Hardware Support Technician jobs at Applied Materials in Singapore, Singapore

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components

• Performs electro-mechanical assembly operations, troubleshooting and repair

• Identifies and corrects errors

• Observes all safety standards and maintain a secure, safe, clean and healthy work environment

• Attends required health and safety training and follows safety and security policies, procedures and practices

• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept

• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly

• Actively strives to prevent accidents and injuries

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components

• Enters data on computer terminal, such as progress, work expense and labor details

• May perform computer programming, repair or software

• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities

• Has good understanding of how the team integrates with others

• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods

• Good communication skills to exchange of information

• Able to commit Mon-Fri (4pm - 1.30am shift). Transport provided.

Work Location

• Upper Changi

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

Key Responsibilities

• Responsible for all technical support related aspects at a specific customer: escalations, fleet performance, system installations, improvement programs and upgrades.

• Acts as intermediary and field escalation focal point between customer and Division by providing technical support and documentation to field engineers, technicians and product support personnel who are diagnosing, troubleshooting, repairing and debugging equipment.

• Provides Alpha Site support to Engineering specifically related to installation, operation, calibration, service and /or testing of a new hardware, process or software design in house or on an engineering tool

• Provides Beta Site Support; specifically related to installation, operation, calibration, service and/or testing of a new hardware, software or processes on a customer tool.

• Initiates and provides review of ECO's to ensure data supports fix and follow up with communication to the field.

• Generates and presents system performance data as required. This includes performance metrics such as MTBF, MTBI and Availability. Reporting will also include process data and I/W spending analysis.

• Supports GPS in the generation of documentation such as CENs and BKMs. Creates and reviews documentation covering technical improvements, system upgrades, and support plans. Presents at customer level. Ensures field implementation.

Qualifications

• 7 - 10 years of hands-on experiences on both wet clean and plasma/ RF/ vacuum chamber systems

• Knowledge on hybrid bonding process

• 20-30% of international and domestic travel

• An individual who is self motivated and work under minimum supervision

• Good communication and soft skills

Work Location

• Science Park II

Key Responsibilities

• Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.

• Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test

• Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed

• Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)

• Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required

• Collect process and qualification data to create product Best Known Methods (BKMs)

• Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping

• Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations