דרושים Lead Engineering Technician ב-Honeywell ב-ארהב

THE POSITION

Thehereat Honeywell, you will hold a senior leadership position and will beresponsible for leading the strategy for concurrent engineering,AME, maintenance, Accelerator, AI/OI and NPI across global ISC.

You will report directly to our BA Integrated Supply Chain Vice President.
KEY RESPONSIBILITIES

• Concurrence Engineering: Close the loops and gaps between NPI, ECNs and production products, driving actions and solutions among design engineering, AME, Quality, Sourcing, Planning, and production.
• AME: First pass yield program improvement, Manufacturing process improvement (group of technical experts), Digitalization tools implementation, Capex, budget and execution, automatization, manufacturing resiliency.
• NPI: Standardize the NPI process across all GBE/Regions with cross-functional alignment to ensure flawless transition execution. Enable inventory and bias control by leveraging Rapid Response capabilities
• Sourcing: Develop a standard end-to-end NPI procurement process with clear requirements for each development phase, aligned with the HON Global Development Model. Create a digital dashboard to track projects and compliance with key sourcing metrics. This role will lead the strategy for insourcing assessments, especially as it pertains to SAS contract mfg. post integration. The leader will be responsible for setting up new strategies to define core competencies on what is hard to source and defining the manufacturing strategy.
• Planning: Deploy and leverage the ‘NPI Metrics Scorecard’ to drive NPI production readiness. Integrate NPI metrics targets in Discovery and Development phase exits. Use digital tools to collect objective data on product readiness (FPY, cycle times, etc.).
• Quality: Standardize the NPI Quality process across GBE/Regions/site/RT in each NPI phase. Ensure cross-functional alignment on roles and responsibilities for a flawless product launch.
• Preventative Maintenance (PM): Standardize the TPM process globally, establish the appropriate maintenances process, procedures, and retinues to optimize uptimes and cost. As BA increases automation, the introduction of a PM program is critical to protect our investments and maintain our up-time metric expectations.
• Accelerator: This role will lead the Accelerator subfunction and focus on global alignment to the GDM, regional execution of Kaizen productivity, Poka Yoke campaigns, Sprint Deployments and revamping the Six Sigma and Lean Expert training.
• AI/OI: develop the platform and standard process for AI/OI for met analysis and recommendations by plant GBE, region and global.

YOU MUST HAVE

• Bachelor's degree in engineering or related technical skills.
• Minimum 10 years of leadership experience in supply chain, engineering or manufacturing with increasing responsibility in a complex, global environment is required.
• Proven track record of leading change in a complex, matrix organization.
• Strong team leadership and talent development.
• Experience leading application of AME in NPI process.
• Operational Excellence experience.
• Strong Leadership and influencing skillset.
• Lean expert and/ Black belt is highly desired.

WE VALUE

• Multi-function ISC experience, including experience with HSE, process safety management, quality, manufacturing, project and process engineering, procurement, delivery, inventory, supply chain planning, logistics, and manufacturing transitions.
• Proven track record of approaching business challenges from a macro perspective and resolving strategic issues effectively.
• Ability to manage multiple, complex projects and changing priorities; make sound decisions under pressure, and work effectively in a team environment.
• A strong bias for action with a results orientation.
• Capability to work on multiple projects and effectively manage priorities.
• Transformative mindset.
• Strong analytical and data driven to make decisions.
• Strong communication and influence skills.
• Experience in successful implementation/application of robotics and artificial intelligence within electronic product manufacturing.

• JOB ID: req482963
• Category: Integrated Supply Chain
• Location: 715 Peachtree Street, N.E.,Atlanta,Georgia,30308,United States
• Exempt

• JOB ID: 1662
• Remote Eligibility: On-Site
• Travel Required: 0-10%
• Hourly/Salary: Salary
• Relocation Available: Yes

• This position is intended to convey to the new, independent company, to be named Solstice Advanced Materials when the separation occurs. This is expected to occur in late 2025 or early 2026.
• At Advanced Materials, we are committed to offering the highest value-add specialty solutions in the advanced materials sector. Our goal is to solve our customers' most complex challenges through a robust and innovative product portfolio and by doing so, deliver exceptional value to our stakeholders. We have identified actionable strategies to grow by expanding into new products and markets and through strategic acquisitions, while keeping our top operating margins.

