דרושים Facilities Maintenance Technician ב-Tesla ב-United States, Buffalo

• Troubleshoot equipment/process faults on the module line and help recover, report, and escalate when needed
• Support Engineers in adhoc or planned downtime activities including clear understanding of electrical/mechanical equipment, PLC, troubleshooting, and operation of equipment
• Help create/modify equipment troubleshooting guides and train operation teams when applicable
• Support Engineers in submitting and managing orders including vendor communication, obtaining quotes, on and offsite logistics, PO creation, and asset management
• Audit spares and add/remove items, change minimum quantities, for all equipment in the line

• Degree in Mechnical Engineering, Physics, Electrical Engineering or equivalent experience
• 2+ years of experience in an engineering development environment
• Great engineering drawing skills (CAD)
• Experience with test equipment as well as strong troubleshooting skills
• Ability to command the english language both written and verbal
• Safety oriented – must be able to identify energy sources in order to disable and verify safe through LOTO or other means. Must understand all site hazards and mitigate risk
• Strong interpersonal and communications skills as well as a positive attitude, eagerness to learn, ability to change direction quickly
• Basic level understanding of PLC and ignition preferred

• Develop and support manufacturing processes from concept through serial production
• Conduct trials, testing, and report results to Engineering
• Assist with factory layout and simulation, including line balancing, capacity modeling, automation, and yield studies
• Support product launches, process validation, and qualification activities
• Oversee installation and commissioning of new lines, ensuring process performance through statistical tools (e.g., GR&R, SPC)
• Coordinate with cross-functional teams, including engineering, project management, and manufacturing reps

• 3+ years related experience in a high-volume manufacturing environment, where automated techniques are utilized in the finishing of consumer products
• Experience working with/developing functional/aesthetic finishing processes (e.g. paint, thermal spray, plating and other metal coatings, etc.)
• Experience in developing, executing and interpreting results of Design of Experiments (DOE)
• New Product Introduction and Manufacturing Operations experience
• Experience using SolidWorks and/or AutoCAD
• Well organized with meticulous attention to detail

• Primary responsibility is to keep manufacturing lines running
• Install, support, upgrade, replace, and remediate all IT hardware along manufacturing lines
• Quickly respond to requests and incidents from our customers
• Troubleshoot Hardware, Operating System and software issues
• Troubleshoot Network issues from the client up to the switch and IDF
• Interface with the various manufacturing groups to understand issues
• Interpret how to solve long term needs within the framework of IT MFG and FSS standards

• Minimum of 5 years’ experience within a desktop support or system admin role
• Experience troubleshooting hardware issues and replacing hardware on Windows and Linux machines
• Experience troubleshooting printings, barcode scanners, ip cameras, digital signage
• Experience troubleshooting basic client-side network (DHCP, DNS, Static IP) problems
• Experience working with PLC, Ignition is a plus
• Knowledge of SQL queries and Splunk queries is a plus
• Linux support experience a plus
• Must be available for swing shift, weekends, and on-call support
• Network hardware support experience a plus
• Strong knowledge of Windows OS and Microsoft enterprise environments

• Work closely with manufacturing to establish processes and procedures to ensure consistently high quality and analyze and interpret data independently to anticipate potential problems and take preventative action
• Utilize product quality plans and control plans, maintain quality performance metrics, and drive issues to root cause solutions
• Work with Manufacturing Engineering to have a process that meets the product specification and tolerance and audit the manufacturing line against released manufacturing processes and procedures and process and implement Engineering Change Orders (ECOs) as required
• Assist in the identification and resolution of incoming material and manufacturing quality issues, contain parts or products as needed, sort parts for quality requirements, and analyze and disposition component and product defects as a member of the Material Review Board
• Participate in continuous improvement activities with manufacturing and take part in an ongoing optimization of the products concerning both cost and production technology
• Work with Supply Quality Engineering and Suppliers to maintain adherence to specifications that support production requirements
• Support FMEA activities to identify design and manufacturing issues and mitigate risks. Provide Design for Manufacturability feedback to Engineering, as well as participate in DFM reviews

