Assistant Manager - Process Engineering jobs at Flex in India, Coimbatore

What a typical day looks like:

• Work with Design and Manufacturing Engineers team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements.
• Support in supplier approval process by assessingmanufacturing/technologycapabilities and Health, Safety and Environmental risks.
• Support new product launches to ensure that supplier quality meets the required standards.
• Follow up with suppliers for root cause analysis and corrective actions of supplier quality issues.
• Review supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities.
• Promote the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, and Process Failure Mode and Effects Analysis (PFMEA)
• Provide concise, complete, and accurate documentation of inspection results relative to area of responsibility.
• Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers.
• Support the Quality Manager to monitor and report on supplier product quality and performance.
• Report on Key Performance Indicators (KPIs) to adhere to process and prevent occurrence of any non-conformity relating to product, process, or system.
• Preparation & Validation of First Article Inspection
• Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements.
• Manage and coordinate supplier Material / Non-Material cost recovery for Supplier Quality issues.
• Support in Internal /External Audit readiness
• Undertake special projects as required.
• Contribute to continuous improvement activities.
• Quality control of work by appropriate reviews
• Testing oscilloscope, cable and harness testing, trouble shooting, component testing, logicanalyzer.
• Inspection on bare board, systems, components, cable and harness, microscope, measuring tools.
• Mechanical & Electrical Tools, taps and dies, alignment tools, measuring tools.
• Write reports and present progress at project meetings and to clients.
• Conduct benchmarking studies to determine best practices/designs and future trends.
• Stay current and up to date on any changes that may affect the supply and demand of needed products and materials and advise others of any impact.
• Building big data collection and analytics capabilities to uncover customer, product, and operational insights.
• Analyzing data sources and proposing solutions to strategic planning problems on a one-time or periodic basis
• Providing data-driven decision support
• Leverages data analytics and statistical methods to optimize manufacturing processes, improve product quality, and enhance operational efficiency.
• Conduct benchmarking studies to determine best practices/designs and future trends.

The experience we’re looking to add to our team:

• Diploma in EEE / ECE / Mech / E&TC or B.Sc in Physics / ECS
• 0 to 2 years’ experience in Automotive Industry /EMS / Electronics Products Manufacturing IndustryMinimum 0-2 experience in Automotive Industry /EMS / Electronics Products Manufacturing Industry.
• Knowledge in Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA)Use of the following tools may be required: Electronic Assembly: color code, component,schematics.
• Knowledge in various PCB operations, Lean manufacturing, and ISO standards
• Handled computerized electronic test equipment and programming.
• Knowledge of Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA)
• Knowledge of measurement techniques
• Experienced in understanding and interpretation of engineering drawings.
• Understanding manufacturing processes
• Planning and prioritizing activities
• Good communication and interpersonal skills
• Open to night shift

What you’ll receive for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

What a typical day looks like:

• Knowledge on Electronics components and PCBA
• Support Engineering team for Manufacturing process.
• Knowledge on Work instruction, process flow.
• Knowledge in SMT process.
• Knowledge in Quality Management System.
• Knowledge in Engineering Change Management process.
• Creative and innovative thought on PCBA Document creations for NPI products.
• Liaise with Process and manufacturing team to come up with detailed manufacturing information (When needed)
• Adhere to process and look for possible process improvements.
• Knowledge in PLM/ERP Tools.

• Diploma / B.Sc. – Electronics / Physics graduate with (0-2) years of experience asPCBA Process / Manufacturing / Assembly, Preferably in EMS Industry.
• Experienced in technical document preparation.
• Knowledge in SMT process.
• Good English Communication skill
• Should have good Microsoft Office
• Good analytical skills and logical thinking.
• Should be open for shifts.

What you’ll receive for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

What a typical day looks like:

• Work with Design and Manufacturing Engineers team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements.
• Support in supplier approval process by assessingmanufacturing/technologycapabilities and Health, Safety and Environmental risks.
• Support new product launches to ensure that supplier quality meets the required standards.
• Follow up with suppliers for root cause analysis and corrective actions of supplier quality issues.
• Review supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities.
• Promote the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, and Process Failure Mode and Effects Analysis (PFMEA)
• Provide concise, complete, and accurate documentation of inspection results relative to area of responsibility.
• Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers.
• Support the Quality Manager to monitor and report on supplier product quality and performance.
• Report on Key Performance Indicators (KPIs) to adhere to process and prevent occurrence of any non-conformity relating to product, process, or system.
• Preparation & Validation of First Article Inspection
• Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements.
• Manage and coordinate supplier Material / Non-Material cost recovery for Supplier Quality issues.
• Support in Internal /External Audit readiness
• Undertake special projects as required.
• Contribute to continuous improvement activities.
• Quality control of work by appropriate reviews
• Testing oscilloscope, cable and harness testing, trouble shooting, component testing, logicanalyzer.
• Inspection on bare board, systems, components, cable and harness, microscope, measuring tools.
• Mechanical & Electrical Tools, taps and dies, alignment tools, measuring tools.
• Write reports and present progress at project meetings and to clients.
• Conduct benchmarking studies to determine best practices/designs and future trends.
• Stay current and up to date on any changes that may affect the supply and demand of needed products and materials and advise others of any impact.
• Building big data collection and analytics capabilities to uncover customer, product, and operational insights.
• Analyzing data sources and proposing solutions to strategic planning problems on a one-time or periodic basis
• Providing data-driven decision support
• Leverages data analytics and statistical methods to optimize manufacturing processes, improve product quality, and enhance operational efficiency.
• Conduct benchmarking studies to determine best practices/designs and future trends.

The experience we’re looking to add to our team:

• Bachelor’s degree in EEE / ECE / Mech / E&TC
• Minimum 3-6 experience in Automotive Industry /EMS / Electronics Products Manufacturing Industry.
• 3-6 years of knowledge in Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA)Use of the following tools may be required: Electronic Assembly: color code, component,schematics.
• Knowledge in various PCB operations, Lean manufacturing, and ISO standards
• Handled computerized electronic test equipment and programming.
• Knowledge of Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA)
• Knowledge of measurement techniques
• Experienced in understanding and interpretation of engineering drawings.
• Understanding manufacturing processes
• Planning and prioritizing activities
• Good communication and interpersonal skills
• Open for all shifts

What you’ll receive for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

What a typical day looks like:

• Recognize the manufacturing process, technologies, techniques and the product.
• Define, implement and evaluate proposed designs and processes for manufacturability.
• Support Industrial Engineering process.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable and reproducible process parameters.
• Develop, implement and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and through put.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during new technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide costimprovement/reductionprograms

The experience we’re looking to add to our team:

• Diploma / bachelor’s degree – ECE / EEE / Mechanical with 4 - 7 years of experience in manufacturing industry preferably in EMS Industry.
• Knowledge in SMT Process, PCBA, Mechanical assembly, Manufacturing tools and fixture design etc.,
• Knowledge in Industrial Engineering process
• Knowledge in Manufacturing process analysis
• Recognize the manufacturing process, technologies, techniques, and the product.
• Handle the cycle time study and line balance
• Knowledge in OEE and Line utilization calculation.
• Participate in activities pertaining to cycle time and process improvements.
• Should have very good knowledge in Manufacturing tool designing process.
• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Develop and maintain process documentation.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Participate in activities pertaining to cycle time and process improvements.
• Able to define DFx procedures and check lists.
• Knowledge in DFx tools and hands on experience in DFM module software such Vayopro, Valor NPI , SolidWorks etc would be added advantage
• Knowledge in 3D designs of product and simulation of product assembly process.
• Aptitude to work with a multi-functional team to define requirements and suitable metrics for the performance of new products and process.
• Knowledge & direct experience in NPI operations and manufacturing engineering.
• Able to perform root cause analysis and resolve problems.
• Experience with Continuous Process Improvement, Kanban, and Lean manufacturing principals.
• Flexibility and adaptability to work in a dynamic startup environment.
• Work with other engineering team members to improve existing design or Process.
• Knowledge of MS office and MS outlook
• Excellent written and oral communication skills MANDATORY.
• Good analytical skills.
• Coaching & mentoring skills.
• Should be open for shifts.

What you’ll receive for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

located in.
What a Typical day looks like:

• Work with Engineering (Design and Manufacturing Engineers) team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements

• Support in supplier approval process by assessingmanufacturing/technologycapabilities and Health, Safety and Environmental risks

• Support new product launches to ensure that supplier quality meets the required standards

• Follow up with suppliers for root cause analysis and corrective actions of supplier quality issues

• Review supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities

• Promote the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, and Process Failure Mode and Effects Analysis (PFMEA)

• Provide concise, complete and accurate documentation of inspection results relative to area of responsibility. In appropriate functional areas, this refers to supporting inspection and test status requirements defined by regulations, engineering product specifications or Control Plans, Production Part Approval Process (PPAP) approval or product warrant submission

• Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers

• Support the Quality Manager to monitor and report on supplier product quality and performance

• Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system

• Preparation & Validation of First Article Inspection

• Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements

• Manage and coordinate supplier Material/Non Material cost recovery for Supplier Quality issues

• Support in Internal /External Audit readiness

• Undertake special projects as required

• Contribute to continuous improvement activities

• Quality control of work by appropriate reviews

• Write reports and present progress at project meetings and to clients

• Conduct benchmarking studies to determine best practices/designs and future trends

• Stay current and up to date on any changes that may affect the supply and demand of needed products and materials and advise others of any impact.

• Building big data collection and analytics capabilities to uncover customer, product, and operational insights

• Analyzing data sources and proposing solutions to strategic planning problems on a one-time or periodic basis

• Providing data-driven decision support

• Leverages data analytics and statistical methods to optimize manufacturing processes, improve product quality, and enhance operational efficiency.

• Conduct benchmarking studies to determine best practices/designs and future trends.
  

The experience we’re looking to add to our team:

• 4- 6 years of experience as a in a Manufacturing set up.

• Good to have expertise insupplier quality function.

• B.E Electronics and Communication Engineering / EEE /Electronics/Mechanical.

• Knowledge of MS office and MS outlook

• Sound Knowledge on technical subject.

• Good written and oral communication skills

• Very Good analytical and logical reasoning skills

• Good Attitude

• Ready to work in night shifts

What you’ll receive for the great work you provide:

• Health Insurance

• Paid Time Off

Required Skills:

Optional Skills:

Required Skills:

Optional Skills:

What a typical day looks like:

• Knowledge in DFM & DFA methodologies, PCB Fabrication analysis , PCBA assembly analysis , DRC check etc..

• Skilled in process, such as: Stencil Fabrications, Solder paste printing, SMT process, Through Component soldering, ICT , Functional Test , Box Build Assembly and PCB Fabrications.

• Should have very good knowledge in IPC standards. Knowledge in PCB layers, PCB design and electronics component packages in all levels.

• Knowledge in DFx tools and hands on experience in DFM module software such Vayopro, Valor NPI etc..

• Aptitude to work with a multi-functional team to define requirements and suitable metrics for the performance of new products and process

• . Knowledge & direct experience in NPI operations and manufacturing engineering.

• Able to perform root cause analysis and resolve problems Experience with Continuous Process Improvement, Kanban and Lean manufacturing principals.

• Flexibility and adaptability to work in a dynamic startup environment Work with other engineering team members to improve existing design or Process.

• Knowledge of MS office and MS outlook Excellent written and oral communication skills MANDATORY. Good analytical skills. Reporting & Decision-making skills.

• Design for Manufacturing, PCBA- Assembly process, SMT Process, PTH Assembly Process, Understanding of PCB cad data. Knowledge in PCBA Assembly design guidelines.

The experience we’re looking to add to our team:

• Candidates Must from BE/Btech Electronics Manufacturing / Process Engineering field

• 0-2 year of experience in PCBA Process / Manufacturing / Assembly Process

• Experienced in technical document preparation.

• Knowledge in SMT process

• Flexibility and adaptability to work in a dynamic startup environment Work with other engineering team members to improve existing design or Process.

• Knowledge of MS office and MS outlook Excellent written and oral communication skills MANDATORY. Good analytical skills. Reporting & Decision-making skills.

• Should have good Microsoft Excel, Power Point & Word skills .

• Should be open for Night Shift.

Here are a few examples of what you will get for the great work you provide:

• Paid Time Off

• Health Insurance

Required Skills:

Optional Skills: