United States, Ohio, Hardware Technician jobs
Intel Senior Hardware Engineer United States, Texas
Share
) is at the forefront of silicon photonics integration and is part ofData Center, connected computing-devicesnearly aand higher speeds from 400G today to 1.6T+ and beyond tomorrow. We are looking forgreat talentto accelerate thisso if you are interested in joining our leadingthen we want to hear from you.
The team is seeking an experienced Hardware Designer with expertise in SI and PI to support the development of reference module designs, PIC sub-system EVB and other test boards to support product development. Demonstrated expertise in designing 100G/lane and 200G/lane module PCBA, lead the layout execution for high-speed traces, power delivery, require extensive experience with designing PDN for high-speed DSP, RFICs, manage PI and SI requirements, actively guide layout engineer and manage tradeoffs in design. The candidate will be expected collaborate with a cross functional product development team - HW, FW, PIC, EIC, Packaging and thermal, Optics and NPI.
Job responsibilities include but are not limited to:
- Perform SI simulations of high-speed interfaces, RF traces, etc. 100Gbps, 200Gbps NRZ and PAM4 signaling.
- Modeling of high speed traces with vias, connectors, sockets and various system components in 3D EM tools like HFSS, ADS.
- Design and optimize Power Delivery Network (PDN) across packages and PCBs.
- Perform PI sims for IR drop, current density violations, dynamic switching noise analysis to validate board designs.
- Expertise in designing 100G/lane and 200G/lane module PCBA, lead the layout execution for high-speed traces, power delivery, require extensive experience with designing PDN for high-speed DSP, RFICs, manage PI and SI requirements, actively guide layout engineer and manage tradeoffs in design.
- Ability to lead hardware design of an optical transceiver and evaluation boards including schematic design, circuit simulation, PCB layout floor planning, design with layout engineer is a plus.
- Lead PCB bring up working with FW engineers to confirm functionality w.r.t design targets. Validate PCB high speed designs thru product design verification tests and independent PCBA characterization. Troubleshoot and optimize performance of thesub-system/transceivermodule boards.
- Extensive experience with selection of DSP, Driver, TIA, uControllers, DACs, ADCs, Voltage regulators, etc.
- Key contributor to Product Requirements, Owns PCBA design from concept phase to full final design and EVT/DVT phase of the product.
- Understand electrical and optical requirements and specifications of optical transceiver MSA. Like 800G DR8/2xFR4, 1.6T DR8/2xFR4, 800G LPO, 1.6T LRO etc.
- Maintain documentation of a hardware design specification, Pass design check list prior to tape out, BOM specifications and work with NPI team to build PCBA. Lead design reviews and present design summary to management, highlight risks with mitigation plans.
- Interface and work collaboratively with mechanical engineers, optical engineers, Photonics engineer, firmware engineers, process engineers and test engineers.
- Interact with program manager, buyer/planner and suppliers to make sure designed parts are available in a timely manner for build and test.
You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
Minimum Qualifications
- M.S. in Electrical Engineering
- 4+ years of HW/circuit design experience
- 4+ years of experience in:
- transceiver electrical design principles, including high speed signal integrity, crosstalk, power integrity, noise, ESD, FW, testing, etc.
- layout and able to direct layout engineer with clear design priority
- PI and SI tools (HFSS, ADS, Cadence)
- high density multiple-layer board design.
- high volume PCB/substrate fab houses.
Preferred Qualifications
- Ph.D. in Electrical Engineering
- Strong analog and digital circuit design skills and layout with mixed signal designs.
- Experience working with AWG, DCAM, VNA/LCA to characterize high speed performance
- Strong laboratory optical and electrical measurement skills.
- Strong communication and presentation skills.
- Experience with micro-controllers and communication protocols such as SPI, I2C, MDIO, CMIS management interface for optical modules.
- Strong background of digital communication theory.
- Familiarity with industry standards including IEEE Ethernet standards, OIF standards, PCIe standards and various MSAs.
- Experience with optical transceiver test and calibration methodologies.
- Experience working with Marvell, Broadcom, MaxLinear, Credo DSPs in pluggable optical modules.
Position of Trust
Weoffer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here:
Annual Salary Range for jobs which could be performed in the US: 161,230.00 USD - 303,140.00 USD The range displayed on this job posting reflects the minimum and maximum target compensation for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific compensation range for your preferred location during the hiring process.This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.These jobs might be a good fit
Applied Materials Engineering Technician - T2 1st shift United States, Texas, Austin
Share
Key Responsibilities
Performs routine to moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.
May test and troubleshoot system level and component level problems in electrical and mechanical systems and sub-systems. May perform new system and NPI installations and field upgrades.
Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform routine testing and troubleshooting.
Compiles logbooks and test procedures documentation utilizing good writing skills.
May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.
Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems.
May perform rework as a result of testing. Generates Quality Notifications.
