דרושים Manufacturing Operator ב-United States, California, San Jose

As a PCBA Manufacturing Test Engineer, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Kuiper’s internal test development teams and our manufacturing partners. You will ensure successful test deployment by documenting procedures, training CM personnel, and providing ongoing onsite support. You will have excellent debugging skill with the ability to dive deep and determine the root-cause of test failures.Export Control Requirement:
Key job responsibilities
• Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.
• Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.
• Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.
• Analyze data to identify failure trends and provide recommendations for PCBA, process, and test system improvement.
• Develop procedures and documentation for use by test operators.
• Train operators on test processes and support recurring certification programs.
• Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.
• Run small teams to accomplish short-term objectives and implement strategic initiatives.
A day in the life

- Bachelor’s Degree in Electrical Engineering, Electrical Engineering Technology, or related field
- 5+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- 5+ years of experience integrating software and hardware systems.
- 5+ years’ experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.) to debug complex PCBAs.
- Ability to write detailed test station operating procedures
- Ability to create deployment/capacity plans for multiple testers at multiple CMs
- Experience with Linux/scripting

- 7+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- Experience with test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016).
- Knowledge of software tools for test automation (e.g. NI LabVIEW and TestStand, Python, etc.)
- Experience with electrical design including power supplies, FPGAs, sensors, RF, and high-speed digital interfaces
- Proven ability to run small teams to achieve objectives

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Come solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, performant, low-cost satellite bus and payload. As a Sr. PCBA Manufacturing Engineer, you will work across design engineering, supply-chain, quality, and our manufacturing partners to drive Project Kuiper electrical sub-system and PCBA manufacturing and delivery.Key job responsibilities- Drive the PCBA Manufacturing Qualification process at the CM. Define manufacturing readiness requirements and lead key milestone reviews to ensure all production readiness deliverables are complete.
- Investigate and develop new manufacturing technology and methodologies to enhance PCBA quality, reliability, throughput, and cost.
- Drive closure of all operational issues during pre-production builds. Work within Operations, Supply Chain, R&D, and Reliability Engineering to implement and optimize manufacturing processes and improve yields for production ramp.
- Investigate failures/defects in production, test, and integration. Identify and mitigate underlying root causes to prevent reoccurrence as part of continuous improvement efforts.
- Identify opportunities for risk reduction and simplification of PCBA manufacturing processes.
- Deliver manufacturing processes capabilities including equipment capability, quality controls, materials characterization, and standardized rework practices.
- Actively monitor the success of products and processes through production ramp. Provide regular status reports of PCBAs progress from design to production.
- Deploy and qualify polymerics (staking, underfill, and conformal coat) equipment for high volume production.

- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 3+ years of experience in PCBA/PCB production/processes and manufacturing engineering.
- Experience in board assembly processes and equipment: Stencil, paste print, SPI, pick & place, SMT reflow, AOI, 5DX, selective solder, flying probe, and wash.
- Experience leading DFX reviews for manufacturability, testability, quality, and reliability.
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.
- Strong writing skills.

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 5+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 3+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC-A-610H Class 3, IPC J-STD-001H compliance
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).

Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Come solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, performant, low-cost satellite bus and payload. As a Sr. PCBA Manufacturing Engineer, you will work across design engineering, supply-chain, quality, and our manufacturing partners to drive Project Kuiper electrical sub-system and PCBA manufacturing and delivery.Key job responsibilities- Drive the PCBA Manufacturing Qualification process at the CM. Define manufacturing readiness requirements and lead key milestone reviews to ensure all production readiness deliverables are complete.
- Investigate and develop new manufacturing technology and methodologies to enhance PCBA quality, reliability, throughput, and cost.
- Drive closure of all operational issues during pre-production builds. Work within Operations, Supply Chain, R&D, and Reliability Engineering to implement and optimize manufacturing processes and improve yields for production ramp.
- Investigate failures/defects in production, test, and integration. Identify and mitigate underlying root causes to prevent reoccurrence as part of continuous improvement efforts.
- Identify opportunities for risk reduction and simplification of PCBA manufacturing processes.
- Deliver manufacturing processes capabilities including equipment capability, quality controls, materials characterization, and standardized rework practices.
- Actively monitor the success of products and processes through production ramp. Provide regular status reports of PCBAs progress from design to production.
- Deploy and qualify polymerics (staking, underfill, and conformal coat) equipment for high volume production.

- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 3+ years of experience in PCBA/PCB production/processes and manufacturing engineering.
- Experience in board assembly processes and equipment: Stencil, paste print, SPI, pick & place, SMT reflow, AOI, 5DX, selective solder, flying probe, and wash.
- Experience leading DFX reviews for manufacturability, testability, quality, and reliability.
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.
- Strong writing skills.

