Process Technician jobs in United States, Utah, Salt Lake City

• Experience with assembly of mechanical or electrical systems, or performing component-level repairs and troubleshooting on technical equipment.
• Experience diagnosing and troubleshooting one of the following: operating systems, computer/server hardware, or networking protocols.
• Ability to lift/move 50lb (23kg) of equipment and ability to exert yourself physically over extended periods of time, including frequent bending, kneeling, climbing, pushing/pulling and lifting.
  
• Ability to work non-standard hours, including working weekends, night shifts, holidays and on shift-based schedules as required.

• Bachelor's degree or equivalent practical experience.
• Completion of the online Google IT Support Professional Certificate program.
  
• 2 years of experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.
  
• Experience with performing component-level repairs and troubleshooting on IT equipment or in a similar role (e.g., systems administration, network deployment engineer, help desk technician, etc).
• Experience working within a data center or network operation center environment.
  
• Ability to collaborate and partner with teams to overcome challenges, and to adapt to changes in a dynamic work environment.

Process Engineerlocated inSLC, UT.

Reporting to the Process Engineer Manager ; the potential Process Engineer would be responsible for process-engineering capabilities focused on cost, quality and delivery improvements in order to hold up a manufacturing organization.

What a typical day looks like:

• Recognize the manufacturing process, technologies, techniques and the product.
• Define, implement and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable and reproducible process parameters.
• Trouble shoot process related issues and help to develop, implement and take ownership of process control methodologies.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and through put.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation and review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during new technology transfer.
• Provide equipment maintenance, repair hold up as required and guide costimprovement/reductionprograms.

Education / Experience

Typically requires a Bachelor’s Degree in related field or equivalent experience and training.

Knowledge / Skills / Abilities

Use of the following tools may be required: Electronic Assembly: color code, component, and schematics. May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.

Decision Making / Discretion

Limited decision-making opportunities or responsibilities; makes guided or scenario-based decisions requiring management approval.

Supervision / Leadership

Closely supervised, normally receives detailed instructions on all work.

Work Environment:

While performing the duties of this job, the employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to moving mechanical parts.

Physical Demands:

While performing the duties of this job, the employee is frequently required to talk and hear. The employee is occasionally required to stand, walk, sit, handle small components and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and depth perception.

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

• Experience with assembly of mechanical or electrical systems, or performing component-level repairs and troubleshooting on technical equipment.
• Experience diagnosing and troubleshooting one of the following: operating systems, computer/server hardware, or networking protocols.
• Ability to lift/move 50lb (23kg) of equipment and ability to exert yourself physically over extended periods of time, including frequent bending, kneeling, climbing, pushing/pulling and lifting.
  
• Ability to work non-standard hours, including working weekends, night shifts, holidays and on shift-based schedules as required.

• Bachelor's degree or equivalent practical experience.
• Completion of the online Google IT Support Professional Certificate program.
  
• 2 years of experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.
  
• Experience with performing component-level repairs and troubleshooting on IT equipment or in a similar role (e.g., Systems Administration, Network Deployment Engineer, Help Desk Technician, etc).
• Experience working within a data center or network operation center environment.
  
• Ability to collaborate and partner with teams to overcome issues, and to adapt to changes in a dynamic work environment.

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information

• Execute training plans

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation

• Provide strong individual contributions to team goals

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership

• Maintain daily production output

• Identify and report defects in assigned area

• Engage in daily 5s activities

• High School diploma/GED or Local Equivalent and 2 years technical experience

• Ability to work independently

• Demonstrated basic computer skills and ability to navigate online instructions

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Associates degree in an Electronics or Engineering field

• Electrical experience

• Experience in medical manufacturing or other highly regulated industry preferred.

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

• Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.

• Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.

• Perform electrical calibration on production/refurb systems and subassemblies.

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.

• Execute training plans.

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.

• Interpret circuit board schematics/system interconnect diagrams.

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.

• Provide strong individual contributions to team goals.

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership.

• Maintain daily production output.

• Identify and report defects in assigned area.

• Engage in daily 5s activities.

• Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.

• Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Must be able to physically lift (floor to waist, waist to crown level, and horizontally)

• Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)

• Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday

• Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday

• Must be able to frequently stoop, bend, squat and kneel throughout the workday

• Must be able to stand/sit continuously throughout the day

• Must be able to ascend/descend/balance occasionally on portable step stools

• Bachelor’s degree in manufacturing, Engineering or Technology related fields.

• Experience in medical manufacturing or other highly regulated industry preferred.

• Experience with assembly of mechanical or electrical systems, or performing component-level repairs and troubleshooting on technical equipment.
• Experience diagnosing and troubleshooting one of the following: operating systems, computer/server hardware, or networking protocols.
• Ability to lift/move 50lb (23kg) of equipment and ability to exert yourself physically over extended periods of time, including frequent bending, kneeling, climbing, pushing/pulling and lifting.
  
• Ability to work non-standard hours, including working weekends, night shifts, holidays and on shift-based schedules as required.

• Bachelor's degree or equivalent practical experience.
• Completion of the online Google IT Support Professional Certificate program.
  
• 2 years of experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.
  
• Experience with performing component-level repairs and troubleshooting on IT equipment or in a similar role (e.g., Systems Administration, Network Deployment Engineer, Help Desk Technician, etc).
• Experience working within a data center or network operation center environment.
  
• Ability to collaborate and partner with teams to overcome issues, and to adapt to changes in a dynamic work environment.

Process Engineerlocated inSLC, UT.

Reporting to the Process Engineer Manager ; the potential Process Engineer would be responsible for process-engineering capabilities focused on cost, quality and delivery improvements in order to hold up a manufacturing organization.

What a typical day looks like:

• Recognize the manufacturing process, technologies, techniques and the product.
• Define, implement and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable and reproducible process parameters.
• Trouble shoot process related issues and help to develop, implement and take ownership of process control methodologies.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and through put.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation and review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during new technology transfer.
• Provide equipment maintenance, repair hold up as required and guide costimprovement/reductionprograms.

Education / Experience

Typically requires a Bachelor’s Degree in related field or equivalent experience and training.

Knowledge / Skills / Abilities

Use of the following tools may be required: Electronic Assembly: color code, component, and schematics. May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.

Decision Making / Discretion

Limited decision-making opportunities or responsibilities; makes guided or scenario-based decisions requiring management approval.

Supervision / Leadership

Closely supervised, normally receives detailed instructions on all work.

Work Environment:

While performing the duties of this job, the employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to moving mechanical parts.

Physical Demands:

While performing the duties of this job, the employee is frequently required to talk and hear. The employee is occasionally required to stand, walk, sit, handle small components and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and depth perception.

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement