דרושים Assembler Ii ב-Applied Materials ב-United States, Kalispell

Key Responsibilities

1.With management supervision, develops, implements, and releases new product BOMs for moderately complex assemblies and product structure. Works with senior NPME to implement new product manufacturing, test, and sourcing strategies.

2.Develops and validates Operation Method Sheets (OMS) for moderately complex assemblies.

3.Partners with Sr NPMEs in 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals.

4.Partners with Sr NPME to log change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs).

5.Documents product-related issues/enhancement opportunities. Assists in determining root cause analysis..

6.Leads the Managed Build process for assemblies/modules.

7.Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to assemblies/modules.

8.May perform other duties as assigned.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Key Responsibilities

1.With management supervision, develops, implements, and releases new product BOMs for moderately complex assemblies and product structure. Works with senior NPME to implement new product manufacturing, test, and sourcing strategies.

2.Develops and validates Operation Method Sheets (OMS) for moderately complex assemblies.

3.Partners with Sr NPMEs in 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals.

4.Partners with Sr NPME to log change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs).

5.Documents product-related issues/enhancement opportunities. Assists in determining root cause analysis..

6.Leads the Managed Build process for assemblies/modules.

7.Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to assemblies/modules.

8.May perform other duties as assigned.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Key Responsibilities

Performs routine to moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.

May test and troubleshoot system level and component level problems in electrical and mechanical systems and sub-systems. May perform new system and NPI installations and field upgrades.

Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform routine testing and troubleshooting.

Compiles logbooks and test procedures documentation utilizing good writing skills.

May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems.

May perform rework as a result of testing. Generates Quality Notifications.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Performs a wide variety of routine and non-routine electro-mechanical assembly operations, troubleshooting and repair. Adjusts, aligns and/or performs "go-no go" tests using test fixtures or non-diagnostic electronic testing devices. Identifies and corrects errors. Retests. Validates design, fabrication and set up of assemblies.

Applies advanced skills to wire, assemble, test, troubleshoot, and calibrate moderately complex equipment and sub assemblies. Areas of expertise include electrical interconnect, mechanical, pneumatic, fluid flow, or vacuum technologies. Makes own set-ups, alignments and adjustments, maintaining tolerance according to instructions. Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required. Follows work orders, schematics, wiring diagrams, engineering specifications, sketches, assembly shop and production operations sheets, parts and wire lists, written and/or verbal instructions to construct electro-mechanical, vacuum and/or pneumatic assemblies, subassemblies and components.

Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training, and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety department. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Edits and provides feedback to moderately complex reports and/or manufacturing procedures.

Maintains cleanliness of work area and ensures proper handling of tools, equipment and stock to prevent loss or injury. Details finished work by removing fingerprints, etc. and then properly packages to prevent damage in transportation or storage.

Performs other duties and/or completes training as required by Supervisor.

NOTE: Duties for this and all Assembler levels are generically defined to describe job functions with similar skill levels. Area supervision has responsibility for defining and communicating those duties which apply to specific job functions within the classification.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed proficiency in a range of processes or procedures to carry out assigned tasks

Business Expertise

• Has a basic understanding of how the team integrates with others

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Key Responsibilities

Performs a variety of routine electro-mechanical assembly operations, troubleshooting and repair. Adjusts, aligns and/or performs "go-no go" tests using test fixtures or non-diagnostic electronic testing devices. Identifies and corrects errors. Retests.

Applies skills to wire, assemble, test, troubleshoot, and calibrate equipment and sub assemblies. Makes own set-ups, alignments and adjustments, maintaining tolerance according to instructions. Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required. Follows basic work orders, schematics, wiring diagrams, sketches, assembly shop and production operations sheets, parts and wire lists, written and/or verbal instructions to construct electro-mechanical, vacuum and/or pneumatic assemblies, subassemblies and components.

Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training, and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety department. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Records basic data and provides status updates. Utilizes standard hand tools and fixtures for precise locating and positioning of parts. Typical tasks include connecting components or assemblies into housings, panels or chassis. Mounts and adjusts switches, springs, clamps, shafts, interconnecting devices, terminals, wiring harness ends, gears, nobs, tubing, fitting belts, chains, timers, motors, pumps, etc. Cuts wire to specific sizes, strips tins or binds wire parts, connect component lead wires and wiring harness ends to specified terminal points. Identifies defective parts.

Maintains cleanliness of work area and ensures proper handling of tools, equipment and stock to prevent loss or injury. Details finished work by removing fingerprints, etc. and then properly packages to prevent damage in transportation or storage.

Performs other duties and/or completes training as required by Supervisor.

NOTE; Duties for this and all Assembler levels are generically defined to describe job functions with similar skill levels. Area supervision has responsibility for defining and communicating those duties which apply to specific job functions within this classification.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed skills to perform day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills for exchange of information