דרושים Fire Ems Technician ב-Tesla ב-United States, Austin

• Collaborate with operations, construction, QA, and facilities engineering teams on commissioning activities and resolving electrical issues
• Provide technical guidance, lessons learned, and feedback on design and construction, focusing on modeling, utility routing, and commissioning checklist updates
• Oversee commissioning and start-up of all electrical systems, from medium to low voltage, ensuring readiness for facility ownership
• Work closely with third-party OEM equipment representatives during commissioning to align on standards and process requirements
• Participate in system handover walks, document and track open issues, and confirm resolution of all outstanding construction and commissioning tasks
• Review and accept turnover documentation, ensuring it meets design and operational requirements for seamless maintenance handover
• Interpret complex electrical schematics for planning conduit and cable scopes, troubleshooting VFDs, switchgear, and motors (120V–25kV), including work at height when necessary

• Minimum 5+ years of experience as an Industrial or Commercial Electrician; facility maintenance experience preferred
• Proficient in using trade tools, meters, and relevant technology to perform tasks effectively
• Skilled in sizing conductors and conduits, with strong knowledge of the NEC Code Book
• Experience with 24VDC to 25kV AC systems; expertise in troubleshooting motor controls, drives, and electronic components
• Ability to interpret electrical prints, schematics, and perform equipment installation and circuit modifications
• Strong interpersonal skills with the ability to engage all management levels, work independently, and collaborate effectively
• Comprehensive understanding of LOTO and NFPA 70E safety requirements

Essential Physcial Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Wearing Personal Protective Equipment, including but not limited to: hard hat, safety glasses, safety shoes, reflective vest, and adhering to prescribed safety rules and guidelines

• Respond to emergencies consistent with fire suppression for a 2,500-acre campus, over 11 million sqft of manufacturing space, a cathode facility, crash test area, wildland space, and growing
• Respond to confined space, trench, rescue, high-angle rescue, and entrapments. Respond to hazardous material incidents to contain and mitigate life and environmental hazards
• Provide basic/advanced life support during medical emergencies associate with trauma, chemical exposure, or medical emergencies
• Collaborate with On Site Medical (OSM) team to ensure the best possible patient care and outcome. Support stakeholders with emergency action plans, emergency drills, and emergency communication
• Provides detailed verbal, written, and computer reports pertaining to condition and care of patients. Organize, file, and maintain safety documentation (e.g., one note records, pass down logs,); Ensure all support documentation is collected for event reports.
• Maintain a strong presence throughout the site engaging with shop stakeholders and production associates while fostering a robust safety culture. Support EHS Specialists with safety concerns and assist with coordination of safety supplies (first aid kits, eyewash stations, etc.)
• Safely and efficiently operates emergency response and powered industrial vehicles. Perform confined space inventory, classification, and incident pre-planning. Support facility operations to minimize loss of production time

• Required - Firefighter 1 and 2 (IFSAC/Pro Board or TCFP), current National Registry Paramedic or TDSHS Paramedic, HazMat Awareness/Operations (HazMat Technician Preferred), FEMA ICS 100, 200, 700, 800 Certifications
• Valid driver's license required to be able to operate assigned fleet
• Rope Rescue/Confined Space Rescue Certifications Preferred
• Fire Instructor 1 Preferred, OSHA 10 Certification - Completion required within 6 months of hire
• Ability to rapidly respond to employee health emergencies, discern audible alarms and activate emergency procedures
• Display Excellence, Courage, Compassion, and Collaboration in accordance with the Fire & EMS Team values. Well organized, excellent attention to details and a passion the care of others
• Evidence of exceptional ability: Clear communication, teamwork, problem solving skills, and ability to adapt quickly

• Must be comfortable in confined spaces
• Must be able to lift over 50lbs
• Must be able to stand/walk for +10hrs daily
• Must be comfortable working with hazardous chemicals
• Must be able to pass respiratory requirements and operate in a SCBA mask for extended periods of time Must complete medical baseline assessment and have the ability to complete physically strenuous tasks associated with fire suppression, for extended periods of time

• Routine and preventative maintenance on industrial mobile equipment including forklifts, scissor lifts, tuggers
• Diagnose and perform repairs on industrial mobile equipment to minimize downtime
• Diagnosing and performing repairs of gas, LP, and diesel operated equipment
• Diagnose and repair electric forklift, tuggers, electric pallet jacks, and flatbeds
• Perform safety inspections on mobile equipment
• Turn wrenches, screw drivers and other hand tools and power tools

• High level of safety consciousness
• Minimum 5 years of maintenance experience with the following equipment preferred
• Having a working knowledge of hydraulics electrical fuel systems and/or charging systems
• Welding and Metal Fabrication/machine shop experience
• Computer literacy and ability to move through troubleshooting software

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Wearing Personal Protective Equipment, including but not limited to: hard hat, safety glasses, safety shoes, reflective vest, and adhering to prescribed safety rules and guidelines

• Installation: Install and configure fire alarm systems and components within the facility, ensuring they meet all safety and regulatory requirements
• Perform routine inspections and maintenance of fire alarm systems, sprinklers, and special hazards equipment to ensure systems are operational and compliant
• Diagnose issues and repair faulty fire alarm systems, sprinklers, or special hazard systems. Replace or repair components such as detectors, control panels, wiring, and other system parts
• Provide recommendations and assist in upgrading fire alarm, sprinkler, and special hazards systems to meet evolving safety needs
• Accurately complete service reports, inspection forms, and maintenance logs, ensuring compliance with company policies and regulatory requirements
• Ensure all fire protection systems, including alarms, sprinklers, and special hazards, meet local, state, and national fire safety codes
• Offer high-quality service to internal stakeholders and facility management teams, providing explanations of system performance and addressing concerns

