דרושים Machining Supervisor Die Shop ב-Tesla ב-United States, Austin

• Develop and implement a comprehensive Quality Management System (QMS) aligned with industry standards (e.g., ISO 9001)
• Define quality processes and procedures across all stages of die design, machining, assembly, and final inspection
• Collaborate with design, machining, and project teams to ensure build quality, adherence to specs, and functional performance
• Conduct root cause analysis and implement corrective and preventive actions (CAPA) for quality issues and non-conformances
• Establish and monitor quality KPIs, including scrap rates, rework, dimensional accuracy, and customer feedback
• Lead first-piece inspections, in-process checks, and final quality audits
• Utilize tools such as CMMs, GD&T, SPC, FMEAs, and control plans to ensure quality standards are met
• Work closely with customers and suppliers to resolve quality concerns and implement improvements
• Facilitate training for shop floor personnel on quality standards, procedures, and continuous improvement practices
• Drive a culture of quality and accountability throughout the organization

• Degree in Mechanical Engineering, Manufacturing, or equivalent experience
• Minimum 3+ years of experience in a quality engineering role, preferably in tooling, die manufacturing, or metal casting environments
• Strong understanding of HPDC tooling, machining, and inspection methods
• Hands-on experience building or maintaining a QMS (ISO 9001 experience preferred)
• Proficient in GD&T, SPC, root cause analysis (5 Whys, Fishbone), and other quality tools
• Comfortable working on the shop floor and collaborating with cross-functional teams and die casting industry standards/tolerances
• Strong analytical, organizational, and communication skills
• Proficiency with measurement tools and inspection equipment (CMMs, height gauges, micrometers, etc.)
• Experience with lean manufacturing or Six Sigma methodologies
• Background in metrology or dimensional inspection

As a Production Supervisor you will have the critical task of managing the priorities, equipment, and people associated with the production line. Your experience in fast-paced production lines where process and equipment development are key features will make you an ideal candidate for this role. You have a passion for employee development and enjoy the process of training and developing both new hires and veteran production staff. You are very hands-on and prefer to be on the production floor and have proven skills in both process and equipment troubleshooting, allowing you to easily adapt to constantly changing production environments.

• Execute on priorities and production plans provided by operations management
  
• Manage, coach, mentor and support up to 35 production associates on shift
  
• Execute and maintain Standardized Manufacturing instructions and Control plans
  
• Support issue resolution including root cause investigation & corrective action tracking
  
• Ensure quality standards are being met throughout the entire production process and support no defects from leaving a station or team area
  
• Generate daily pass downs and quality reports for engineering and operations team
  
• Tesla people leaders are responsible for a variety of Environmental Health and Safety (EHS) assurance functions, including ensuring their teams’ safety training is current, documenting EHS incidents, correcting proactively workplace hazards in the areas, and empowering others to continuously improve operations
  

• Degree preferred or relevant experience
• 3+ years managing or supervising teams of people in a high-volume production environment
  
• Experience in powder handling, mixing, roll winding and conveyance is preferred
• Experience supporting process development and equipment maintenance
• Knowledge of 5S, lean manufacturing or 6-Sigma principles
  
• Must have command of the English language, both written and verbal
  
• Proficient with MS office programs (Word, Excel, PowerPoint, and Project)
  

• Execute on priorities & production plans provided by operations management & production engineers
• Lead a team of operators in the safe & efficient operation of the Cathode Plant, ensuring compliance with all safety, environmental, & regulatory requirements
• Manage direct report's performance, vacation requests, time off requests & ensure appropriate shift coverage
• Identify & troubleshoot equipment & process issues to minimize downtime & improve productivity
• Develop & maintain standard operating procedures (SOPs) for production operations
• Train & mentor operators on safe and effective operating practices
• Participate in incident investigations & root cause analyses as required

• Minimum of 5 years of experience in a supervisory role in a chemical or refinery operation
• Strong leadership skills & the ability to lead a team in a fast-paced and dynamic environment
• Strong communication and interpersonal skills
• Knowledge of process control systems, process safety management & environmental regulations
• Willingness to work rotating shifts, including nights and weekends, as required
• Proficient with MS office programs (Word, Excel, PowerPoint, and Project)
• Must have command of the English language, both written and verbal

• Perform preventative maintenance, repairs, and tooling changes for can stamping, can forming, and other production die-sets
• Support the design and implementation of tooling changes to accommodate part modifications
• Maintain and manage die-set preventative maintenance (PM) system, including scheduling and updating work instructions
• Troubleshoot defects and support the preparation of die check sheets and trial procedures
• Maintain die-set spare parts lists, ensuring parts are stocked and readily available
• Develop and implement systems to reduce defects, improve productivity, and minimize downtime
• Collaborate on Failure Modes and Effects Analysis (FMEA) to identify risks and create control plans for production dies

• 5+ years of hands-on experience with stamping, forming, and die-set maintenance and repair. Apprenticeship certification in Tool & Die or equivalent experience
• Experience with high-speed die-sets, including tooling material selection, and knowledge of CNC die surface machining, welding, and spotting
• Familiarity with Lean principles (waste elimination, continuous improvement, JIT, etc.)
• Ability to interpret dimensional inspection results (CMM, checking fixture, or vision systems)
• Proficiency in MS Office (Word, Excel, PowerPoint, Project) and strong analytical skills
• Ability to work independently and in a team, managing tight deadlines and competing priorities
• Must have command of the English language, both written and verbal

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Wearing Personal Protective Equipment, including but not limited to: safety glasses, safety shoes, bump cap, and adhering to prescribed safety rules and guidelines

• Maintain die-set PM system, including detailed work instructions and manage on schedule completion of PM activities
• Support defect troubleshooting procedures and die preparation check sheets and trial procedures
• Maintain die-set spare parts lists and ensure parts are set up and in stock
• Follow die cleaning method and adherence to schedule
• Identify and implement proactive systems to achieve consistent reduction in defects and productivity concerns
• Support development of Failure Modes and Effects Analysis (FMEA) for production dies to identify critical risks and develop appropriate control plans
• Troubleshoot in press line and minimize die-set down times during production

• 5+ years progressively responsible hands-on experience working in stamping and forming die-set maintenance and repair
• Experience in operations, maintenance, and rework procedures for high-speed die-sets producing aluminum or steel cylinders, including tooling material selection
• Understanding and background working on lean projects (waste elimination, continuous improvement tools, JIT, flow, poka-yoke, etc.)
• Experience with interpretation of dimensional inspection results (checking fixture, CMM or vision system)
• Ability to work with and develop production performance metrics with engineers and management (efficiency, quality, safety, throughput, costs). Remain engaged, proactive, and positive in tough circumstances, owning assignments and taking full accountability for success
• Demonstrated ability to support, promote, and improve a safety-focused environment
• Command of the English language, both verbal and written

Essential physical demands:

• Stand for long periods, lift up to 50 pounds, and work in a fast-paced, noisy environment
• Wear personal protective equipment (PPE) and work in varying temperatures and environments
• Ability to climb, bend, stoop, and kneel as needed

As a Tool & Die Specialist, you will support die-set maintenance and tooling changes for production in the High Pressure Die Casting department. The ideal candidates will possess excellent craftsmanship, the ability to troubleshoot, and a commitment to safety and production goals.

• Perform preventative maintenance, repairs, and tooling changes for production die-sets

• Support the design and implementation of tooling changes to accommodate part modifications

• Maintain and manage die-set preventative maintenance (PM) system, including scheduling and updating work instructions

• Troubleshoot defects and support the preparation of die check sheets and trial procedures

• Maintain die-set spare parts lists, ensuring parts are stocked and readily available

• Develop and implement systems to reduce defects, improve productivity, and minimize downtime

• Collaborate on Failure Modes and Effects Analysis (FMEA) to identify risks and create control plans for production dies

• 3+ years of hands-on experience producing structural aluminum die castings. Apprenticeship certification in Tool & Die or equivalent experience

• Experience with high-speed die-sets, including tooling material selection, and knowledge of CNC die surface machining, welding, and spotting

• Familiarity with Lean manufacturing principles (waste elimination, continuous improvement, Just-in-Time, etc.)

• Ability to interpret dimensional inspection results (CMM, checking fixture, or vision systems)

• Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project) and strong analytical skills

• Ability to work independently and in a team, managing tight deadlines and competing priorities

• Must have command of the English language, both written and verbal

Essential Physical Demands

• Ability to perform physically demanding work for extended periods of time, up to 12 hours a day
• Ability to stand and walk for up to 12 hours a day, including over varied and uneven terrain
• Frequently and repetitively, lift, push and carry up to 35 lbs., including the ability to carry 20 lbs. up and down stairs
• Frequently and repetitively, bend, lift and reach to install parts
• Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours a day
• Climb and maintain balance on ladders, scaffolding or other high structures
• Ability to find issues in a work process and receive safety signals using sight, touch, and hearing
• Potential exposure to confined spaces, elevated heat and hazardous materials
• Wearing Personal Protective Equipment, including but not limited to: safety glasses, safety shoes, hard hat, arm protection, hearing protection and adhering to prescribed safety rules and guidelines

• Operate Vacuum Heat Treat, Stress Relief, and Gas Nitriding furnaces
• Maintain production plan and output flow thru the Die shop furnaces
• Diagnos equipment failures, collect data to identify root causes and develop sustainable solutions
• Working with management and engineering, follow the production schedule, using established processes and procedures
• Maintain a safe and clean work environment

• 5+ years’ experience operating Heat Treat Furnaces working with Tool Steels
• 3 years minimum working with Nitriding Furnaces
• Experience working to a production schedule responsible for furnace output
• Outstanding root causing and problem-solving skills
• Experience creating & maintaining a positive atmosphere in a collaborative work team
• Experience training new operators
• Detail oriented with excellent record keeping and organizational skills