost-effective manner.
Performs preventive maintenance at specified intervals and schedules.
Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
Assists process technicians and engineers with the installation and removal of process equipment.
Analyzes and implements corrective action reports and process tracking mechanisms.
Disassembles instruments and equipment and inspects components for defects.
Aligns, repairs, replaces, and balances component parts and circuitry.
Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment.
Highest level may perform both software and hardware maintenance.
The experience we’re looking to add to our team:
Computer skills
Experience with material handling, automation and/or robotics equipment
Electronic Assembly: schematics, PCB loading, mechanical assembly
Cables: crimping, harness assembly, connector/wire soldering, cable prepping
Testing: oscilloscope, cable & harness testing, troubleshooting, component testing, logic analyzer
Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering
Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools
Full range of medical benefits, dental, vision
Life Insurance
Matching 401K
PTO
Tuition Reimbursement
Employee discounts at local retailers
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Automation Technician United States, Texas, Austin
Share
What a typical day looks like:
Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components
Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability
Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis.
Understanding of PLCs
Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings.
Collaborate with the automation team in the qualification process of automated systems.
Assists engineers in developing and designing hardware and software required for all automation solutions per specifications.
Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism.
Repairs the failure mechanism in the most cost-effective manner.
Performs preventive maintenance at specified intervals and schedules.
Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
Assists process technicians and engineers with the installation and removal of process equipment.
Analyzes and implements corrective action reports and process tracking mechanisms.
Disassembles instruments and equipment and inspects components for defects.
Aligns, repairs, replaces, and balances component parts and circuitry.
Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment.
Highest level may perform both software and hardware maintenance.
The experience we’re looking to add to our team:
Computer skills
Experience with material handling, automation and/or robotics equipment
Electronic Assembly: schematics, PCB loading, mechanical assembly
Cables: crimping, harness assembly, connector/wire soldering, cable prepping
Testing: oscilloscope, cable & harness testing, troubleshooting, component testing, logic analyzer
Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering
Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools
Full range of medical benefits, dental, vision
Life Insurance
Matching 401K
PTO
Tuition Reimbursement
Employee discounts at local retailers
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Automation Technician United States, Texas, Austin
Share
What a typical day looks like:
- Maintain continuous system operation by adjusting, repairing, replacing, or modifying automation/robotic system components
- Troubleshoot electrical, mechanical, pneumatic and hydraulic systems and components and return to serviceability
- Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis.
- Understanding of PLCs
- Read and interpret electrical schematics, mechanical diagrams including complex automated system drawings.
- Collaborate with the automation team in the qualification process of automated systems.
- Assists engineers in developing and designing hardware and software required for all automation solutions per specifications.
- Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism.
- Repairs the failure mechanism in the most cost-effective manner.
- Performs preventive maintenance at specified intervals and schedules.
- Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
- Assists process technicians and engineers with the installation and removal of process equipment.
- Analyzes and implements corrective action reports and process tracking mechanisms.
- Disassembles instruments and equipment and inspects components for defects.
- Aligns, repairs, replaces, and balances component parts and circuitry.
- Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment.
- Highest level may perform both software and hardware maintenance.
The experience we’re looking to add to our team:
- Computer skills
- Experience with material handling, automation and/or robotics equipment
- Electronic Assembly: schematics, PCB loading, mechanical assembly
- Cables: crimping, harness assembly, connector/wire soldering, cable prepping
- Testing: oscilloscope, cable & harness testing, troubleshooting, component testing, logic analyzer
- Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering
- Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Share
Reporting to thethewill be responsible for keeping the production line running.
Principle Accountabilities:
- Performs set‑up of processing equipment.
- Monitors, audits and provides guidance to line operators.
- Processes test runs and prepares records (breakdown events, scrap, etc.), charts, and graphs of results for presentation to engineering to identify yield problems or test new products.
- Provides technical assistance to process development and engineering personnel.
- Line change configuration.
- Performs corrective maintenance.
- Follows escalation procedures.
The experience we’re looking to add to our team
- Associate degree, vocational or technical training, or equivalent experience.
- 1+ years of related experience in Manufacturing.
- Demonstrates functional and/or process knowledge and participates in process.
- Ability to add, subtract, multiply and divide all units of measure.
- Leadership experience
- Automated equipment work (Preferred)
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
