Manufacturing Engineering Intern jobs at Applied Materials in Singapore, Singapore

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma

• Work experiences in semiconductor/ assembly/ electronics industry

• Must be able to work in a cleanroom environment

• Ability to follow standard operation procedures (written and verbal)

• Knowledge of basic hand tools

• Must be open to Mon - Fri work week (4pm - 1.30am shift). Transport and shift allowance provided.

Work Location

Key Responsibilities

• Creates and monitors metrics to better understand discrepant material trends.

• Investigates data trends for actions and projects to reduce manufacturing generated discrepant material and scrap.

• Assign discrepant material reduction tasks and projects to personnel outside the Quality organization and track assignments to completion.

• Facilitate meetings to receive updates on tasks and projects.

• Provide training as necessary to Operations personnel.

• In a few cases, may need to develop and implement operational sequence and processes in the fabrication of parts, components, sub-assemblies, and final assemblies and lead manufacturing engineering related projects as required.

• Interfaces with other engineering functions to ensure new product has implemented changes which mitigate the risk of discrepant material being generated.

• Determines root cause analysis for issues that arise during assembly and/or test of systems; drives correction actions; provides failure analysis report as required.

• Uses lean six sigma methodology to drive continuous improvement projects.

• Collaborate with Supplier Quality Engineers to minimize supplier caused Quality non-conformances

  • Quick engagement with Supplier Quality Engineers to manage responsiveness of suppliers to Mfg. issues with a focus on keeping manufacturing operational.

  • Engagement on stock purges or containments in manufacturing while working with the Manufacturing Engineers to assess the product and prevent a line down

  • Follow up with Supplier Quality Engineers and keep Manufacturing abreast of progress

• Evaluates work methods, procedures, and policies. Develops and maintains new business processes; edits as necessary to ensure current practices are documented.

Requirements

• Bachelor's Degree in Engineering, Science or other relevant qualifications.

• At least 3 years of quality engineering experiences preferably in manufacturing or semiconductor industry

• Professional qualifications in Quality will be an added advantage.

• Proficiency in quality analysis tools and statistical software (e.g., Minitab).

• Familiarity with Lean Manufacturing and Six Sigma principles (Green Belt preferred).

• Excellent problem-solving, analytical, and communication skills.

• Ability to work cross-functionally and manage multiple projects in a fast-paced environment across different time zones.

Work Location

• Upper Changi

Key Responsibilities

• Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing

• Coordinates design requirement review with appropriateengineering/scientificpersonnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications

• May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes

• Partner with the customers and the Business Units for assigned projects, ensuring clear understanding of customer issues and delivery of applicable solutions.

• Provide technical support to manufacturing and product teams to resolve process-related challenges and optimize production efficiency.

• Collaborate with global teams, customers, and partners to accelerate the adoption of new technologies and processes.

• Maintain rigorous documentation of process development activities, experiments, and outcomes.

• Participate in cross-functional meetings to ensure alignment between engineering, marketing, and business objectives.

• Drive adoption of new technologies through demos, evaluations, joint development programs, and tool qualifications.

• Manage and develop a team of Process Engineers, ensuring training, certification, and performance excellence.

• Responsible for demand planning and financial forecasting for PE activities.

• Contribute to business plans and resource allocation to meet organizational priorities.

• Demonstrate advanced integration knowledge across multiple processes and technologies.

• Resolve complex technical and operational issues using structured problem-solving approaches.

Requirements

• PhD/ Master/ Bachelor in Engineering studies

• 7 years and above of process-related experiences in semiconductor industry with at least 3 years in leadership roles.

• Prior work experiences in a technical support or field service role will be an added advantage

• Strong technical background in semiconductor processes and equipment.

• Excellent communication and interpersonal skills for customer-facing interactions.

• Ability to manage multiple teams and projects simultaneously.

Work Location

• Science Park II (Moving to Tampines in end 2026)

Key Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Requirements

• ITE/ Diploma

• Work experiences in semiconductor/ assembly/ electronics industry

• Must be able to work in a cleanroom environment

• Ability to follow standard operation procedures (written and verbal)

• Knowledge of basic hand tools

• Must be able to work Monday - Friday (4pm - 1.30am). Transport provided.

Work Location

• Upper Changi/ Tampines

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components

• Performs electro-mechanical assembly operations, troubleshooting and repair

• Identifies and corrects errors

• Observes all safety standards and maintain a secure, safe, clean and healthy work environment

• Attends required health and safety training and follows safety and security policies, procedures and practices

• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept

• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly

• Actively strives to prevent accidents and injuries

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components

• Enters data on computer terminal, such as progress, work expense and labor details

• May perform computer programming, repair or software

• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities

• Has good understanding of how the team integrates with others

• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods

• Good communication skills to exchange of information

• Ability to commit Monday - Friday (4pm - 1.30am). Transport will be provided.

Work Location

• Upper Changi/ Tampines

Key Responsibilities

• Assists Tool owner in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

• Uses escalation policies as required to keep management informed of down situations.

• Performs daily, weekly, monthly, quarterly, bi-annual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Work together with fellow Amat Process personnels in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

• Assist in start-up, retrofit and relevant CIPs. Provides technical assistance to less experienced Applied personnel when required. Uses training and experience to identify some process related system problems.

• Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Preferably possess a working knowledge of Statistical Process Control, Quality Improvement Process methods, Risk Assessment and semiconductor industry terminology.

• Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of dailyresponsibilities.

Requirements

• ITE/ Diploma in Engineering or relevant studies

• Basic understanding on semiconductor process/ equipment is preferred

• Past experiences in handling AMAT equipment will be an added advantage

• Must be able to commit normal work hours (non-shift) from Monday - Friday in the beginning and open to change to shift work at a later stage

Work Location

• Science Park II (Moving to Tampines in end 2026)

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components

• Performs electro-mechanical assembly operations, troubleshooting and repair

• Identifies and corrects errors

• Observes all safety standards and maintain a secure, safe, clean and healthy work environment

• Attends required health and safety training and follows safety and security policies, procedures and practices

• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept

• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly

• Actively strives to prevent accidents and injuries

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components

• Enters data on computer terminal, such as progress, work expense and labor details

• May perform computer programming, repair or software

• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities

• Has good understanding of how the team integrates with others

• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods

• Good communication skills to exchange of information

• Able to commit Mon-Fri (4pm - 1.30am shift). Transport provided.

Work Location

• Upper Changi