דרושים Senior Software Engineer Project Kuiper ב-אמזון ב-United States, Washington, Redmond

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
As a senior systems development engineer, you will work with a wide variety of functional groups and will be involved in the design and implementation of software systems for phased array antennas validation and test, as well as overall system integration:- Develop tools for characterizing antenna RF and system performance.
- Develop software and test rack automation to support production test stations.
- Support electrical and software bring-up, debug of new hardware.- Plan, develop and implement environmental test activities for phased array antennas.
- Implement DSP FPGA firmware to map high-level algorithms from Matlab or C to architecture-specific code.

- BS or MS in electrical engineering, computer engineering or computer science, or equivalent experience
- 5+ years of experience with C/C++ and Python or other scripting languages. Experience automating, building, and testing systems
- Experience with HW/SW bring up and debugging
- Experience working in a hardware lab with oscilloscopes, signal generators, power supplies, and other test equipment

- Solid fundamental CS / EE skill set with hands-on industry or university experience in embedded software development
- Knowledge of FPGA systems, GPIO/I2C/SPI and peripheral interfacing.
- Experience with RTL and FPGA development tools
- Experience with Matlab or tools alike
- Knowledge of Database systems

Key job responsibilities
* Design, develop and maintain our iOS mobile applications
* Work with team members to investigate design approaches, prototype technology and evaluate technical feasibility
* Be part of an agile development process to deliver high-quality software

- 3+ years of non-internship professional software development experience
- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience
- Experience programming with at least one software programming language

- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience
- Bachelor's degree in computer science or equivalent

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We're looking for a Senior Structural/Mechanical Engineer with a background in space vehicle designs and electro-mechanical systems integration. The ideal candidate has experience making major optimization trades for satellite bus architectures including integration with payload subsystems. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to convert analytic trade studies to a qualified physical vehicle, while optimizing for high volume production and meeting cross discipline requirements. The candidate will design, analyze, and test satellite primary and secondary structures while ensuring all requirements are met.Key job responsibilities
- Perform mechanical design and layout trade studies for satellite primary structure contributing to overall system architecture including inputs and requirements from cross discipline teams - Electrical, RF, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test.
- Generate detailed designs via CAD systems and engineering drawings with appropriate geometric dimensioning and tolerancing (GD&T)
- Conduct or oversee static, dynamic and modal structural analysis via finite element methods as needed to support design work.
- Deliver an efficient structural design capable of high volume production throughput (DFMA)
- Documentation and presentation of materials for technical design reviews
- Design and support test campaigns, both development and qualification/acceptance, for space hardware

- Bachelor’s degree in Structural or Mechanical Engineering or related discipline, or equivalent experience.
- 6+ years of experience including significant time designing structural systems for aerospace.
- 4+ years of experience with structural materials and processes including metals, composites, bonded and bolted joints.
- 3+ years of experience in structural sizing including classical methods (hand calculations) and Finite Element Analysis (FEA) of primary and secondary structures.

- Advance degree (Master’s or PhD) in structural or mechanical engineering or related discipline
- CAD expertise (Siemens NX or equivalent, NX Teamcenter, GD&T per ASME y14.5)
- Finite element analysis skills – (FEMAP/NASTRAN or equivalent)
- Experience supporting development and qualification test campaigns of space/flight hardware
- Experience with common spacecraft subsystems: Power Systems (Solar Arrays, Batteries), Electric propulsion system integration, Secondary structures, Avionics assemblies, harnessing, ADCS elements and placement implications, Payload subsystems integration, Deployables, Release mechanisms, Moving mechanical assemblies, Thermal control systems and sizing (materials, finishes, MLI, HPAs, radiators), LV Interfaces.

We're looking for a hands-on Systems Engineer with a background in the requirements management, design for manufacturing, hardware/software development for hardware test.This is a role for a highly collaborative individual who will help us with optimizing for high volume production and meeting cross discipline requirements.Key job responsibilities
• Lead and mentor engineering teams in architecting test automation infrastructure, establishing technical standards, and driving system validation strategies across global manufacturing sites
• Drive architectural oversight and strategic roadmaps for production test systems, including implementation of new technologies, risk assessment, and long-term scalability planning
• Champion cross-functional initiatives to optimize system performance, develop robust validation frameworks, and enhance test capabilities through data-driven improvements
• Establish and drive technical partnerships with contract manufacturers, engineering teams, and stakeholders to standardize processes and implement best practices across sites
• Lead complex technical investigations and improvements requiring multi-team coordination, while developing engineering talent and fostering knowledge sharing across organizationsA day in the life

