Engineer - Process Engineering jobs at Flex in India, Chennai

What a typical day looks like:

• Global Deployment: Implement and oversee the deployment of Global Industrial and Systems Engineering standardization systems that support the Flex Future Factory initiatives.
• Methodology Standardization: Standardize methodologies and processes for work measurement within Flex Industrial Engineering to promote consistency and efficiency across operations following the Flex Work measurement blueprint.
• The work method techniques used shall / and not limited to stopwatch time study, pre-determined Motion Time System, work sampling, and hybrid techniques for standard time setting required at various types of Flex operation work.
• Manufacturing Resource Optimization: Establish standardized Industrial and Systems Engineering applications to analyze manufacturing resources, for e.g. standard time, work method, ensuring optimal resource allocation and installation planning.
• Process Facilitation: Drive the standardization of processes related to standards management, resource optimization, and productivity performance management, ensuring alignment with organizational goals.

The experience we’re looking to add to our team:

• B.E(ECE/EEE/E&I) graduate with 6 - 8 years of experience as a Engineer in Manufacturing set up, preferably in EMS industry
• Expertise: Demonstrated expertise of Work Measurement studies, Standard Work, Balancing lines, use of PMTS (Predetermined Time Motion System) mainly MOST and MTM
• Flexibility and adaptability to work in a dynamic startup environment.
• Work with other engineering team members to improve existing design or Process.
• Knowledge of MS office and MS outlook.
• Excellent written and oral communication skills MANDATORY.
• Good analytical skills.
• Reporting & Decision-making skills
• open for all shifts

What you’ll receive for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

located in

Detailed roles & responsibilities:

• Keeps track of received data and source documents.

• Prepares and sorts source documents, and identifies and interprets data to be entered.

• Types process and status reports, and assigns and monitors document numbers.

• Receives all forms of product documentation (electronic and hard copy). Performs data validation tasks by checking the information vs. alternate data sources.

• Contacts those preparing source documents to resolve questions, inconsistencies or missing data.

• Performs data corrections according to direction.

• Enters alphabetic, numeric or symbolic data from source documents into computer following format displayed on screen, and enters necessary codes.

• Collects and distributes documentation required for processing Engineering Change Orders (ECO's).

• Collects and reports process performance metrics.

• Tracks work completed by customer program for reporting purposes.

The experience we’re looking to add to our team:

• Diploma E&TC or Electrical with 0 to 2 years of experience in EMS industries/Process engineering.

• Should be willing to work in any shift.

What you’ll receive for the great work you provide:

• Health Insurance

• Paid Time Off

Required Skills:

Optional Skills:

located in

What a typical day looks like

• Creating part numbers for BOM in agile & Baan Creating AVL in agile & Baansystem.
• Downloading customer documents like product specifications etc & releasing same in CDC Work as a Change Analysts during NPI for new changes.
• Release Part list to production for new models & after implementation ofECO's
• Efficiently managing ECOs for manufacturing sites across the globe Use Agile (PLM) system for ECO (Engineering Change Order) creation, reviewing , routing, tracking, releasing anddistribution.
• Study the ECOs / Drawings closely and coordinate with the site Process / Product Engineeringteam
• Work closely with Engineering and materials teams to review product updates /modifications.
• Respond to Business Partner (requestor) and customer on queries relating to Engineering Change Orders Ensure adherence to targets set for all Process Metrics.
• Good in People management & Leadership skills

• B.E. (EEE/ECE) / M.Sc (Physics / ECS) graduatewith (0 - 2)years of experience as a NPI/ECO Engineer in Manufacturing set up, Preferably in EMS Industry.
• Hands on experience in the following domains NPI (New Product Introduction) ECO (Engineering Change Order management) BOM (Bill Of Materials) Management Hands on Experience in any PLM software linked to ECO process
• Excellent written and oral communication skills in EnglishMANDATORY.
• Knowledge of MS office and MSoutlook
• Good analyticalskills.
• Coaching & mentoring skills. Conflictresolution.