• 2 years of experience in fire alarm systems and fire protection maintenance
• Fire Alarm Technician certification or equivalent, the ability to obtain certification within a set timeframe
• Proficient in fire alarm system installation, maintenance, and troubleshooting, as well as knowledge of fire sprinkler systems and special hazard equipment
• Familiarity with NFPA codes, local fire codes, and safety standards related to fire alarm, sprinkler, and special hazard systems
• Strong verbal and written communication skills to interact with team members, stakeholders, and regulatory agencies

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Wearing Personal Protective Equipment, including but not limited to: hard hat, safety glasses, safety shoes, reflective vest, and adhering to prescribed safety rules and guidelines

• Conduct comprehensive preventative maintenance on industrial production equipment, including advanced mechatronics and automation systems
• Troubleshoot and repair complex electrical systems ranging from 24 VDC to 480 VAC, 3-phase, ensuring precise fault detection and resolution
• Perform in-depth corrective maintenance on pneumatic, hydraulic and mechanical systems, including diagnostics, component replacement, and system calibration
• Diagnose and resolve issues in PLC-controlled systems and robotics, utilizing schematics
• and programming knowledge for effective repairs
• Operate and maintain all cells on the production line, addressing issues in conveyor systems and optimizing performance

• 5+ years of experience in maintenance for manufacturing equipment, with a strong background in electrical systems, Robotics, CNCs, PLCs, pneumatics and hydraulics
• Advanced skills in troubleshooting and repairing electrical systems and PLCs, with a thorough understanding of circuit schematics and fault analysis
• Proficient in hydraulic and pneumatic system diagnostics, including the use of advanced diagnostic tools and techniques
• Expertise in mechanical systems and conveyor maintenance, with the ability to address complex mechanical failures and optimize system efficiency
• Skilled in interpreting and utilizing technical drawings and schematics for maintenance and repair tasks
• Strong problem-solving capabilities with a focus on implementing effective, long-term solutions for equipment reliability
• Must have command of the English language, both written and verbal

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Wearing Personal Protective Equipment, including but not limited to: safety glasses, safety shoes, bump caps, arm protection, and adhering to prescribed safety rules and guidelines

• Perform Preventive Maintenance (PM) on mechatronics equipment
• Repair and program electrical systems 24 VDC to 480 VAC 3-phase, PLCs, and networks
• Operate and repair all cells on a production line
• Order parts and supplies as needed and log all work performed
• Read and interpret mechanical assembly drawings and troubleshoot using schematics
• Address equipment breakdowns and minimize downtime
• Execute additional tasks as directed by management

• Minimum 5 years of experience as a controls technician or engineer in manufacturing
• Strong electrical knowledge and proficiency with volt meters for AC/DC voltage checks
• Ability to read mechanical assembly drawings and perform precise measurements
• Advanced computer skills and experience with job-specific applications
• Proficient in pneumatics, hydraulic systems, and control operations
• Problem-solving skills with a focus on root cause analysis and long-term solutions

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively lift, push, and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively bend, lift, and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist, and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding, or other high structures
• Ability to identify issues in a work process and receive safety signals using sight, touch, and hearing
• Potential exposure to confined spaces, elevated heat, and hazardous materials
• Wear Personal Protective Equipment, including but not limited to: safety glasses, safety shoes, bump caps, arm protection, hearing protection, and adhere to prescribed safety rules and guidelines

• Lead and manage a team of fire protection engineers, fire suppression system designers, and fire alarm designers
• Collaborate with CSA and MEP disciplines, including electrical, mechanical, and plumbing teams, to design and integrate fire protection systems
• Work closely with construction teams to provide technical guidance and resolve any on-site fire protection system issues
• Ensure that all fire protection systems meet local, state, and national fire codes and standards
• Serve as the primary point of contact for authorities having jurisdiction (AHJs), ensuring project compliance with applicable regulations
• Conduct design reviews, risk assessments, and code compliance checks for fire protection systems
• Manage and oversee the preparation of fire protection system design documents, calculations, specifications, hydraulic calculations and construction documents
• Mentor and develop team members by providing leadership, training, and career development opportunities
• Prepare and manage project budgets, schedules, and resources for fire protection engineering projects

• Degree in Fire Protection Engineering or equivalent experience
• Professional Engineering (PE) licensure in Fire Protection Engineering in the state of Texas
• Minimum of 10 years of experience in fire protection engineering in large industrial, manufacturing, data center, or large commercial environments
• In-depth knowledge of fire protection codes, standards, and regulations, including NFPA, ICC, local fire codes, related building codes and standards
• Experience in a leadership or supervisory role
• Experience in the design, installation, and commissioning of fire suppression and fire alarm systems
• Ability to troubleshoot complex fire protection system issues and provide innovative solutions
• Proficiency in fire protection design software (e.g., AutoCAD, Revit, HydraCAD, etc.) and Microsoft Office Suite
• Preferred experience with dry fire suppression systems and experience using Revit software