- Experience leading the design, automation, deployment, and support of large-scale infrastructure
- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust
- Experience with Linux/Unix
- Experience with CI/CD pipelines build processes
- 3+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience
- 5+ years of systems design, software development, operations, automation, and process improvement experience
- Bachelor's degree in electrical engineering, computer engineering, or equivalent

- Experience with distributed systems at scale
- Experience writing technical documents, project plans and progress reports to leadership and to stakeholders
- Experience in mentoring, leading, or managing more junior engineers
- Master's degree in electrical engineering, computer engineering, or equivalent

Export Control Requirement:
Key job responsibilitiesParticipate in all phases of SDLC including requirements gathering, design, code, test, and code/test coverage.
Developing embedded software in assembly, C, C++, Rust or other languages
Have in-depth knowledge with real-time embedded software philosophies and practices
Have expertise with Linux and RTOS
Review schematics, logic analyzer, and embedded software (bare-metal) trouble-shooting techniques
Familiarity with cryptography, threat modeling, and secure SDLC, TrustZone, bootloader.
Develop embedded software in C, C++, Rust, or other modern languages.
Write drivers for peripherals and interfaces such as I2C/I3C, SPI, UART, GPIO etc.

- 7+ years of non-internship professional software development experience
- 7+ years of programming with at least one software programming language experience
- 7+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience
- Experience as a mentor, tech lead or leading an engineering team

- 10+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience
- Master's degree in computer science or equivalent

- Characterizing subsystems and systems related to antennas
- Complex data storage
- Hardware test automation
- Firmware design and implementation
- Application development
- Design automation for 2D and 3D structures
- Develop bring up tools and scripts for phased array systemsExport Control Requirement:

- 5+ years of non-internship professional software development experience
- 5+ years of programming with at least one software programming language experience
- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience
- Experience as a mentor, tech lead or leading an engineering team

- 5+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience
- Master's degree in computer science or equivalent

Export Control Requirement:
Key job responsibilities
• Be the first point of contact between production, test, and design teams for operational support and triage of issues regarding hardware testing and manufacturing.
• Work to optimize manufacturing test flows for avionics systems, improving quality, efficiency, rate, and overall robustness of the process flow.
• Review and approve manufacturing processes and/or work procedures for assembly and test of avionics devices.
• Drive disposition and corrective actions for non-conformances occurring during production testing.
• Lead MRB efforts for avionics PCBAs/subsystems and driving RCA of nonconforming materials with development engineers.
• Provide training and improve work instructions for production operators to reduce need for engineering support on repeat issues.
• Troubleshoot and repair test set ups.
• Work with the test engineering team to improve test stability, reduce test time, and guarantee the quality of the measurement data.
• Work with production manufacturing engineering to improve process flow and reduce test set up and workmanship errors.
• Develop reporting tools on manufacturing KPIs.
• Travel to CMs to set up on-site testing and train technicians/operators.A day in the life
As a Sr. Power Avionics Hardware Test Engineer you will work within the development engineering team to support production of avionics hardware. You will be responsible for dispositioning nonconforming parts, and leading the material review board (MRB) for your system(s); working with the design team to root-cause issues for both components and test systems. You will support the overall manufacturing test flow and strive for process excellence, looking for opportunities to improve yield and efficiency. You will be an expert in how your system(s) are tested and provide training support for manufacturing technicians, as well as co-develop and sign off on manufacturing procedures.

• BS degree electrical engineering or equivalent experience.
• 7+ years demonstrated experience in a design, test, or production manufacturing role with new or established electronics product lines.
• Experience with manufacturing test flows and automation within space, automotive, industrial, or consumer electronics industries.
• Experience or familiarity with root cause analysis of electronic devices.

• Experience with space hardware qualification and test campaigns.
• Experience across a whole product lifecycle, from conception to sustained production.
• Experience in statistical analysis of manufacturing processes (Cpk, Ppk, etc.)
• Experience working with interdisciplinary teams to execute product design from concept to production
• Demonstrated ability to manage technical projects from inception to mature execution.
• Fundamental knowledge of PCBA manufacturing and test flows.
• Solid understanding of PCBA bring-up, test, and debug.
• Experience with data analysis tools (Python, MATLAB, etc.) to decompose manufacturing process efficiency, yields, etc.