Functional Knowledge
- Has developed analytical skills and application of scientific methods to perform a variety of activities
Business Expertise
- Has good understanding of how the team integrates with others
Leadership
- Has no supervisory responsibilities
Problem Solving
- Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods
Impact
- Impacts the quality of own work
Interpersonal Skills
- Uses communication skills to exchange of information
These jobs might be a good fit
Applied Materials Process Technician III T3 United States, California
Share
What We Offer
$29.00 - $39.60Santa Clara,CAKey Responsibilities
*Shift assignment will be four days per week, 6AM to 6PM or 6PM to 6AM
- Prepares wafers for experimentation to include cleaning. Loads wafers, prepares reactor for experimentation and cleans reactors. Operates reactor to perform etch process. Recommends performance of process system and troubleshooting.
- Prepare cross section samples for scanning electron microscope (SEM) and TEM, including cutting, mounting coupons, cleaning, coating and submission.
- Records process conditions and experimental observations. Evaluates wafers and coupons, including modification of the process recipes.
- Prepares graphs and tables summarizing results.
- Coordinates with process engineers on wafer evaluations. Sets up equipment for experiments.
Uses quantitative wafer evaluation and process instrumentation knowledge to draw conclusions from data. Assists in training lower level technicians.
- Develop and publish best known method (BKM) procedures including, sample prep, and special sample handling.
Knowledgeably operates laboratory process equipment and instrumentation.
Functional Knowledge
Has developed advanced specialized expertise within aanalytical/scientificarea to perform the most complex work
Problem Solving
Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent
Interpersonal Skills
Exchanges ideas and information effectively; uses tact and diplomacy when dealing with others
Full timeAssignee / RegularThese jobs might be a good fit
Applied Materials Engineering Technician III United States, California
Share
Key Responsibilities
Performs moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.
Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. May perform new system and NPI installations and field upgrades.
Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform moderate testing and troubleshooting.
Compiles logbooks and test procedures documentation utilizing good writing skills. Assists in revising, developing and implementing department procedures.
May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.
Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems.
Performs necessary rework and assists in determining remedies for malfunctions and generates Quality Notifications.
Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.
Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.
Functional Knowledge
- Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks
Business Expertise
- Has a good understanding of how the team integrates with others to achieve objectives
Leadership
- May provide informal guidance and support to more junior team members
Problem Solving
- Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures
Impact
- Impacts the quality of own work and its contribution to the team
Interpersonal Skills
- Uses communication skills to regularly exchange information
These jobs might be a good fit
Applied Materials Manufacturing Technician II United States, California
Share
Shift:Weekend Shift: Friday – Sunday, 7am – 7:30pm (12 hours x 3 days)
Role Responsibilities:
Use work orders (including schematics, wiring diagrams, parts lists, and instructions) to build, repair and/or test equipment of various kinds (electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components)
Work under moderate supervision to perform electro-mechanical assembly operations, troubleshooting and repairs
Receive parts and perform audits to ensure all necessary parts are available; inspect parts for defects; troubleshoot and improve processes
Use test fixtures, electronic measurement equipment, leak detectors and/or vacuum pumps to test assemblies, subassemblies and components
Complete required job documentation (data entry) about progress, work expense and labor details; perform computer programming, repair or software installs, if needed
Minimum Qualifications:
A high school diploma
1–2 years of semiconductor or display experience, or comparable industry or military experience
Ability to follow standard operation procedures (written and verbal)
Knowledge of basic hand tools
Preferred Qualifications:
An Associate’s degree or technical education, certifications or trainings
A willingness to expand your skills within ananalytical/scientificmethod or operational process
Solid analytical skills, and an ability to problem-solve using established operating procedures or scientific methods
ASSEET
BSEET (DeVry, TSTC)
This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts. Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.
Full timeAssignee / RegularThese jobs might be a good fit
Applied Materials Metrology Technician United States, Texas, Austin
Share
Key Responsibilities
Performs inspection of purchased parts, materials, components, and/or equipment. Confirm accuracy and develop inspection methods of manufactured parts.
Assists in determining methods, sequences, and procedures used for inspection. And will perform all levels of inspections.
Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret intermediate technical drawings and specification requirements.
Document results by recording and writing detailed test results and quality problem reports.
Utilize Advanced Problem Solving abilities to identify complex root causes and solutions.
Understanding and apply Statistical Methods/Applications & use of complex precision measuring inspection tooling, gauges, and equipment (CMM- use of and basic programming capability)
Develops audit methods, sequences, and procedures used for inspection. In addition, perform complex audits.
Functional Knowledge
- Has developed advanced specialized expertise within aanalytical/scientificarea to perform the most complex work
Business Expertise
- Has a good understanding of how related teams coordinate their efforts and resources to achieve objectives
Leadership
- May act as a lead for the team, may allocate work and provide subject matter guidance to more junior team members
Problem Solving
- Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent
Impact
- Impacts the effectiveness of own team and closely related teams
Interpersonal Skills
- Exchanges ideas and information effectively; uses tact and diplomacy when dealing with others
This is a 2nd Shift Position.
- Calypso Experience Preferred
- Optical Inspection Preferred
- SAP familiarity a plus
These jobs might be a good fit
Applied Materials Engineering Technician III - T3 United States, California
Share
Key Responsibilities
Performs moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.
Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. May perform new system and NPI installations and field upgrades.
Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform moderate testing and troubleshooting.
Compiles logbooks and test procedures documentation utilizing good writing skills. Assists in revising, developing and implementing department procedures.
May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.
Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems.
Performs necessary rework and assists in determining remedies for malfunctions and generates Quality Notifications.
Functional Knowledge
- Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks
Business Expertise
- Has a good understanding of how the team integrates with others to achieve objectives
Leadership
- May provide informal guidance and support to more junior team members
Problem Solving
- Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures
Impact
- Impacts the quality of own work and its contribution to the team
Interpersonal Skills
- Uses communication skills to regularly exchange information
These jobs might be a good fit
) is at the forefront of silicon photonics integration and is part ofData Center, connected computing-devicesnearly aand higher speeds from 400G today to 1.6T+ and beyond tomorrow. We are looking forgreat talentto accelerate thisso if you are interested in joining our leadingthen we want to hear from you.
The team is seeking an experienced Hardware Designer with expertise in SI and PI to support the development of reference module designs, PIC sub-system EVB and other test boards to support product development. Demonstrated expertise in designing 100G/lane and 200G/lane module PCBA, lead the layout execution for high-speed traces, power delivery, require extensive experience with designing PDN for high-speed DSP, RFICs, manage PI and SI requirements, actively guide layout engineer and manage tradeoffs in design. The candidate will be expected collaborate with a cross functional product development team - HW, FW, PIC, EIC, Packaging and thermal, Optics and NPI.
Job responsibilities include but are not limited to:
- Perform SI simulations of high-speed interfaces, RF traces, etc. 100Gbps, 200Gbps NRZ and PAM4 signaling.
- Modeling of high speed traces with vias, connectors, sockets and various system components in 3D EM tools like HFSS, ADS.
- Design and optimize Power Delivery Network (PDN) across packages and PCBs.
- Perform PI sims for IR drop, current density violations, dynamic switching noise analysis to validate board designs.
- Expertise in designing 100G/lane and 200G/lane module PCBA, lead the layout execution for high-speed traces, power delivery, require extensive experience with designing PDN for high-speed DSP, RFICs, manage PI and SI requirements, actively guide layout engineer and manage tradeoffs in design.
- Ability to lead hardware design of an optical transceiver and evaluation boards including schematic design, circuit simulation, PCB layout floor planning, design with layout engineer is a plus.
- Lead PCB bring up working with FW engineers to confirm functionality w.r.t design targets. Validate PCB high speed designs thru product design verification tests and independent PCBA characterization. Troubleshoot and optimize performance of thesub-system/transceivermodule boards.
- Extensive experience with selection of DSP, Driver, TIA, uControllers, DACs, ADCs, Voltage regulators, etc.
- Key contributor to Product Requirements, Owns PCBA design from concept phase to full final design and EVT/DVT phase of the product.
- Understand electrical and optical requirements and specifications of optical transceiver MSA. Like 800G DR8/2xFR4, 1.6T DR8/2xFR4, 800G LPO, 1.6T LRO etc.
- Maintain documentation of a hardware design specification, Pass design check list prior to tape out, BOM specifications and work with NPI team to build PCBA. Lead design reviews and present design summary to management, highlight risks with mitigation plans.
- Interface and work collaboratively with mechanical engineers, optical engineers, Photonics engineer, firmware engineers, process engineers and test engineers.
- Interact with program manager, buyer/planner and suppliers to make sure designed parts are available in a timely manner for build and test.
You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
Minimum Qualifications
- M.S. in Electrical Engineering
- 4+ years of HW/circuit design experience
- 4+ years of experience in:
- transceiver electrical design principles, including high speed signal integrity, crosstalk, power integrity, noise, ESD, FW, testing, etc.
- layout and able to direct layout engineer with clear design priority
- PI and SI tools (HFSS, ADS, Cadence)
- high density multiple-layer board design.
- high volume PCB/substrate fab houses.
Preferred Qualifications
- Ph.D. in Electrical Engineering
- Strong analog and digital circuit design skills and layout with mixed signal designs.
- Experience working with AWG, DCAM, VNA/LCA to characterize high speed performance
- Strong laboratory optical and electrical measurement skills.
- Strong communication and presentation skills.
- Experience with micro-controllers and communication protocols such as SPI, I2C, MDIO, CMIS management interface for optical modules.
- Strong background of digital communication theory.
- Familiarity with industry standards including IEEE Ethernet standards, OIF standards, PCIe standards and various MSAs.
- Experience with optical transceiver test and calibration methodologies.
- Experience working with Marvell, Broadcom, MaxLinear, Credo DSPs in pluggable optical modules.
Position of Trust
Weoffer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here:
Annual Salary Range for jobs which could be performed in the US: 161,230.00 USD - 303,140.00 USD The range displayed on this job posting reflects the minimum and maximum target compensation for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific compensation range for your preferred location during the hiring process.This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.These jobs might be a good fit
