דרושים Mechanic Operator ב-West Pharma ב-ארהב

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED Required

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED Required

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

In this role, you will be responsible for the production of components that meet or exceed pre-determined specifications. Responsible for inspection, packaging, labelling and completion of documentation necessary to provide quality, production and traceability records in accordance with Quality Systems ISO 9001/ ISO 13485.

• Ensures the quality of the parts produced by inspecting parts visually, ensures relevant documentation is recorded and signed off in real time.
• Maintaining accuracy of batch documentation at all times and ensuring that it is filled in and right first time.
• Completing measurements as required by the work instructions, reviewing measurement results and alerting appropriate personnel of any deviations from the customer specification or part print.
• Packages the parts according to customer specification and indicates the status of the part (accept/reject) according to proper procedure and specifications.
• Places finished product in correct location.
• Understands and safely operates all equipment.
• Reports and/or corrects unsafe working conditions.
• Performs secondary operations as necessary to meet customer specifications.
• Performs general cleaning of machines and ancillary equipment.
• Verifies the labels for correct part and lot numbers.
• Maintains proper level of packaging supplies at each machine.
• Maintains work areas in a clean and orderly manner by practicing good housekeeping.
• Define machine status on OEE System in order to determine machine downtime and run time.
• Compliance to all site Environmental, Health and Safety requirements, training and regulations.
• Compliance to all local site company policies, procedures and corporate policies.
• Support and contribute to Lean Sigma programs and activities towards delivery of the set target.
• Act in accordance with the company’s guiding principles and adherence to the corporate Code of Conduct.
• Performs additional duties at the request of the direct supervisor.
• Maintains methods/procedures and all supporting documentation to meet the requirements of Quality Systems ISO 13485:2016.

• High School Diploma or GED required

• Previous production work experience would be an advantage.
• Knowledge of Good Manufacturing Practices (GMP) requirements would be an advantage.

• Must have good verbal reasoning, numerate ability and mechanical aptitude skills.
• Must have good communication skills, both written and oral.
• Must have good organizational skills.
• Must be able to work in a team environment.
• Basic knowledge and understanding of a computer.
• Must be willing to work in a controlled environment, which involves the wearing of a gown, cap and relevant personal protective equipment.

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED required

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

• Under the supervision of a trainer or supervisor perform the following duties...
• Process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED Required.

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

In this role, you will be responsible for the production of components that meet or exceed pre-determined specifications. Responsible for inspection, packaging, labelling and completion of documentation necessary to provide quality, production and traceability records in accordance with Quality Systems ISO 9001/ ISO 13485.

• Ensures the quality of the parts produced by inspecting parts visually, ensures relevant documentation is recorded and signed off in real time.
• Maintaining accuracy of batch documentation at all times and ensuring that it is filled in and right first time.
• Completing measurements as required by the work instructions, reviewing measurement results and alerting appropriate personnel of any deviations from the customer specification or part print.
• Packages the parts according to customer specification and indicates the status of the part (accept/reject) according to proper procedure and specifications.
• Places finished product in correct location.
• Understands and safely operates all equipment.
• Reports and/or corrects unsafe working conditions.
• Performs secondary operations as necessary to meet customer specifications.
• Performs general cleaning of machines and ancillary equipment.
• Verifies the labels for correct part and lot numbers.
• Maintains proper level of packaging supplies at each machine.
• Maintains work areas in a clean and orderly manner by practicing good housekeeping.
• Define machine status on OEE System in order to determine machine downtime and run time.
• Compliance to all site Environmental, Health and Safety requirements, training and regulations.
• Compliance to all local site company policies, procedures and corporate policies.
• Support and contribute to Lean Sigma programs and activities towards delivery of the set target.
• Act in accordance with the company’s guiding principles and adherence to the corporate Code of Conduct.
• Performs additional duties at the request of the direct supervisor.
• Maintains methods/procedures and all supporting documentation to meet the requirements of Quality Systems ISO 13485:2016.

• High School Diploma or GED required

• Previous production work experience would be an advantage.
• Knowledge of Good Manufacturing Practices (GMP) requirements would be an advantage.

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED required

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English