What you’ll receive for the great work youprovide:

• HealthInsurance
• Paid TimeOff

Required Skills:

Optional Skills:

located in

What a typical day looks like

• Creating part numbers for BOM in agile & Baan Creating AVL in agile & Baansystem.
• Downloading customer documents like product specifications etc & releasing same in CDC Work as a Change Analysts during NPI for new changes.
• Release Part list to production for new models & after implementation ofECO's
• Efficiently managing ECOs for manufacturing sites across the globe Use Agile (PLM) system for ECO (Engineering Change Order) creation, reviewing , routing, tracking, releasing anddistribution.
• Study the ECOs / Drawings closely and coordinate with the site Process / Product Engineeringteam
• Work closely with Engineering and materials teams to review product updates /modifications.
• Respond to Business Partner (requestor) and customer on queries relating to Engineering Change Orders Ensure adherence to targets set for all Process Metrics.
• Good in People management & Leadership skills

• B.E. (EEE/ECE) / M.Sc (Physics / ECS) graduatewith (0 - 2)years of experience as a NPI/ECO Engineer in Manufacturing set up, Preferably in EMS Industry.
• Hands on experience in the following domains NPI (New Product Introduction) ECO (Engineering Change Order management) BOM (Bill Of Materials) Management Hands on Experience in any PLM software linked to ECO process
• Excellent written and oral communication skills in EnglishMANDATORY.
• Knowledge of MS office and MSoutlook
• Good analyticalskills.
• Coaching & mentoring skills. Conflictresolution.

What you’ll receive for the great work youprovide:

• HealthInsurance
• Paid TimeOff

Required Skills:

Optional Skills:

in

What a typical day looks like:

• Perform DFM for injection molds.
• Analysis of the plastic parts & Moldflow simulation tool
• Tool Design of injection molds.
• Root cause analysis of injection molds.
• In depth knowledge in tool design using Solidworks / NX (Unigraphics)
• Knowledge of Lean Manufacturing perform 8Ds, 5 Whys

The experience we’re looking to add to our team:

• Bachelor degree in (EEE/ECE) graduate with (3-5) years of experience as a NPI/SMT, Process Engineer in Manufacturing set up, Preferably in EMS Industry
• Plastic Manufacturing industry with experience in tool design.

Here are a few examples of what you will get for the great work you provide:

• Paid Time Off
• Health Insurance

Required Skills:

Optional Skills:

What a Typical day looks like:

• Develops and initiates standards and methods for inspection, testing and evaluation.
• Develops and implements methods and procedures for disposition of discrepancy material and devises methods to assess cost.
• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability.
• Compiles and writes training material and conducts training sessions on quality control activities.
• Holds up Product Engineers and Quality Program Managers with customer interfaces as necessary on quality related issues.
• Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• Initiates corrective action requests as needed and tracks to satisfactory completion.
• Assists with development and implementation of quality audits.
• In charge of developing, applying, revising and maintaining quality standards for processing materials into partially finished or finished products.
• Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• Explores reports and returned products and recommends corrective action.
• Establishes program to evaluate precision and accuracy of production equipment and testing, measurement and research of equipment and facilities.
• Approves product, process and equipment qualifications.

• Support in supplier approval process by assessingmanufacturing/technologycapabilities and Health, Safety and Environmental risks
• Support new product launches to ensure that supplier quality meets the required standards
• Follow up with suppliers for root cause analysis and corrective actions of supplier quality issues
• Review supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities
• Promote the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke (Error Proofing), Measurement System Analysis, and Process Failure Mode and Effects Analysis (PFMEA)
• Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers

The experience we’re looking to add to our team

• B.E / B.Tech in ECE / EEE / IC / Mechanical / Mechatronics with (0-2) years of experience in Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), Failure Mode and Effect Analysis (FMEA) in Manufacturing set up, Preferably in EMS Industry.
• Lean Manufacturing knowledge.
• Knowledge of quality and business systems
• Knowledge of TS16949
• Knowledge of measurement techniques
• Understanding and interpretation of engineering drawings
• Understanding manufacturing processes
• Ability to work in a diverse and dynamic environment
• Planning and prioritizing activities
• Good communication and interpersonal skills
• Good Excel skill

Here are a few examples of what you will get for the great work you provide:

• Health Insurance
• PTO

Required Skills:

Optional Skills:

located in

Detailed roles & responsibilities:

• Keeps track of received data and source documents.

• Prepares and sorts source documents, and identifies and interprets data to be entered.

• Types process and status reports, and assigns and monitors document numbers.

• Receives all forms of product documentation (electronic and hard copy). Performs data validation tasks by checking the information vs. alternate data sources.

• Contacts those preparing source documents to resolve questions, inconsistencies or missing data.

• Performs data corrections according to direction.

• Enters alphabetic, numeric or symbolic data from source documents into computer following format displayed on screen, and enters necessary codes.

• Collects and distributes documentation required for processing Engineering Change Orders (ECO's).

• Collects and reports process performance metrics.

• Tracks work completed by customer program for reporting purposes.

The experience we’re looking to add to our team:

• Diploma E&TC or Electrical with 0 to 2 years of experience in EMS industries/Process engineering.

• Should be willing to work in any shift.

What you’ll receive for the great work you provide:

• Health Insurance

• Paid Time Off

Required Skills:

Optional Skills: