Systems Engr Ii jobs at Honeywell in United States, Chattanooga

Develop sufficient knowledge to independently conduct specialist reviews for assigned technology Fired Heaters.
Thermal design of Fired Heaters using FRNC software.
Primary single point contact for assigned technology area in Delhi for:
New Fired Heater Specifications
Sales / Service support
Revamp designs
Existing “Fired Heaters” evaluations
Fired Heaters troubleshooting
Maintain and coordinate development of required infrastructure within assigned technology area – in coordination with other local/ global specialist.
Specification of auxiliary Fired Heater equipment like Burner, APH, ID & FD Fans.
Participate in field/shop inspection or troubleshooting activities related to assigned technology area.
Work with corresponding technology specialist to improve design and develop new designs.
Working knowledge of industry standards like API 560, API 530, API 535 etc.
Familiarity with related vendors and their products.
Ability to perform technical evaluations of vendor proposals.
Minimum RequirementsBE Chemical/ Mechanical or equivalent degree.
Around 7+ years of experience in operations or design of Fired Heaters.
Proficient in the use of computers for specification generation, technical evaluations, and the electronic sharing of data across geographically separated work groups.
Excellent communication and interpersonal skills required
Additional Information

• JOB ID: HRD249396
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Lead Global Solutions Specialist - OperationsThis position will be the key leadership position to look after 24x7 operations at Global Solutions Command and Control Center.
Job Description:Lead Global Solutions Center, day to day operations with strong operation MOS.
This role will be key in balancing the resource and priority items based on SIOP meetings.
This position is the key to ensuring seamless operation and accountability of 24x7 decision making.
Ensuring high resource utilization/billability of the center.
Accountable to minimize manual work by Automation/Standardization.Monitoring different UOP technologies process and identifying areas for improvement/optimization and assets requiring enhanced focus.Initial triage of technical issues with the escalation process to TS.
Proactively communicate insights from trends, establish patterns, diagnostic investigations, and solutions to prevent future issues.
Ensure upkeep of all solutions by troubleshooting the PM/PTA/Exception Based Alerts/Benchmarking /Future Solutions on time to ensure high on-screen availability of the running solutions
Expertise in doing Exploratory Data Analysis on Time series data using ProSight.
Hands-on skills in developing insights end-to-end, including EDA, data processing, hyper-parameter tuning, baseline modeling, and model deployment.
Apply data mining to handle unstructured data to derive technical insights.
Perform descriptive and inferential statistics to summarize datasets.
Prior knowledge of Time Series Forecasting in Prosight/Data Science.
Knowledge of UOP Technologies.
Derive problem statement from ambiguous data, create a hypothesis, use analytics and tools to test hypothesis and form conclusions
Excellent technical expertise in all the areas of Descriptive, Predictive, and Prescriptive Analytics, including Optimization Analytics, Simulation & Advanced Machine Learning Algorithms.
Experience in cleaning, process, manipulate, and analyze data.
Ability to build scalable, user-centric applications -Building Models Data Science
Analysis of large amounts of historical data, determining suitability for modeling, data clean-up and filtering, pattern identification and variable creation, applying automated predictive analytics.
The focus is to support product, system, and solution through designing and developing pipelines.
Establishing additional work processes & documentation for the GSC.Part of 24x7 Operation of GSCCC Digital Insight
Working in 24x7 Shift is an integral part of this role. Work with GSCCC Center leader closely to make GSC as “Center of Excellence”Additional Candidate Qualifications:
Excellent verbal, written, interpersonal communication & effective presentation skills
English language (oral and written)
Ability to multi-task
Be flexible to come in shift as a replacement in short notice
Exposure to techniques like forecasting, predictive methods, classification techniques, and segmentation is highly desirable.
Effective project management, presentation, and communication skills
Continuous learning and research-oriented mindset. Ability to think out of the box: Ability to come up with bright ideas and always looking at the next big thing in technology.
Have strong analytical skills; be able to interpret data, identify trends, and make suggestions for improvements
Knowledge of DataScience Open Source is added plus.
Proficiency in computer applications with emphasis on Data Analytics & Data Science is desirableComprehensive analytical, troubleshooting & problems solving skills.Ability to define the problem with limited information
• Bachelor's degree in chemical engineering
• Min of 12 years of experience in technical service or process operation/engineering/monitoring role within the refining and petrochemical industry.
Additional Information

