דרושים Die Maker ב-United States

Maintain and support existing tooling. Provide good centerline spacing lay out for experimental molds, commercial molds, MTD´s and devices with little to no supervision. Able to design experimental molds, commercial...

Essential Duties and Responsibilities

Job Summary

In this role, you will be a customer focused individual responsible for completing preventative maintenance as scheduled, on injection molds. Analytical and excellent trouble shooting skills along with a drive for continuous improvement. Interpret part prints and/or mold prints to complete quality repairs to molds and secondary equipment. Perform polishing work, operate tool room equipment, surface grinders, Bridgeport milling machines, lathes, cutter grinders and sinker EDM.

Maintain and support existing tooling.
Provide good centerline spacing lay out for experimental molds, commercial molds, MTD´s and devices with little to no supervision.
Able to design experimental molds, commercial molds, MTD´s and devices with little to no supervision.
Coordinate tooling orders for manufacturing plants.
Good understanding of tools and processes within the individual’s region to support the West plants and other engineering departments with tooling issues, global tooling standardization questions and best practices
Assume responsibility for various assigned projects to improve product quality and tooling designs.
Work with cross-functional teams throughout all West locations to develop best practice standards.
Maintain awareness of new technology trends, materials, and design/analytical software
High understanding and aligned with company and department objectives.
Self-sufficient and able to work with little to no supervision.
Follow FDA, cGMP, ISO, and other applicable regulations.
May load and unload raw materials and equipment and set up and operate a variety of machines according to instructions.
May start and monitor machine operation to commence the production process, detect malfunctions/out-of-tolerance machining, and make any necessary adjustments to ensure product specifications are met throughout the process.
May perform quality control, following appropriate reporting and documentation procedures.
May transfer finished product, raw materials, tools, or equipment between work areas by using hand trucks or powered lift trucks (standing and/or sitting) and may perform routine maintenance tasks on machines as required.
May use the ability to translate mechanical documents and engineering drawings into appropriate dimensions for production.
May use the ability to correctly read common hand measuring tools such as outside micrometers, bore micrometers, dial indicators, etc. and inspect parts with appropriate measuring equipment to ensure results are within specification.
May instruct fellow employees as needed and assist in the orientation and training of new employees when appropriate.
Other duties as assigned.

Additional Responsibilities

Modifies and/or constructs tools, fixtures and mold components utilizing manual metal working machinery.
Able to perform own machine setups with no supervision.
Troubleshoot electrical problems with Hot Runner / Valve gated systems, repair and rebuild.
Understands form fit and function in mold construction.
Performs close‐tolerance machining using detailed blueprints, drawings, and sketches.
Uses precision measuring instruments in the fabrication of various metals and plastic tools and parts.
Performs accurate layout of tolerance and angles required to complete assignments.
Computes dimensions involving radii and compound angles.
Recommends ideas for improvement.

Conforms with and abides by all regulations, policies, work procedures, instruction, and all safety rules.

Exhibits regular, reliable, punctual and predictable attendance.

Education

Education or Equivalent Experience: High School or equivalent

Work Experience

Minimum 5 years of relevant experience. Prior manufacturing experience in an industrial setting (pharmaceutical industry experience preferred). required
Advanced in using SolidWorks. required
Excellent computer skills required including all MS Office applications. required

Preferred Knowledge, Skills and Abilities

Good understanding in machining and fabrication equipment and methods (e.g. milling, turning, grinding, eroding, etc.).
Familiar with cGMP, ISO, and FDA standards.
Familiar with AutoCAD, Finite Element Analysis, Computational Fluid Dynamics, and PDM Pro.
Able to be aware of all relevant SOPs as per Company policy as they are related to the position covered by this Job Description
Support and contribute in Lean Sigma programs and activities towards delivery of the set target
Trade school classes are preferred.
Welding skills (TIG/laser)
Able to be aware of all relevant SOPs as per Company policy as they are related to the position covered by this Job Description
Support and contribute in Lean Sigma programs and activities towards delivery of the set target
Able to comply with the company’s safety policy at all times.
Able to comply with the company’s quality policy at all times.

Physical Requirements

Medium-Exerting up to 50lb/22kg of force occasionally and/or up to 20lbs/9kg of force frequently, and/or up to 10lbs/4kgs of force constantly to move objects.

Additional Requirements

Must be able to negotiate and effectively resolve conflicts when required
Able to routinely use standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Position operates in a professional office environment. May stand or sit for extended periods of time
Must be able to communicate effectively with written and oral skills, make quick decisions, interpret data, read and write, speak in front of groups, express and exchange ideas, understand direction and adhere to procedures
Organizational skills will enable planning, prioritization and achievement of goals especially of importance for the successful execution of related activities
Read and interpret data, information and documents
Ability to quickly adapt to changes in a dynamic environment and must maintain the ability to work well with others in a variety of situations
Effective personal time management skills. Must be able to multi-task, work under time constraints, problem solve, and prioritize
Ability to make independent and sound judgments
Observe and interpret situations, analyze and solve problems
Must be able to speak English fluently

משרות נוספות שיכולות לעניין אותך

Flex Mold maker United States, Illinois

Flex Mold Maker United States, Illinois

Johnson Electric Mold Setter United States, Illinois, Springfield

14.10.2025

Google UX Designer YouTube Effect Maker United States, California

שיתוף

Bachelor's degree or equivalent practical experience. 4 years of interaction design experience in product design or UX design. Experience working on effect making tools or analogous creation tools. Experience designing...

Note: By applying to this position you will have an opportunity to share your preferred working location from the following:.

Minimum qualifications:

Bachelor's degree or equivalent practical experience.
4 years of interaction design experience in product design or UX design.
Experience working on effect making tools or analogous creation tools.
Experience designing or creating effects for video creation platforms.
Include a portfolio, website, or any other relevant link to your work in your resume (providing a viewable link or access instructions).

Preferred qualifications:

Master's degree in Design, Human-Computer Interaction, Computer Science, a related field, or equivalent practical experience.
2 years of experience working in a complex, cross-functional organization.
1 year of experience leading design projects.
Experience with mobile video creation or editing products.
Experience using or designing for visual scripting platforms.

משרות נוספות שיכולות לעניין אותך

07.09.2025

Apple Model Maker United States, West Virginia

שיתוף

Able to work in team environment. Initiative to complete tasks independently, from start to finish. Excellent interpersonal and communication skills. A keen eye for detail. Organizational and time management skills....

Note: Apple benefit, compensation and employee stock programs are subject to eligibility requirements and other terms of the applicable plan or program.

Able to work in team environment
Initiative to complete tasks independently, from start to finish
Excellent interpersonal and communication skills
A keen eye for detail
Organizational and time management skills
Self starter with ability to multi-task and prioritize workday/projects independently
Strong problem-solving and analytical skills
Basic PC and Mac knowledge

Experience setting up and operating CNC machines
HEIDENHAIN CNC control programming skills is a plus
Good overall understanding of CNC programs including formatting and editing
Familiar with machine tools for drilling, milling and grinding

משרות נוספות שיכולות לעניין אותך

04.09.2025

Ford Tool & Die Production Supervisor Automotive Forming United States, Illinois

שיתוף

Coach Safety, Quality and Productivity to ensure objectives are met through following standardized work. Optimize throughput in accordance with budgets and cost objectives. Suppot Kaizen (Continuous Improvement) and coach problem...

Position Duties

Coach Safety, Quality and Productivity to ensure objectives are met through following standardized work
Optimize throughput in accordance with budgets and cost objectives
Suppot Kaizen (Continuous Improvement) and coach problem resolution to the lowest level
Communication and Recognition
Meet FTT, inventory, cost, scrap, supply and tooling expense targets
Build Team Leader and Team Member capability
Create a conducive work environment for the team(s) to complete their assigned responsibilities/tasks
Basic administration of supervisory responsibilities and documents
Coordination of Safety Operating System activities including overhead safety, lifting and rigging and Energy Control and Lockout procedures
Lead skilled trades/die maintenance personnel to evaluate Die Readiness requirements for maintaining and improving production yields, output, and up time.
Supervise preventative maintenance schedules, inspections and repairs to minimize down time
Coordinate and schedule manpower and materials to meet maintenance requirements to minimize down time
Respnsible for monitoring day-to-day production processes, Draw panel formability, last hit process, contamination investigation
Understanding and expertise in draw die forming, maintenance of beads, trim steels and pierce operations
Ability to coordinate major and minor die repairs
Determine and correct root cause of related downtime issues
Assist and teach die maintenance troubleshooting techniques to improve mean time between failure and mean time to repair
Ensure start-up readiness for production
Coordination of maintenance activities with other plant operations
Identify and insure that safety hazards and unsafe practices are corrected and addressed
Performs other related duties.