• 3+ years of experience within quality systems in a high-volume manufacturing environment
• Experienced in QS-9000, ISO/TS 16949, APQP, PPAP, FMEA, DFMEA, PFMEA preferred
• Strong aptitude with electronic and manual test and measurement systems
• Proficiency in reading and interpreting mechanical drawings and wiring diagrams
• Ability to work in a dynamic, fast-paced environment, ability to lift and sort parts of up to 30 pounds as needed
• Ability to use technological tools and business system applications to manage, synthesize, and interpret data
• Knowledge of Lean Manufacturing practices, 5S, TPS, TQM, etc. are highly desired

Essential Physical Demands:

• Ability to perform physically demanding work for extended periods of time, up to 12 hours/day
• Frequently and repetitively, lift, push and carry up to 35 lbs.
• The ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes
• Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time, quickly and accurately during new hire training and maintaining ability throughout employment
• Exposures to hazardous materials used in the painting process and ability to follow waste handling/disposal procedures
• Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, bump caps, hearing protection, full-face respirators, gloves, and adhering to prescribed safety rules and guidelines

• Perform complex and precise electro-mechanical debug/repair/remanufacture
  
• Maintain inventory integrity and repair history through diligent record keeping and adherence to process
  
• Typically involves a variety of operations that require a thorough understanding of the functional operation of the subassemblies as well as the finished product
  
• Work from complex and detailed manufacturing documentation and/or verbal and written instructions
  
• Work with and help develop specialized fixtures, test equipment, and procedures
  
• Work with Material Review Board (MRB) to support Manufacturing
  

• Minimum 5 years experience in assembly and repair of electro-mechanical components or electric motors
  
• Working knowledge of high voltage DC battery systems, or basic electronics and DC electrical systems
  
• Proficient with hand tools and computer-based tools, including precision measuring equipment, electrical test equipment, and computer databases
  
• Experience with semi-automated manufacturing equipment is highly desirable. Ability to read and understand manufacturing instructions, electrical diagrams, and mechanical drawings
  
• Good command of the English language, both written and verbal
  
• Proficient with computer tools, including Word, Excel, QuickBase, and Outlook
  

• Disposition of all non-conforming materials that are produced by the manufacturing line
  
• Day to day coverage of production line process, including rapid response on out-of-control processes to minimize cost and maximize productivity
  
• Investigate and implement countermeasures to improve process Cpk and product yield
  
• Maintain and help develop up-to-date manufacturing instructions
  
• Support Lean Manufacturing and 5S initiatives
  
• Work with Engineering and Manufacturing to ensure maintenance instructions and schedules are always available and current as well as summarize and analyze yield and process data
  
• Manage small projects involving multiple departments and/or outside contractors as well as manage workload with positive attitude and proactively help co-workers
  

• Day to day sustaining MES/MI synchronicity
  
• Support and monitor engineering trials
  
• Weekend coverage of any process-related issues that may occur
  
• Managing MN creation/expiry/approvals
  
• Provide direct support to process engineers on continuous improvement projects
  
• Other duties as assigned by Manager
  
• Ability to command the english language both written and verbal
  

• Display a positive attitude and practice strong work ethic that reflects the mission, philosophy and goals of Tesla
  
• Participate in or lead various Fabrication Team projects based on experience and skills as well as lead station/tool install/build projects for maintenance and engineering teams
  
• Provide comments/improvements to designs based on experience and field conditions
  
• Troubleshoot root cause of tool errors and substandard performance in a cost-effective manner. This includes but not limited to: PLC troubleshooting, electro-mechanical systems, components, electronic sensors and switches
  
• Respond quickly to resolve unanticipated equipment problems
  
• Work with Production and Manufacturing Engineering team to optimize tool performance and related continuous improvement activities
  
• Interface effectively with vendors and their field service engineers onsite or via telephone support as well as attend scheduled corporate training and meetings
  

• Experience with interpreting schematics, panel building, circuit wiring, troubleshooting, and repairing electro-mechanical systems and components, hydraulic and pneumatic components, vacuum systems, vision systems, AC motor controls and PLC troubleshooting
  
• Expierence in electrical control panel building and/or electrical field wiring or machine building electrician
  
• Ability to travel for, at a minimum, one week at a time, several times per year
  
• Demonstrated safe work practices, able to lift up to 60 lbs.
  
• Ability to command the english language both written and verbal