Quality Control Inspection Technician Iv - T4 jobs at Applied Materials in United States, Tempe

Key Responsibilities

-Prepares wafers for experimentation. May include cleaning. Loads wafers, prepares reactor for experimentation and cleans reactors. Operates reactor to perform various processes including metrology. Recommends performance of process system and troubleshooting.

-Coordinates with engineering on wafer evaluations. Sets up equipment for fairly complex experiments.

- Perform routine shut down procedures. Identify problem put tool down and call for service.

-Checks performance of process system and acts on making it compliant to best known method (BKM).

- Records process conditions and experimental observations. Evaluates wafers and coupons, including modification of the process recipes.

- Prepares graphs and tables summarizing results.

- Coordinates with process engineers on wafer evaluations. Sets up equipment for experiments.

-Orders equipment and supplies, and coordinates with vendors and purchasing. Coordinates instrument repair and maintenance.

-Uses quantitative wafer evaluation and process instrumentation knowledge to draw conclusions from data. Assists in training lower level technicians.

- Develop and publish best known method (BKM) procedures including, sample prep, and special sample handling.

-Knowledgeably operates laboratory process equipment and instrumentation.

Functional Knowledge

-Has developed advanced specialized expertise within aanalytical/scientificarea to perform the most complex work

Problem Solving

Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent

Interpersonal Skills

Exchanges ideas and information effectively; uses tact and diplomacy when dealing with others

This is a physically demanding position that often requires extensive walking, standing for extended periods of time, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Key Responsibilities

1. Performs complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.
2. Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems with minimal supervision. Assignments require solution of difficult problems by application of technical knowledge. May perform more complicated or complex new system and NPI installations and field upgrades.
3. May work from limited or no documentation. Investigates, compiles data, documents and recommends changes using applicable reporting process to enhance product performance.
4. Compiles logbooks and test procedures documentation utilizing good writing skills. Assists in revising, developing and implementing documented procedures. Writes complex technical reports and test procedures.
5. Performs mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.
6. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
7. Requires full understanding of the company's manufacturing and/or engineering processes, as well as excellent interpersonal and communication skills to effectively interface acrossdepartmental/functionallines. Provides management with technical input in order to correct problems both at the system level and in the manufacturing process.
8. Provides training to lower level Engineering Technicians. Recognized as technical resource for a particular platform or product. Highly proficient at troubleshooting and resolving issues. Effective at providing standard work and workmanship skills training. Works closely with Engineering in the development of procedures and documentation for NPI. May serve as a "Quality Lead".

Functional Knowledge

• Has developed advanced specialized expertise within aanalytical/scientificarea to perform the most complex work

Business Expertise

• Has a good understanding of how related teams coordinate their efforts and resources to achieve objectives

Leadership

• May act as a lead for the team, may allocate work and provide subject matter guidance to more junior team members

Problem Solving

• Exercises judgment, based on previous experience, practices and precedents, to identify and solve problems that arise with little or no precedent

Impact

• Impacts the effectiveness of own team and closely related teams

Interpersonal Skills

• Exchanges ideas and information effectively; uses tact and diplomacy when dealing with others

Key Responsibilities

Performs a variety of complex electrical trade functions such as the inspection, repair, installation, modification, and maintenance of electrical equipment, systems, and circuits.

Diagnoses trouble in the electrical system or plant equipment.

Uses specialized measuring and testing instruments such as voltmeters, ammeters, wattmeters, ohmmeters and meggers.

Makes standard computations relating to load requirements of wiring or electrical equipment.

Makes daily, periodic, or special inspections of the premises to determine repair work necessary. Includes maintaining and repairing the facility's structure, equipment and grounds, including plumbing and HVAC

Work from blueprints, drawings, or rough sketches. Performs skilled trades works, such as carpentry or painting in the construction, repair or alteration of structures such as walls, roofs or office fixtures.

Works with manufacturing or process engineering in the installation or repair of building mechanical and or plumbing.

Oversees contractor-supplied maintenance services, including janitorial, landscape, HVAC servicing and rubbish removal.

Other Requirements:

This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

This position requires the use of appropriate Personal Protective Equipment (PPE) including but not limited to welding helmets, hand shields, goggles, respirators, fire/flame resistant clothing and aprons, and gloves. Additional PPE will be required for positions involving work in a clean room environment.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives
• Preference for someone with prior CNC expertise (repairs, service, maintenance)

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Key Responsibilities

• Utilizes work orders, schematics, wiring diagrams, engineering specifications, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs a wide variety of electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
• Checks own work for conformance to specifications.
• Good working knowledge of job assignments.
• Details finished work.
• Receives parts and performs audits to ensure all necessary parts are available to perform build, test and repair.
• Inspects parts for defects.
• Troubleshoots and improves processes.

Other Requirements:

• This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.
• Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

• Ensure product entering operations or inventory meets all design requirements by confirming dimensional characteristics, visual/cosmetic attributes, functional operation and supporting documentation review.

• Designs and implements inspection methodologies and procedures for part qualifications.

• Conduct newequipment/methodologyqualification.

• Audit focal for metrology related internal/external audits.

• Schedule and lead gage R&R studies. Conduct review and training on gage R&R internally.

• Coaches, mentor and conduct training for extended AMAT teams on advanced use of inspection tools and methodologies.

• Identifies and leads continuous improvement projects. Reduces qualification cycle time and cost within respective site while still meeting reliability performance requirements.

Functional Knowledge

• Demonstrates depth and/or breadth of expertise in own specialized discipline or field.

Business Expertise

• Interprets internal/external business challenges and recommends best practices to improve products, processes or services.

Leadership

• May lead functional teams or projects with moderate resource requirements, risk, and/or complexity.

Problem Solving

• Leads others to solve complex problems; uses sophisticated analytical thought to exercise judgment and identify innovative solutions.

Impact

• Impacts the achievement of customer, operational, project or service objectives; work is guided by functional policies.

interpersonal Skills

• Communicates difficult concepts and negotiates with others to adopt a different point of view.

General Profile:Requires knowledge and experience in own discipline; still acquiring higher-level knowledge and skills. Builds knowledge of the company, processes and customers. Solves a range of straightforward problems. Analyzes possible solutions using standard procedures. Receives a moderate level of guidance and direction.

Key Responsibilities

• Develops, applies, revises, maintains and/ or tests quality/ reliability standards to ensure alignment with customer expectations.
• Designs and implements methods and procedures for inspecting, testing and evaluating the quality/ reliability of products
• Develops, implements quality/ reliability test plans and performs failure analysis.
• Gathers operational and test data and evaluates results. Prepares documentation for testing.
• Develops methods and parameters, project methodology and/ or project proposals.
  Evaluates work methods, procedures and policies to ensure world class quality standards are attainable.
• Perform FMECA, document CRAMS and work with supplier and engineer to enable crams test plan. Also perform PQP at supplier.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Bachelor's Degree
1 - 2 Years

Key Responsibilities

• Utilizes work orders, schematics, wiring diagrams, engineering specifications, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, vacuum, pneumatic assemblies, subassemblies and components.
• Performs a wide variety of electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors. Highly effective at providing standard training.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and sepractices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipmeequipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on progress, work expense and labor details. May perform computer programming, repair or software
• Checks own work for conformance to specifications. Thorough working knowledge of job assignments. Details finished work. Receives parts and performs audits toavailable to perform build, test and repair. Inspects parts for defects. Advanced troubleshooting capability and process improvement.
• Recognized as a resource for a particular product(s) or platform(s). Highly proficient with assembly test processes and troubleshooting required to solve quality issues
• Works closely with engineering on development of procedures and New Product Integration into the manufacturing line. Able to provide input on product "manufacturing design.
• Provides training and support to lower level mfg. technicians and assemblers. May serve as Quality Lead and focal point for quality processes within the department tools to lead problem solving. May lead Kaizens or DMIAC for work center or unit. Able to assist with quality issues at a customer site and provide feedback to improve. Assist supervisor in alignment of resources to daily production needs.

This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some indoor noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safe chemical aprons, and face shields may be required.

Has comprehensive understanding of a range of processes, procedures, systems and concepts within own discipline

Resolves problems by identifying and selecting solutions and applying methods, techniques, experience and precedents; exercises judgment within generally
Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors

Demonstrates tact and diplomacy to exchange ideas and information in a concise and logical way

Associate's Degree
7 - 10 Years