משרות נוספות שיכולות לעניין אותך

04.09.2025

GEH

GE HealthCare Tool & Die Maker H33320 United States, Wisconsin

שיתוף

1. Perform all machine, bench and assembly operations to construct, modify, maintain, and repair tools, blanking and forming dies, jigs, fixtures, etc.2. Layout, select proper equipment and materials, determine machining...

The above statements reflect a general description of the major functions of the job and shall not be construed as a detailed description of all the work requirements that may be inherent in the classifications.

Responsibilities-

1. Perform all machine, bench and assembly operations to construct, modify, maintain, and repair tools, blanking and forming dies, jigs, fixtures, etc.

2. Layout, select proper equipment and materials, determine machining variables and ultimately machine high quality tools, jigs and fixtures to critical tolerances.

3. Plan, layout and perform all operations to fabricate and construct a diversified line of sheet metal products to customer's specifications or perform development work on new products.

4. Construct, alter and repair pre-production models of complicated and intricate design and construction.

5. Perform all jig bore machining on a wide variety of work where considerable skill is required to maintain a high degree of accuracy on sizes and related dimensions.

6. Check own work and work of others to insure tolerances per specifications.

May troubleshoot installed tools, fixtures, jigs and dies at the operator's workplace to determine source of problem and make corrections.

7. Use a wide variety of precision measuring devices such as indicators, micrometers, scales, etc.

8. Provide technical direction and layout work for personnel as assigned.

9. Work from drawings, sketches, specifications and oral and/or written instructions to complete projects with little or no direction from others.

Qualifications-

1. Have completed State of Wisconsin Indentured apprentice program in Tool & Die.

2. Able to discriminate visually to perform various checks*

3. Able to discriminate auditorily to perform noise checks*

4. Bending motions from waist required*

5. Able to handle/lift/push/pull various assemblies*

6. Repetitive hand and wrist motion required*

7. Extended period of standing/sitting*

* The above listed physical elements are generic to the overall job classification and may vary by individual job assignments.

Quality Specific Goals:

1. Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position

2. Complete all planned Quality & Compliance training within the defined deadlines

3. Identify and report any quality or compliance concerns and take immediate corrective action as required

We will not sponsor individuals for employment visas, now or in the future, for this job opening.

משרות נוספות שיכולות לעניין אותך

04.09.2025

Google UX Designer YouTube Effect Maker United States, California

שיתוף

Note: By applying to this position you will have an opportunity to share your preferred working location from the following:.

Minimum qualifications:

Bachelor's degree or equivalent practical experience.
4 years of interaction design experience in product design or UX design.
Experience working on effect making tools or analogous creation tools.
Experience designing or creating effects for video creation platforms.
Include a portfolio, website, or any other relevant link to your work in your resume (providing a viewable link or access instructions).

Preferred qualifications:

Master's degree in Design, Human-Computer Interaction, Computer Science, a related field, or equivalent practical experience.
2 years of experience working in a complex, cross-functional organization.
1 year of experience leading design projects.
Experience with mobile video creation or editing products.
Experience using or designing for visual scripting platforms.

משרות נוספות שיכולות לעניין אותך

24.08.2025

Google UX Designer YouTube Effect Maker United States, California

שיתוף

Note: By applying to this position you will have an opportunity to share your preferred working location from the following:.

Minimum qualifications:

Bachelor's degree or equivalent practical experience.
4 years of interaction design experience in product design or UX design.
Experience working on effect making tools or analogous creation tools.
Experience designing or creating effects for video creation platforms.
Include a portfolio, website, or any other relevant link to your work in your resume (providing a viewable link or access instructions).

Preferred qualifications:

Master's degree in Design, Human-Computer Interaction, Computer Science, a related field, or equivalent practical experience.
2 years of experience working in a complex, cross-functional organization.
1 year of experience leading design projects.
Experience with mobile video creation or editing products.
Experience using or designing for visual scripting platforms.