• JOB ID: HRD265500
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Sr. Advanced Mechanical Engineer - Rotating EquipmentDetailed Job Description:
Thorough knowledge of rotating equipment features and mechanical details, andtheir proper specification and application.Examples include determination ofthe proper seals, bearings, lubrication systems, anti-surge controls, andgovernors.
Expertise on application of rotating equipment in specific process plantapplications.Typical issues include materials selection, seal type, and theevaluation of pump and compressor performance curves relative to process systemhydraulics.
Strong familiarity with related vendors and their products.
Ability to perform technical evaluations of vendor proposals.
Experience as the owner’s representative during performance tests in vendorshops or in the field.
Detailed understanding regarding refinery processes and operations.
Strong knowledge of related industry standards (API, ANSI, NEMA, etc.).
Experience in evaluating operating equipment in a process plant environment andworking with operators and other plant personnel.
Experience preparing/ reviewing specifications based on process data.
Ability to evaluate the suitability of existing equipment for new conditions,such as during the revamp of an existing unit.Good understanding of Rotating package equipment.
Assist in the review and development of related computer tools anddocumentation.This requires good writing skills and the ability to work withcomplex Excel-based spreadsheets.
Strong Coaching and Mentoring skills.
Minimum Requirements:
A minimum of 12 years of design oriented rotating equipment experience in theRefining, Petrochemical and Gas Processing industries.
Proficient in the use of computers for specification generation, technicalevaluations, and the electronic sharing of data across geographically separatedwork groups.
Excellent communication and interpersonal skills required.BE Mechanical or equivalent.
Additional Information

• JOB ID: req476597
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Keyresponsibilities include:
Develop performance estimates in support of Catalysts, Adsorbents & Specialties (CA&S) Sales and assist in the preparation of Technical Proposals.
Provide sales support: including technical and commercial perspective, recommendations on guarantees, unit start-up support and turn-around support and analysis of commercial operating experience.
Effectively communicate UOP recommendations, requirements and benefits.
Champion change and improvement in technologies supported via innovation.
Participate in engineering review meetings for new units and revamps including Design Basis, Process Flow Diagrams (PFD), Process & Instrumentation Diagrams (P&ID), Hazard and Operability Study (HAZOP), Model Reviews, and other activities.
Bring operational and safety considerations into design to ensure reliable performance.Provide office-based and on-site troubleshooting assistance to commercial units and conduct on-site commercial unit audits.Develop, prepare, update general operating manuals, process technology manuals, and training material and present UOP technology training courses.
YOU MUST HAVE

• Basic Candidate Qualifications:B.E. / B.Tech. degree in Chemical Engineering is required.
  8+ years of experience in technical service, process operations, or design engineering role within the refining, petrochemical or gas processing industry is required.Additional Candidate Qualifications:Experience in design/operation of Platforming, Penex, Isomer and Butamer unit is essential.
  At least 6 years of UOP FOS, UOP Engineering /Technical Services or equivalent refinery process operations or technical services experience is considered ideal.
  Strong verbal, presentation and written communication skills.
  Ability to analyze and solve complex and challenging problems. Self-driven and always looking to improve on the current best practices or technology offering.
  Strong mechanical aptitude and troubleshooting skills.
  Ability to work well independently and in a team environment.
  Ability to handle multiple tasks concurrently.
  Ability to travel 25% annually to both domestic and international sites.

Additional Information

• JOB ID: req487484
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

The Engineering Skills Team at UOP India (IPL) has successfully engineered and executed/ managed projects for delivery of Sch A Mech engineering design for various technologies and equipment engineering associated viz Polybed PSA Units; high performance Trays (like MD/ ECMD Trays); modular Units (like CCR, Recovery Plus, ISOSIV, Merox etc) for clients both in India and abroad.As UOPIPL grows, it will continue to offer “engineering & delivery” of standard stand-alone products (like PSA, MD Trays etc) and of modular products (like Mod Merox, Mod CCR, Mod Recovery Plus etc) to its customers on a worldwide basis while adding to its portfolio from UOP’s wide range of technologies (like Mod PENEX, Mod NHT, Mod Platforming etc). As a part of IPL’s growth plans, there exists a role for an Engineer – Static equipment. Below is a description of the roles & responsibilities for this position.DIRECTLY ACCOUNTABLE for:
Preparation and understanding of UOP’s Basic Mechanical engineering design package and detail design of propriety internals for the technologies that are supported by UOP ( Sch A design)Experience and well versed in Preparing datasheets /Acting as the Requisitioner / Reviewing bidder offers/ Review and comment/ approval of vendor procedures/ drawings/ docs to ensure complete compliance with customer requirements, design calculations and code requirements.
Following-up on static equipment fabrication, including inspection and testing at suppliers' shops.
Should have prior knowledge of 3D modeling and should be able to take part in 3D model reviewProviding technical support for fixed/ budgetary price proposals, cost estimates, and design basis data
Design and detail engineering of pressure vessels / heat exchangers /Tanks as per international codes such as ASME Section VIII Div.- 1 & 2, PD 5500, TEMA, API 650, API 660, API 661, API 663 and shall have experience with design software Compress, PV Elite, Aspen (B-JAC) and HTRI.Design and fabrication requirements of pressure vessels / heat exchangers and should have good knowledge of fabrication methods and design constraints.
Reviewing of job package and prepare technical clarifications required from customer and prepare contract review summary.
Evaluation of technical specifications applicable for job and ensure that all requirements of specifications and applicable codes are complied during engineering.
Static analysis, including deadweight, multiple pressures, thermal displacements, wind loads, uniform loads, seismic conditions etc.
Following UOP procedures using official tools and templates along with instructions on special customer requirements.
On the basis of UOP-standards and practices, in compliance with Client-requirements, the engineer will prepare/ issue/ revise applicable Technical UOP-specifications for her/ his discipline. These will entail different types of heat exchangers and static equipment like vessels, tanks etc that are compliant with the Client’s requirements and UOP-standards and practices.
Providing technical follow-up and inspection reports to Manager/ Project Manager for their follow-up, to ensure technically compliant and timely delivery of equipment from shops contracted by UOP.
Liaising internally with other discipline engineers and departments including Procurement (BUYER). .
Providing deliverables within budgeted cost and schedule at a high level of quality. Responsible for the quality of the static equipment deliverables. This will also involve input from other experts from throughout UOP
Communicating with project manager on a regular basis regarding progress, changes, budget & schedule
Inspection of fabrication/ construction for conformance with project equipment requirements and applicable codes, as assigned
Assuring the work of others in the group is checked for technical accuracy and compliance with established guidelines and procedures (in area of expertise)
Actively participating to ensure that ISO 9001 certification is maintained.
Providing input and participating in vendor performance evaluation reviews, project close-out reports and subsequent meetings. Acting on applicable specialist group-related RCA’s (root cause analysis) for CAPA’s (corrective & preventive actions) that come out of these reviews.
Following-up on items and lessons learned for applicable specialisation as captured thro’ RCA’s for a CAPA, field reports, establishing root cause and implementing corrective actions.
Supporting and following corporate HS&E policies, in relation to Office & Field Safety practices and engineering design policies.
CRITICAL POSITION SKILLS/ COMPETENCIES:Unique Department Competencies:
Relevant experience in Design and Detailed engineering for Static Equipment (Vessels, Heat Exchangers, Tanks and other static equipment for Turnkey Projects which includes thermal and mechanical design) for the petroleum refining & petrochemical industry.
Knowledge of applicable codes and softwares e.g. HTRI, Compress / PV Elite/ANSYS
Knowledge of inter-disciplinary linkages & interdependencies.
Understanding of Equipment Design and Fabrication techniques, standards and tools.Keen interest in mentoring / knowledge sharing
Ability to maintain and drive unique departmental / technology infrastructure
ADDITIONAL QUALIFICATIONS:
Good analytical skills and sound judgment.
Experience in construction of refinery.Negotiation skills and business acumen are an advantageBASIC QUALIFICATIONS:
Minimum Bachelors degree in Mechanical.
Masters degree may be an asset.
Able to communicate effectively in English.
Additional Information

