Production Associate – Lamination 1st Shift- - Pm M-f jobs at Ge Healthcare in United States, Phoenix

Key Responsibilities:

• 2nd Shift Position: 1:30pm-10:30pm, Mon-Fri
• Reads work procedures and schematics, and provides instruction to others when required
• Strive to be trained in as many operations within assigned area as possible.
• Audit that workstation is maintained according to 5S and that required tools are available and in good working order and escalate if additional action is required
• Monitoring the daily production flow and adjusting workload and resources appropriately in assigned area.
• Follow up on defects being reported and handed over to rework area according to defined routine. Escalate and report reoccurring defects in Tier 2.
• Respond to alerts from assigned area
• Making sure defined area has correct amount of material available at all time and supply when necessary.
• Assisting in implementation of process improvements to increase quality and productivity levels
• Monitoring and escalating QA/RA and EHS procedures and policies as required
• Ensuring manufacturing documentation used during the production process is of the correct and most current revision

Quality Specific Goals:

• Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position
• Complete all planned Quality & Compliance training within the defined deadlines
• Identify and report any quality or compliance concerns and take immediate corrective action as required
• Training: Aware of and comply with GEHC training requirements
• Knowledge and understanding of production process, work instructions, documentation configuration control, non-conforming & rework documentation requirements and operates within them to ensure that a device conforms to it’s specification.
• Aware of and comply with Stop Order, Concessions, ESD, Calibration, Preventative Maintenance, Material Identification & Segregation, and Good Documentation Practices, as associated with this job type/position

Required Qualifications:

• High School Diploma or local equivalent
• 5 or more years of related manufacturing experience
• Ability to communicate, receive and understand instructions regarding duties to be performed
• Ability to provide instructions regarding policies and procedures

• Preferred Qualifications:

• Associates degree or local equivalent
• Prior management experience
• Prior experience working in a medical device manufacturing environment
• Previous experience in GMP work environment
• Take lead in different projects and/or specific tasks as needed in addition to regular tasks described herewith.
• Other duties as assigned, and may be asked to be included in quality activities, training sessions, and employee activity teams
• Participates in quality control inspections when required
• Comply with EHS regulations and policies

**No Sponsorship or relocation for this role**

Duties/Responsibilities:

• Follows work procedures and schematics including complex instructions regarding

• duties to be performed.

• Performsmanufacturing/assemblyoperations and various tasks following procedures,

• bills of materials, work instructions, and process aid sheets.

• Demonstrated ability to perform all Production I responsibilities.

• Perform mid-levelmanufacturing/assembly/refurbishmentoperations

• Works independently and performs mid-level rework and testing's when required

• Maintains daily production output.

• Check/review final product paperwork

• Trained on all functions on the assigned line or cross trained in multiple areas

• Identify, report, and investigate defects.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Assist with the implementation of process improvements to increase

• quality/productivity and to reduce cycle time.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Performing more advanced and complex assembly and testing when required

• Trains other team members when required.

• Comply with EHS regulations and policies

Required Qualifications:

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and stressful environment.

• Direct day to day work in assigned area.

• Demonstrated ability to work at multiple workstations, to multitask, to be flexible in shifting task, and to be cross trained to do so

Education and Experience:

• High School Diploma/GED or local equivalent

• Minimum of 6 to 12 months of related manufacturing experience

• Shift: 3rd Shift; 10:00 pm-6:30 am Sunday night thru Friday morning.

• Lamination Team makes $1.50 extra/hr

Physical Requirements:

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 50 pounds.

• Follows work procedures and schematics including complex instructions regarding duties to be performed.

• Performs manufacturing/assembly operations and various tasks following procedures, bills of materials, work instructions, and process aid sheets.

• Demonstrated ability to perform all Production I responsibilities.

• Perform mid-level manufacturing/assembly/refurbishment operations.

• Works independently and performs mid-level rework and testing's when required.

• Maintains daily production output.

• Check/review final product paperwork.

• Trained on all functions on the assigned line or cross trained in multiple areas.

• Identify, report, and investigate defects.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Assist with the implementation of process improvements to increase quality/productivity and to reduce cycle time.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Performing more advanced and complex assembly and testing when required.

• Trains other team members when required.

• Comply with EHS regulations and policies.

• Is compliant to gowning procedures in a controlled environment.

• High School Diploma/GED or local equivalent.

• Minimum of 6 to 12 months of related manufacturing experience

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and manufacturing environment.

• Direct day to day work in assigned area.

• Demonstrated ability to work at multiple workstations, to multitask, to be flexible in shifting task, and to be cross trained to do so.

• This role supports the Lamination team, which pays $1.50 extra an hour.

• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.

• Demonstrated ability to handle small and delicate parts.

• Demonstrated ability to work with a microscope.

• Previous experience in a controlled environment.

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 35 pounds. (If over 35 lbs. requires assistance).

• Performs manufacturing/assembly operations and various tasks following procedures, bills of materials, work instructions, and process aid sheets.

• Maintains daily production output.

• Performs basic manufacturing/assembly/refurbishment operations.

• Complete basic troubleshooting.

• Ensure manufacturing documentation is correct/current.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Work with team to improve quality and reduce cycle time.

• Participate in 55S activities led by team lead/management.

• May assist with training peers when required.

Required Qualifications

• High School Diploma/GED or local equivalent.

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and stressful environment.

• Demonstrated ability to work at assigned workstation.

• Maintain daily production output.

• Perform Job with guidance.

• Receive verbal instructions on duties.

• Read/follow procedures/schematics for standard operations.

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 35 pounds (Anything over 35 pounds require assistance).

**No Sponsorship or relocation for this role**

Duties/Responsibilities:

• Follows work procedures and schematics including complex instructions regarding

• duties to be performed.

• Performsmanufacturing/assemblyoperations and various tasks following procedures,

• bills of materials, work instructions, and process aid sheets.

• Demonstrated ability to perform all Production I responsibilities.

• Perform mid-levelmanufacturing/assembly/refurbishmentoperations

• Works independently and performs mid-level rework and testing's when required

• Maintains daily production output.

• Check/review final product paperwork

• Trained on all functions on the assigned line or cross trained in multiple areas

• Identify, report, and investigate defects.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Assist with the implementation of process improvements to increase

• quality/productivity and to reduce cycle time.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Performing more advanced and complex assembly and testing when required

• Trains other team members when required.

• Comply with EHS regulations and policies

Required Qualifications:

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and stressful environment.

• Direct day to day work in assigned area.

• Demonstrated ability to work at multiple workstations, to multitask, to be flexible in shifting task, and to be cross trained to do so

Education and Experience:

• High School Diploma/GED or local equivalent

• Minimum of 6 to 12 months of related manufacturing experience

• Shift: 3rd Shift; 10:00 pm-6:30 am Sunday night thru Friday morning.

• Lamination Team makes $1.50 extra/hr

Physical Requirements:

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 50 pounds.

As a Production Support Specialist your responsibilities will include but are not limited to:

Duties/Responsibilities:

• Performs manufacturing/assembly operations and various tasks following procedures, bills of materials, work instructions, and process aid sheets.

• Maintains daily production output.

• Performs basic manufacturing/assembly/refurbishment operations.

• Complete basic troubleshooting

• Ensure manufacturing documentation is correct/current.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Work with team to improve quality and reduce cycle time.

• Participate in 55S activities led by team lead/management.

• May assist with training peers when required.

Required Skills/Abilities/Work Scope

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and stressful environment.

• Demonstrated ability to work at assigned workstation.

• Maintain daily production output.

• Perform Job with guidance.

• Receive verbal instructions on duties.

• Read/follow procedures/schematics for standard operations.

Education and Experience:

• High School Diploma/GED or local equivalent • 0 to 6 months of related manufacturing experience

Physical Requirements:

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 50 pounds.

As a Production Support Specialist your responsibilities will include but are not limited to:

Performs manufacturing/assembly operations and various tasks following procedures, bills of materials, work instructions, and process aid sheets.

• Maintains daily production output.

• Performs basic manufacturing/assembly/refurbishment operations.

• Complete basic troubleshooting

• Ensure manufacturing documentation is correct/current.

• Follows all EHS and Quality policies and procedures.

• Participates in quality control inspections when required.

• Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency.

• Other duties as assigned and may be asked to be included in quality activities, training sessions, and employee activity teams.

• Work with team to improve quality and reduce cycle time.

• Participate in 55S activities led by team lead/management.

• May assist with training peers when required.

Required Skills/Abilities/Work Scope

• Ability to communicate, receive and understand instructions regarding duties to be performed.

• Demonstrated ability to pay attention to details and quality-minded work habits.

• Demonstrated ability to communicate with co-workers and leadership.

• Ability to work in a fast-paced and stressful environment.

• Demonstrated ability to work at assigned workstation.

• Maintain daily production output.

• Perform Job with guidance.

• Receive verbal instructions on duties.

• Read/follow procedures/schematics for standard operations.

Education and Experience:

• High School Diploma/GED or local equivalent • 0 to 6 months of related manufacturing experience

Physical Requirements:

• Prolonged periods standing and walking.

• Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery.

• Must be able to visually inspect machines.

• Must be able to lift and carry up to 50 pounds.