As a Lead R&D Engineer/Scientist, you will be accountable for providing guidance, mentorship, and technical expertise to guide critical project groups. You will utilize your background in areas such as materials science, electronics, sensors, controls, or related fields to guide and contribute to the development of innovative solutions.

In this role, you will impact the development of innovative solutions, identifying opportunities for process improvement and implementing best practices to enhance the efficiency of R&D activities. Your contributions will play a pivotal role in driving technological advancements, shaping the future of the company, and contributing to Advance Material's dedication to addressing global demand through innovative solutions.

KEY RESPONSIBILITIES

• Provide guidance, mentorship, and technical expertise to guide critical project groups
• Contribute to the development of innovative solutions
• Identify opportunities for process improvement and implement best practices
• Drive technological advancements and shape the future of the company
• Contribute to Honeywell's dedication to addressing global demand through innovative solutions

• 6+ years of experience performing research and development projects within a technology or manufacturing environment
• Strong background in areas such as materials science, electronics, sensors, controls, or related fields
• Proven track record of technical guidance and project management

• Bachelor's degree or advanced degree in Chemistry, Engineering, Physics, or another related field
• Solid insight into software development best practices, design patterns, and architecture ethics
• Excellent thoughtful and problem-solving skills
• Demonstrated ability to drive technology commercialization is a plus
• Passion for innovation and continuous learning
• Attention to detail

• JOB ID: req485149
• Category: Engineering
• Location: Building 1, Lane 555, Huan Ke Road, Zhangjiang,Shanghai,SHANGHAI,201203,China
• Exempt

As a Tool & Die Technician - Level 1 here at Honeywell, you will play a crucial role in our manufacturing process by maintaining and repairing various types of tools and dies used in production. You will work closely with our engineering and production teams to ensure the efficient operation of our equipment and the timely completion of projects. This is an entry-level position that offers the opportunity to develop your skills and grow within our organization. You will report directly to our Tool & Die Manager and you'll work out of our Freeport, IL. In this role, you will impact our operations by: - Performing routine maintenance and repairs on tools and dies to ensure optimal performance - Troubleshooting and resolving issues with tooling and equipment to minimize downtime - Assisting in the design and fabrication of new tools and dies - Collaborating with cross-functional teams to improve production processes and efficiency - Following safety protocols and maintaining a clean and organized work area.

KEY RESPONSIBILITIES

• Perform routine maintenance and repairs on tools and dies

• Troubleshoot and resolve issues with tooling and equipment

• Assist in the design and fabrication of new tools and dies

• Collaborate with cross-functional teams to improve production processes

• Follow safety protocols and maintain a clean work area

The annual base salary range for this position is $53,900 ($25.91/hr) - $67,300 ($32.35/hr). Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations.

• High school diploma or equivalent

• Basic knowledge of tool and die maintenance and repair

• Strong mechanical aptitude

• Ability to read and interpret technical drawings and specifications

WE VALUE

• Technical certification or vocational training in tool and die making

• Experience in a manufacturing environment

• Knowledge of CNC machining and programming

• Strong problem-solving skills

• Attention to detail and accuracy

• JOB ID: req479317
• Category: Integrated Supply Chain
• Location: 315 E Stephenson St, Plant 1,Freeport,Illinois,61032-4353,United States
• Nonexempt
• Due to US export control laws, must be a US citizen, permanent resident or have protected status.

In this role, you will impact the efficiency and effectiveness of our programs and processes, ensuring compliance, identifying areas for improvement, and driving continuous improvement initiatives. The specialist will use strategic thinking to anticipate problems, recognize and eliminate barriers, and drive success. Your work will be instrumental in driving operational excellence and contributing to the success of our organization.

