Sheet Metal Assembler jobs at Flex in United States, Fontana
Flex Panel Assembler 2nd Shift United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for relay and control panels according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for relay and control panels.
- Assemble relay and control panel metal cabinets
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in workstation
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Switchgear Assembler United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for switchgear cabinets according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
- Mechanical assembly of components for switchgear cabinets
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in work station
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Switchgear Assembler - Low Voltage 1st Shift United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for switchgear cabinets according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
- Mechanical assembly of components for switchgear cabinets
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in work station
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Building Assembler United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for enclosure buildings according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
- Assemble and install electrical components including panel boards, HVAC units, battery systems, electrical devices, and bending conduit
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in workstation
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Switchgear Assembler - Low Voltage 2nd Shift United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for switchgear cabinets according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
- Mechanical assembly of components for switchgear cabinets
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in workstation
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Switchgear Assembler United States, California, Fontana
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for switchgear cabinets according to specifications.
What a typical day looks like:
Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
Mechanical assembly of components for switchgear cabinets
Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
Identify any product defects; record and report them accordingly
Monitor and maintain inventory of necessary supplies, tools, and parts in work station
Maintain a clean and safe work area
Perform all other duties as assigned
The experience we’re looking to add to our team:
High School Diploma or equivalent
0-2 years of related experience in assembly or manufacturing setting
Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
Strong attention to detail and ability to perform work accurately
Knowledge of manufacturing, equipment maintenance, and safety management
Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
Basic math skills to meet technical specifications and measurements
Basic understanding of tools (ex. Tape measure, impact drill, etc.)
Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
Must be able to lift, push, pull up to 35 pounds at a time.
Must have manual dexterity in order to assemble products or machines as directed.
Must have excellent hand-eye coordination.
Ability to differentiate between colored wires, tabs, and electronic components.
Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Flex Site Installation Assembler 1st Shift United States, California, Fontana
Share
Job Summary
Reporting to the Construction Manager, the Site Installation Assembler will be responsible for working in the field to install our pre-fabricated enclosure buildings using an array of tools and equipment.
: 6:00am-2:45pm
What a typical day looks like:
Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for enclosure buildings
Assemble and install electrical components including panel boards, HVAC units, battery systems, electrical devices, and bending conduit
Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
Identify any product defects; record and report them accordingly
Monitor and maintain inventory of necessary product for each job
Maintain a clean and safe work area
Perform all other duties as assigned
The experience we’re looking to add to our team:
High school diploma or equivalent required
Experience in wiring and installing electrical control/relay panels or mechanical assembly
Experience working with a manufacturing or construction environment preferred
OSHA 10 Construction Certification preferred or must be obtained within the first 30 days of employment.
Current Driver's License and ability to pass an MVR to operate company vehicles
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
Share
USA, Fontana Ca.
Reporting to theis responsible for assembling fabricated metal parts for relay and control panels according to specifications.
What a typical day looks like:
- Review, analyze, and follow various blueprints, diagrams, drawing, procedures, and work instructions to complete assemblies for relay and control panels.
- Assemble relay and control panel metal cabinets
- Uses various power tools and hand tools (ex. Drills, impacts, screwdrivers, grinders, etc.) to accomplish assigned tasks
- Conduct quality assurance checks to confirm that assembled products meet specifications and quality standards
- Identify any product defects; record and report them accordingly
- Monitor and maintain inventory of necessary supplies, tools, and parts in workstation
- Maintain a clean and safe work area
- Perform all other duties as assigned
The experience we’re looking to add to our team:
- High School Diploma or equivalent
- 0-2 years of related experience in assembly or manufacturing setting
- Prior experience operating powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
- Strong attention to detail and ability to perform work accurately
- Knowledge of manufacturing, equipment maintenance, and safety management
- Reading comprehension skills with the ability to interpret and follow written directions, blueprints, wiring drawings, schematics, and engineering diagrams
- Basic math skills to meet technical specifications and measurements
- Basic understanding of tools (ex. Tape measure, impact drill, etc.)
- Demonstrated proficiency with the ability to safety operate powered equipment (forklift, reach truck, scissors lift, overhead crane, etc.)
What the physical requirements are:
- Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
- Must be able to lift, push, pull up to 35 pounds at a time.
- Must have manual dexterity in order to assemble products or machines as directed.
- Must have excellent hand-eye coordination.
- Ability to differentiate between colored wires, tabs, and electronic components.
- Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
What you'll receive for the great work you provide:
- Full range of medical, dental, and vision plans
- Life Insurance
- Short-term and Long-term Disability
- Matching 401(k) Contributions
- Vacation and Paid Sick Time
- Tuition Reimbursement
These jobs might be a good fit
