Project Coordinator jobs in United States, California, San Francisco

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Come solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, performant, low-cost satellite bus and payload. As a Sr. PCBA Manufacturing Engineer, you will work across design engineering, supply-chain, quality, and our manufacturing partners to drive Project Kuiper electrical sub-system and PCBA manufacturing and delivery.Key job responsibilities- Drive the PCBA Manufacturing Qualification process at the CM. Define manufacturing readiness requirements and lead key milestone reviews to ensure all production readiness deliverables are complete.
- Investigate and develop new manufacturing technology and methodologies to enhance PCBA quality, reliability, throughput, and cost.
- Drive closure of all operational issues during pre-production builds. Work within Operations, Supply Chain, R&D, and Reliability Engineering to implement and optimize manufacturing processes and improve yields for production ramp.
- Investigate failures/defects in production, test, and integration. Identify and mitigate underlying root causes to prevent reoccurrence as part of continuous improvement efforts.
- Identify opportunities for risk reduction and simplification of PCBA manufacturing processes.
- Deliver manufacturing processes capabilities including equipment capability, quality controls, materials characterization, and standardized rework practices.
- Actively monitor the success of products and processes through production ramp. Provide regular status reports of PCBAs progress from design to production.
- Deploy and qualify polymerics (staking, underfill, and conformal coat) equipment for high volume production.

- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 3+ years of experience in PCBA/PCB production/processes and manufacturing engineering.
- Experience in board assembly processes and equipment: Stencil, paste print, SPI, pick & place, SMT reflow, AOI, 5DX, selective solder, flying probe, and wash.
- Experience leading DFX reviews for manufacturability, testability, quality, and reliability.
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.
- Strong writing skills.

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 5+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 3+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC-A-610H Class 3, IPC J-STD-001H compliance
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Come solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, performant, low-cost satellite bus and payload. As a Sr. PCBA Manufacturing Engineer, you will work across design engineering, supply-chain, quality, and our manufacturing partners to drive Project Kuiper electrical sub-system and PCBA manufacturing and delivery.Key job responsibilities- Drive the PCBA Manufacturing Qualification process at the CM. Define manufacturing readiness requirements and lead key milestone reviews to ensure all production readiness deliverables are complete.
- Investigate and develop new manufacturing technology and methodologies to enhance PCBA quality, reliability, throughput, and cost.
- Drive closure of all operational issues during pre-production builds. Work within Operations, Supply Chain, R&D, and Reliability Engineering to implement and optimize manufacturing processes and improve yields for production ramp.
- Investigate failures/defects in production, test, and integration. Identify and mitigate underlying root causes to prevent reoccurrence as part of continuous improvement efforts.
- Identify opportunities for risk reduction and simplification of PCBA manufacturing processes.
- Deliver manufacturing processes capabilities including equipment capability, quality controls, materials characterization, and standardized rework practices.
- Actively monitor the success of products and processes through production ramp. Provide regular status reports of PCBAs progress from design to production.
- Deploy and qualify polymerics (staking, underfill, and conformal coat) equipment for high volume production.

- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 3+ years of experience in PCBA/PCB production/processes and manufacturing engineering.
- Experience in board assembly processes and equipment: Stencil, paste print, SPI, pick & place, SMT reflow, AOI, 5DX, selective solder, flying probe, and wash.
- Experience leading DFX reviews for manufacturability, testability, quality, and reliability.
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.
- Strong writing skills.

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 5+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 3+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC-A-610H Class 3, IPC J-STD-001H compliance
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).

The Role:
In this role you will:
· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models
· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program
· Write tests in C/C++ to execute on embedded CPU
· Develop tests for FPGA and emulation platforms
· Run formal verification of complex blocks to ensure functional correctness
· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C
· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the database
Export Control Requirement:

- Bachelor's degree in Electrical / Communications Engineering or Computer Science, or related field, or equivalent experience
- 5+ years in verification preferably in communication systems
- 2+ years in UVM, C/C++ and scripting

- Master's or Ph.D degree in Electrical / Communications Engineering
- 7+ years in digital verification, preferably in communication systems
- Familiarity with Matlab
- Familiarity with formal verification techniques
- Strong written and verbal skills

Key job responsibilities
As a Sr. PCBA Manufacturing Test Engineer, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Kuiper’s internal test development teams and our manufacturing partners. You will ensure successful test deployment by documenting procedures, training CM personnel, and providing ongoing support. You will have excellent debugging skill with the ability to dive deep and determine the root-cause of a test failure.Key job responsibilities• Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.
• Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.
• Analyze data to identify failure trends and provide recommendations PCBA, process, and test system improvement.
• Develop procedures and documentation for use by test operators.
• Train operators on test processes and support recurring certification programs.
• Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.
• Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.
• Run small teams to accomplish short-term objectives and implement strategic initiatives.Export Control Requirements: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life

- Bachelor’s Degree in Electrical Engineering Electrical Engineering Technology or related field
- 8+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- 8+ years of experience integrating software and hardware systems.
- 8+ years of experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.) to debug complex PCBAs.
- Ability to write detailed test station operating procedures
- Ability to create deployment/capacity plans for multiple testers at multiple CMs
- Experience with Linux/scripting

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 7+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 5+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC standards for PCB, PCBA, and RFPC fabrication, assembly, and test.
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Ability to lead small teams in root-causing technical product manufacturability and process problems and drive implementation of solutions.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.

You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.
About the team
*Why AWS*
*Diverse Experiences*
Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.*Work/Life Balance*
*Inclusive Team Culture*
*Mentorship and Career Growth*
We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.

- B.S. in Electrical, Mechanical, or other related engineering degrees as well as 10+ years Controls related experience; or Associates degree and 12+ years of Controls related experience; or High School diploma with 15 years of Controls related experience
- 6+ years hiring, promoting, coaching, leading, and developing teams of controls professionals.
- 6+ years with industrial controls in critical environment (data center, pharmaceutical, manufacturing, oil & gas, petrochemical, laboratory, power, water etc.).
- 6+ years of general project or vendor management experience (request for proposals, bidding, change orders, quality control, and RFI and submittal tracking) associated with project execution.

- M.S. in Electrical Engineering, Mechanical Engineering, Engineering Technology, HVAC, or other related engineering degrees as well as ten (10) years related experience; or an equivalent combination of education and experience.
- Project Management Professional (PMP) or equivalent.
- Certified as a Professional Engineer (PE), LEED
- Prior AWS/Amazon experience
- 5+ Yr. Military Service