United States, Arizona, Tempe

משרות נוספות שיכולות לעניין אותך

1 2 3 4 5 6

West PharmaMold Maker

783937238

21.11.2025

שיתוף

תיאור:

Job Summary

Essential Duties and Responsibilities

Maintain and support existing tooling.
Provide good centerline spacing lay out for experimental molds, commercial molds, MTD´s and devices with little to no supervision.
Able to design experimental molds, commercial molds, MTD´s and devices with little to no supervision.
Coordinate tooling orders for manufacturing plants.
Good understanding of tools and processes within the individual’s region to support the West plants and other engineering departments with tooling issues, global tooling standardization questions and best practices
Assume responsibility for various assigned projects to improve product quality and tooling designs.
Work with cross-functional teams throughout all West locations to develop best practice standards.
Maintain awareness of new technology trends, materials, and design/analytical software
High understanding and aligned with company and department objectives.
Self-sufficient and able to work with little to no supervision.
Follow FDA, cGMP, ISO, and other applicable regulations.
May load and unload raw materials and equipment and set up and operate a variety of machines according to instructions.
May start and monitor machine operation to commence the production process, detect malfunctions/out-of-tolerance machining, and make any necessary adjustments to ensure product specifications are met throughout the process.
May perform quality control, following appropriate reporting and documentation procedures.
May transfer finished product, raw materials, tools, or equipment between work areas by using hand trucks or powered lift trucks (standing and/or sitting) and may perform routine maintenance tasks on machines as required.
May use the ability to translate mechanical documents and engineering drawings into appropriate dimensions for production.
May use the ability to correctly read common hand measuring tools such as outside micrometers, bore micrometers, dial indicators, etc. and inspect parts with appropriate measuring equipment to ensure results are within specification.
May instruct fellow employees as needed and assist in the orientation and training of new employees when appropriate.
Other duties as assigned.

Additional Responsibilities

Modifies and/or constructs tools, fixtures and mold components utilizing manual metal working machinery.
Able to perform own machine setups with no supervision.
Troubleshoot electrical problems with Hot Runner / Valve gated systems, repair and rebuild.
Understands form fit and function in mold construction.
Performs close‐tolerance machining using detailed blueprints, drawings, and sketches.
Uses precision measuring instruments in the fabrication of various metals and plastic tools and parts.
Performs accurate layout of tolerance and angles required to complete assignments.
Computes dimensions involving radii and compound angles.
Recommends ideas for improvement.

Conforms with and abides by all regulations, policies, work procedures, instruction, and all safety rules.

Exhibits regular, reliable, punctual and predictable attendance.

Education

Education or Equivalent Experience: High School or equivalent

Work Experience

Minimum 5 years of relevant experience. Prior manufacturing experience in an industrial setting (pharmaceutical industry experience preferred). required
Advanced in using SolidWorks. required
Excellent computer skills required including all MS Office applications. required

Preferred Knowledge, Skills and Abilities

Good understanding in machining and fabrication equipment and methods (e.g. milling, turning, grinding, eroding, etc.).
Familiar with cGMP, ISO, and FDA standards.
Familiar with AutoCAD, Finite Element Analysis, Computational Fluid Dynamics, and PDM Pro.
Able to be aware of all relevant SOPs as per Company policy as they are related to the position covered by this Job Description
Support and contribute in Lean Sigma programs and activities towards delivery of the set target
Trade school classes are preferred.
Welding skills (TIG/laser)
Able to be aware of all relevant SOPs as per Company policy as they are related to the position covered by this Job Description
Support and contribute in Lean Sigma programs and activities towards delivery of the set target
Able to comply with the company’s safety policy at all times.
Able to comply with the company’s quality policy at all times.

Physical Requirements

Medium-Exerting up to 50lb/22kg of force occasionally and/or up to 20lbs/9kg of force frequently, and/or up to 10lbs/4kgs of force constantly to move objects.

Additional Requirements

Must be able to negotiate and effectively resolve conflicts when required
Able to routinely use standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Position operates in a professional office environment. May stand or sit for extended periods of time
Must be able to communicate effectively with written and oral skills, make quick decisions, interpret data, read and write, speak in front of groups, express and exchange ideas, understand direction and adhere to procedures
Organizational skills will enable planning, prioritization and achievement of goals especially of importance for the successful execution of related activities
Read and interpret data, information and documents
Ability to quickly adapt to changes in a dynamic environment and must maintain the ability to work well with others in a variety of situations
Effective personal time management skills. Must be able to multi-task, work under time constraints, problem solve, and prioritize
Ability to make independent and sound judgments
Observe and interpret situations, analyze and solve problems
Must be able to speak English fluently