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 5+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 3+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC-A-610H Class 3, IPC J-STD-001H compliance
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).

As a PCBA Manufacturing Test Engineer, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Kuiper’s internal test development teams and our manufacturing partners. You will ensure successful test deployment by documenting procedures, training CM personnel, and providing ongoing onsite support. You will have excellent debugging skill with the ability to dive deep and determine the root-cause of test failures.Export Control Requirement:
Key job responsibilities
• Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.
• Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.
• Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.
• Analyze data to identify failure trends and provide recommendations for PCBA, process, and test system improvement.
• Develop procedures and documentation for use by test operators.
• Train operators on test processes and support recurring certification programs.
• Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.
• Run small teams to accomplish short-term objectives and implement strategic initiatives.
A day in the life

- Bachelor’s Degree in Electrical Engineering, Electrical Engineering Technology, or related field
- 5+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- 5+ years of experience integrating software and hardware systems.
- 5+ years’ experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.) to debug complex PCBAs.
- Ability to write detailed test station operating procedures
- Ability to create deployment/capacity plans for multiple testers at multiple CMs
- Experience with Linux/scripting

- 7+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- Experience with test plans and protocols related to established Space Hardware test processes (GEVS / SMC-S-016).
- Knowledge of software tools for test automation (e.g. NI LabVIEW and TestStand, Python, etc.)
- Experience with electrical design including power supplies, FPGAs, sensors, RF, and high-speed digital interfaces
- Proven ability to run small teams to achieve objectives

As a ML engineer with the AGI team, you will be responsible for leading the development of novel algorithms and techniques to advance the state of Large Language Model (LLM) training. You will leverage Amazon’s heterogeneous data sources and large-scale computing resources to accelerate development of multimodal Large Language Models and Generative Artificial Intelligence solutions. You will collaborate closely with the Applied Scientists on LLM fine tuning experiments and prototypes to build training workflows.Key job responsibilities
The ideal candidate is passionate about new opportunities and has a demonstrable track record of success in delivering new features and products. A commitment to team work, hustle, and strong communication skills (to both business and technical partners) are absolute requirements. Creating reliable, scalable, and high performance AI products requires exceptional technical expertise, a sound understanding of the fundamentals of Computer Science and Machine Learning. This person has thrived and succeeded in delivering high quality technology products/services in a hyper-growth environment where priorities shift fast.A day in the life- Work closely with Applied scientists to process data, scale machine learning models while optimizing
- Will work in an Agile/Scrum environment to deliver high quality software against tight schedules.

- 3+ years of non-internship professional software development experience
- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience
- Experience programming with at least one software programming language

- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience
- Bachelor's degree in computer science or equivalent

Key job responsibilities
As a Sr. PCBA Manufacturing Test Engineer, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Kuiper’s internal test development teams and our manufacturing partners. You will ensure successful test deployment by documenting procedures, training CM personnel, and providing ongoing support. You will have excellent debugging skill with the ability to dive deep and determine the root-cause of a test failure.Key job responsibilities• Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.
• Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.
• Analyze data to identify failure trends and provide recommendations PCBA, process, and test system improvement.
• Develop procedures and documentation for use by test operators.
• Train operators on test processes and support recurring certification programs.
• Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.
• Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.
• Run small teams to accomplish short-term objectives and implement strategic initiatives.Export Control Requirements: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life

- Bachelor’s Degree in Electrical Engineering Electrical Engineering Technology or related field
- 8+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.
- 8+ years of experience integrating software and hardware systems.
- 8+ years of experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.) to debug complex PCBAs.
- Ability to write detailed test station operating procedures
- Ability to create deployment/capacity plans for multiple testers at multiple CMs
- Experience with Linux/scripting

- Master’s Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.
- 7+ years of experience in PCBA/PCB supply chain, manufacturing or engineering.
- 5+ years’ experience with industry standard PLM and DFX systems, Mentor/Valor preferred.
- Experience performing Design and Process Failure Modes and Effects Analyses.
- Experience with IPC standards for PCB, PCBA, and RFPC fabrication, assembly, and test.
- Experience in Polymeric application, including conformal coating, staking and underfill.
- Experience in solder alloys including leaded and lead free as well as next gen low temp alloys.
- Experience with flying probe test systems and DFT
- Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches.
- Experience providing hands-on experimental design and execution (Statistical analysis and DOE).
- Experience working independently and ensuring timely and accurate communication with contract manufacturers, suppliers, and 3rd party test and failure analysis partners.
- Ability to lead small teams in root-causing technical product manufacturability and process problems and drive implementation of solutions.
- Strong interpersonal and collaborative skills, enthusiasm for the team’s spirit of innovation and mission of improving manufacturability, quality, and reliability in cutting-edge technology.