• Schedule and Milestone development/management
• Cost development/management
• Support efforts in planning, scheduling, and cost control for all phases of engineering projects
• Maintain & analyze project cost commitments & forecasts
• Anticipate schedule and cost deviations through trend analysis and earned value management (EVM)
• Develop and maintain appropriate project control metrics and reports
• Act as liaison between Finance and Project team
• Coordinate with design houses and construction contractors for project controls data
• Coordinate project activities between internal process design team, design houses, and contractors
• Use SAP and EcoSys tools to cost-estimate, plan and execute project(s)
• Use a standardized Change Orders process to reflect changes to the project plan
• Convey project controls data analysis to Project Manager and suggest possible alternatives to improve project metrics
• Regularly report project progress to managers and project steering teams
• Monitor and control projects to meet the stated objectives and metric commitments
• Responsible for forecasting and managing capital expenditures
• Responsible for collecting and reporting cost and schedule performance metrics on all projects assigned

• Bachelor’s degree from an accredited institution in a technical discipline such as the sciences, technology, engineering or mathematics.
• Minimum of 5 years of experience in project controls or related roles
• Strong analytical and problem-solving skills
• Attention to detail and ability to work with complex data
• Excellent communication and collaboration skills

• Bachelor's degree in Business, Engineering, or related field
• Significant experience in Primavera P6 strongly desired
• Individuals who are self-motivated and able to work with little supervision
• Ability to convey subtle or complex messages clearly, as appropriate for the topic and audience
• Demonstrated Earned Value Management skills
• Strong organizational and time management skills
• Understanding of business objectives and more importantly the ability to interact with our customers
• Work with functional leaders to prioritize resources and implement project objectives
• Ability to influence others to accept new concepts, practices, and approaches

• JOB ID: req487888
• Category: Business Management
• Location: 2101 CityWest Blvd,Houston,Texas,77042,United States
• Exempt

Achieves successful on-site installation, servicing and repair processes of complex equipment and systems without direct supervision. You will follow detailed work instructions and amend any outdated or incorrect instructions with help of Engineering teams. You will make improvements to training guides and documentation. You will achieve continuous improvement initiatives in the field to quickly fix any administrative difficulties relating to delivery and installation of proper equipment. You will train the customer on proper usage, troubleshooting, and basic repair procedures for complex equipment. You will represent Honeywell at industry conferences and provide technical presentations.

• Schedule will be 2nd shift, Mon-Thurs 5:00pm-3:30am, must be available during those times.
• Inspect for Quality
• Install or Repair Work Orders
• Provide Customer Support

• 1+ year of mechanical or industrial field installation experience
• Must be able to work 2nd shift, Mon-Thurs 5:00pm-3:30am

We Value

• Previous industry experiences working with PLC's, conveyor systems, high voltage electrical
• Previous technical/installation experience
• Previous customer service experience
• Good written and oral communication
• Ability to follow instructions and identify mistakes
• Bachelor degree or technical/professional certificate

• JOB ID: HRD264084
• Category: Customer Experience
• Location: 480 Park Center Dr,Winchester,Virginia,22603,United States
• Nonexempt

Achieves successful on-site installation, servicing andrepair processes of complex equipment and systems without direct supervision.You will follow detailed work instructions and amend any outdated or incorrectinstructions with help of Engineering teams. You will make improvements totraining guides and documentation. You will achieve continuous improvementinitiatives in the field to quickly fix any administrative difficultiesrelating to delivery and installation of proper equipment. You will train thecustomer on proper usage, troubleshooting, and basic repair procedures forcomplex equipment. You will represent Honeywell at industry conferences andprovide technical presentations.

Key Responsibilities

• Will be required to work alternating schedule- night shift 3 on 4 off then 4 on 3 off, will be off every other Saturday.
• Inspect for Quality
• Install or Repair Work Orders
• Provide Customer Support

YOU MUST HAVE

• High School Diploma, or equivalent
• 1+ year of mechanical or industrial field installation experience
• Must be able to work nights and weekends. Will do 3rd shift- 4 on and 3 off then 3 on and 4 off with every other Saturday off.

WE VALUE

• Previous industry experiences working with PLC's, conveyor systems, high voltage electrical
• Previous technical/installation experience
• Previous customer service experience
• Good written and oral communication
• Ability to follow instructions and identify mistakes
• Bachelor degree or technical/professional certificate

• JOB ID: HRD261773
• Category: Customer Experience
• Location: 6400 Jefferson Metro Pkwy,McCalla,Alabama,35111,United States
• Nonexempt