דרושים Sup Ops Maint Jurong ב-West Pharma ב-Singapore, Singapore

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED preferred

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

Under the supervision of a trainer or supervisor perform the following duties...

• Process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED preferred

• No min required

• Must possess an acute attention to detail.
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP).
• General use of computer work station and ability to use SAP commands is preferred.
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities.
• Must be able to train and guide others as required.
• Must be able to read and write in English.

• Under the supervision of a trainer or supervisor perform the following duties...
• process trimmed product through washing and drying process per site SOI’s and work instructions.
• Ensure that the equipment is set up accurately.
• Ensure continual flow of product through the module from the mold press thru the trim press.
• Operate a mold press to produce molded panels of product following site SOI’s and work instructions.
• Operate a manual / automatic trim press as needed following site SOI’s and work instructions.
• Process product through any required special treatments such as sort, silicone, chlorination, etc.
• As needed, set up pack scales for weighing and packing of finished product and prepare carton labels for boxing and shipping.
• Alert the Area Supervisor to conditions that may prevent meeting production and quality expectations.
• Accurately maintain all required documentation and paperwork to ensure product traceability.
• Inspect molded/trimmed work to ensure quality product is being produced.
• Move materials into and out of the area as required.
• Properly clean and prep assigned workstations/equipment during and prior to the next available shift.
• Promotes and supports a Lean environment.
• Conforms with and abides by all corporate and site-specific regulations, policies, work procedures, instruction, and all safety rules.
• Exhibits regular, reliable, punctual and predictable attendance.
• Performs other duties as assigned based on business needs.

• High School Diploma or GED preferred

• No min required

• Must possess an acute attention to detail
• Basic computer skills, i.e. use a mouse/keyboard.
• Ability to apply Good Manufacturing Practices (GMP)
• General use of computer work station and ability to use SAP commands is preferred
• Must be willing and able to work as a team member and make general decisions within authorized job responsibilities
• Must be able to train and guide others as required.
• Must be able to read and write in English

The Maintenance Supervisor is a people manager responsible for leading and developing a multi-tier team of Technicians (T1–T3) across electrical, mechanical, pneumatic, hydraulic, and PLC-based systems. The Supervisor ensures reliable operation and compliance of all production and utility equipment supporting the manufacturing of pharmaceutical-grade rubber stoppers. This position requires both strong leadership and sound technical expertise to drive team performance, ensure safe practices, and maintain production uptime.

• People Leadership: Supervise a team of Technicians across 3 levels:
  • T1 (entry level) – provide hands-on guidance and close supervision.
  • T2 (intermediate level) – support development of autonomy and technical judgment.
  • T3 (Team Leads) – mentor and coordinate execution through delegation
• Conduct performance reviews, coaching, and development planning for all direct reports.
• Facilitate daily Tier meetings, assign tasks, and manage shift rosters.
• Technical Responsibilities:
  • Troubleshoot and resolve complex equipment issues involving electrical, mechanical, pneumatic, and hydraulic systems, including PLC-controlled machinery.
  • Ensure completion and accuracy of preventive and corrective maintenance using the site’s CMMS (SAP or equivalent).
  • Participate in root cause analysis (RCA), failure mode analysis, and implement countermeasures for chronic issues.
• Compliance and Documentation:
  • Ensure all maintenance activities are compliant with cGMP, safety, and cleanroom standards.
  • Maintain accurate maintenance records, risk assessments, and job safety analyses (JSAs).
  • Support audits and inspections by regulatory bodies and internal QA.
• Continuous Improvement:
  • Drive 5S, TPM, and reliability-centered maintenance (RCM) initiatives.
  • Collaborate with Engineering to support equipment upgrades and utility modifications.
• Collaboration and Communication:
  • Serve as the primary communication bridge between maintenance personnel, production, engineering, and QA.
  • Coordinate with external contractors or vendors during maintenance shutdowns or installations.

• Diploma or Degree in Mechanical, Electrical, or Mechatronics Engineering (or equivalent technical discipline).
• Minimum 8 years of experience in plant maintenance, including at least 3 years in a people management role, preferably within a pharmaceutical manufacturing or processing environment.

• Excellent leadership and interpersonal skills with a passion for mentoring.
• Hands-on troubleshooting and analytical skills.
• Proficiency in SAP or other CMMS platforms.
• Ability to read technical schematics, wiring diagrams, and mechanical drawings.
• Good written and verbal communication skills in English.
• Resilient under pressure and able to make decisions in fast-paced environments.

• Ability to work in challenging environments, including areas characterized by heat and dust, as well as in cleanroom settings.
• Physical endurance, flexibility, visual and hearing ability are required to perform tasks effectively.
• Willing to support execution of critical tasks beyond normal working hours should the need arise.
• Committed to lifelong learning to remain abreast of industry trends and new technologies.
• A team player and ability to work collaboratively with all levels.
• Conduct training with confidence, patience, empathy, and motivation.

• Perform cGMP Data Review on the analytical data generated in Lab Operations which may include raw materials and finished goods, product performance, container closure integrity, particle analysis, and/or microscopy/investigation
• Review the analytical raw data generated by laboratory operations according to established methods, protocols, Compendia and Work Instructions for cGMP compliance
• Review Electronic Data and Audit Trails for data integrity compliance
• Review Lab Operations Methods, Protocols, and Work Instructions for cGMP Compliance
• Responsible to review and approve of samples and / or batch release including review and approval of the finished Device History File documentation and Certificate of Compliance issuing.
• Responsible to review and approve of relevant packaging and respective graphics artwork
• Maintain working knowledge of computer software packages including MS Office suite, Adobe, MasterControl, LIMS, and LMS
• Collaborate as needed on proposed path forward regarding documentation questions
• Support preparations for periodical management reviews
• Initiate processes in SAP as needed related to finished batch release and sterilization processes

• Provide a “Customer Service” attitude when interacting with internal and external customers while accomplishing work, production, and achieving quality standards.
• Maintain a clean, orderly, and safe workstation and environment at all times.
• Conform with and abide by all regulations, policies, work procedures, instruction, and safety rules.
• Exhibit regular, reliable, and punctual attendance.
• Perform other duties as assigned based on business needs.
• Keep current with new GMP compliance guidance and internal QA procedures
• Support new GMP compliance guidance and Data Integrity initiatives

• Bachelor's Degree Technical Studies or Science or equivalent experience preferred

• 0-3 years of experience required and
• Minimum 2 years of cGMP experience preferred

• Able to be aware of all relevant standard operating procedures as per Company policy
• Support and contribute to Lean Sigma programs and activities towards delivery of the set target
• Possess ability to work independently and as part of a team with self-motivation, adaptability, and a positive attitude
• Willingness to learn new and review new analytical techniques
• Meet individual and departmental goals as required

• Ability to learn, understand, and remember normal tasks.
• Ability to hear, speak, and understand conversation in English.
• Must maintain the ability to work well with others in a variety of situations.
• Must be able to multi-task, work under time constraints, problem solve, and prioritize.
• Read and interpret data, information and documents
• Work under deadlines with constant interruptions