• JOB ID: req479746
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

DIRECTLY ACCOUNTABLE for:Design and detail engineering of pressure vessels / heat exchangers /Tanks as per international codes such as ASME Section VIII Div.- 1 & 2, PD 5500, TEMA, API 650, API 660, API 661, API 663 and shall have experience with design software Compress, PV Elite, Aspen (B-JAC) and HTRI.Design and fabrication requirements of pressure vessels / heat exchangers and should have good knowledge of fabrication methods and design constraints.
Reviewing of job package and prepare technical clarifications required from customer and prepare contract review summary.
Evaluation of technical specifications applicable for job and ensure that all requirements of specifications and applicable codes are complied during engineering.
Static analysis, including deadweight, multiple pressures, thermal displacements, wind loads, uniform loads, seismic conditions etc.
Following UOP procedures using official tools and templates along with instructions on special customer requirements.
On the basis of UOP-standards and practices, in compliance with Client-requirements, the engineer will prepare/ issue/ revise applicable Technical UOP-specifications for her/ his discipline. These will entail different types of heat exchangers and static equipment like vessels, tanks etc that are compliant with the Client’s requirements and UOP-standards and practices.
Preparing datasheets for various types of static equipment including Heat Exchangers, tanks.
Acting as the Requisitioner for different types of Vessels, heat exchangers, tanks and other static equipment. The engineer manages the relation with and the activities of the shops contracted to supply the equipment.
Reviewing bidder offers received for static equipment during procurement Perform Bid evaluation of quotation received from bidders.
Should have prior knowledge of 3D modeling and should be able to take part in 3D model review
Following-up on static equipment fabrication, including inspection and testing at suppliers' shops.
Providing technical follow-up and inspection reports to Manager/ Project Manager for their follow-up, to ensure technically compliant and timely delivery of equipment from shops contracted by UOP.
Liaising internally with other discipline engineers and departments including Procurement (BUYER).
Review and comment/ approval of vendor procedures/ drawings/ docs. Checking of drawings to ensure complete compliance with customer requirements, design calculations and code requirements.
Providing deliverables within budgeted cost and schedule at a high level of quality. Responsible for the quality of the static equipment deliverables. This will also involve input from other experts from throughout UOP
Providing technical support for fixed/ budgetary price proposals, cost estimates, and design basis data
Communicating with project manager on a regular basis regarding progress, changes, budget & schedule
Inspection of fabrication/ construction for conformance with project equipment requirements and applicable codes, as assigned
Assuring the work of others in the group is checked for technical accuracy and compliance with established guidelines and procedures (in area of expertise)
Actively participating to ensure that ISO 9001 certification is maintained.
Providing input and participating in vendor performance evaluation reviews, project close-out reports and subsequent meetings. Acting on applicable specialist group-related RCA’s (root cause analysis) for CAPA’s (corrective & preventive actions) that come out of these reviews.
Following-up on items and lessons learned for applicable specialisation as captured thro’ RCA’s for a CAPA, field reports, establishing root cause and implementing corrective actions.
Supporting and following corporate HS&Epolicies, in relation to Office & Field Safety practices and engineeringdesign policies.

BASIC QUALIFICATIONS:
Minimum Bachelors degree in Mechanical with 5~8 yrs(max) experience
Masters degree may be an asset.
Able to communicate effectively in English.ADDITIONAL QUALIFICATIONS:
Good analytical skills and sound judgment.
Experience in construction of refinery.Negotiation skills and business acumen are an advantage
Additional Information

• JOB ID: HRD258659
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Key Responsibilities
Own and develop additional technology artefacts (templates, tools, guides, checklists etc..) after handover from development.
Provide post deployment support on technology related issues.
Ensure consistency and standardization of design.
Train/mentor new engineers.
WE VALUE
Familiarity with UOP work processes as well as Refining, Petrochemicals, Sustainable or Gas Processing technologies
Exposure to Software as a Service model
Strong technical leadership
Exposure to various UOP technologies
Working knowledge of UOP digital services
Unisim experience
Demonstrated problem-solving skills
Bachelor’s degree in Chemical Engineering
8+ years in Operations/ Services/Design engineering in Refining/Petrochemical preferably on UOP technologies
Additional Information

• JOB ID: HRD254564
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt