דרושים Mechanical Engineering - Summer Intern ב-Honeywell ב-ארהב

THE POSITION

Thehereat Honeywell, you will hold a senior leadership position and will beresponsible for leading the strategy for concurrent engineering,AME, maintenance, Accelerator, AI/OI and NPI across global ISC.

You will report directly to our BA Integrated Supply Chain Vice President.
KEY RESPONSIBILITIES

• Concurrence Engineering: Close the loops and gaps between NPI, ECNs and production products, driving actions and solutions among design engineering, AME, Quality, Sourcing, Planning, and production.
• AME: First pass yield program improvement, Manufacturing process improvement (group of technical experts), Digitalization tools implementation, Capex, budget and execution, automatization, manufacturing resiliency.
• NPI: Standardize the NPI process across all GBE/Regions with cross-functional alignment to ensure flawless transition execution. Enable inventory and bias control by leveraging Rapid Response capabilities
• Sourcing: Develop a standard end-to-end NPI procurement process with clear requirements for each development phase, aligned with the HON Global Development Model. Create a digital dashboard to track projects and compliance with key sourcing metrics. This role will lead the strategy for insourcing assessments, especially as it pertains to SAS contract mfg. post integration. The leader will be responsible for setting up new strategies to define core competencies on what is hard to source and defining the manufacturing strategy.
• Planning: Deploy and leverage the ‘NPI Metrics Scorecard’ to drive NPI production readiness. Integrate NPI metrics targets in Discovery and Development phase exits. Use digital tools to collect objective data on product readiness (FPY, cycle times, etc.).
• Quality: Standardize the NPI Quality process across GBE/Regions/site/RT in each NPI phase. Ensure cross-functional alignment on roles and responsibilities for a flawless product launch.
• Preventative Maintenance (PM): Standardize the TPM process globally, establish the appropriate maintenances process, procedures, and retinues to optimize uptimes and cost. As BA increases automation, the introduction of a PM program is critical to protect our investments and maintain our up-time metric expectations.
• Accelerator: This role will lead the Accelerator subfunction and focus on global alignment to the GDM, regional execution of Kaizen productivity, Poka Yoke campaigns, Sprint Deployments and revamping the Six Sigma and Lean Expert training.
• AI/OI: develop the platform and standard process for AI/OI for met analysis and recommendations by plant GBE, region and global.

YOU MUST HAVE

• Bachelor's degree in engineering or related technical skills.
• Minimum 10 years of leadership experience in supply chain, engineering or manufacturing with increasing responsibility in a complex, global environment is required.
• Proven track record of leading change in a complex, matrix organization.
• Strong team leadership and talent development.
• Experience leading application of AME in NPI process.
• Operational Excellence experience.
• Strong Leadership and influencing skillset.
• Lean expert and/ Black belt is highly desired.

WE VALUE

• Multi-function ISC experience, including experience with HSE, process safety management, quality, manufacturing, project and process engineering, procurement, delivery, inventory, supply chain planning, logistics, and manufacturing transitions.
• Proven track record of approaching business challenges from a macro perspective and resolving strategic issues effectively.
• Ability to manage multiple, complex projects and changing priorities; make sound decisions under pressure, and work effectively in a team environment.
• A strong bias for action with a results orientation.
• Capability to work on multiple projects and effectively manage priorities.
• Transformative mindset.
• Strong analytical and data driven to make decisions.
• Strong communication and influence skills.
• Experience in successful implementation/application of robotics and artificial intelligence within electronic product manufacturing.

• JOB ID: req482963
• Category: Integrated Supply Chain
• Location: 715 Peachtree Street, N.E.,Atlanta,Georgia,30308,United States
• Exempt

• JOB ID: 1662
• Remote Eligibility: On-Site
• Travel Required: 0-10%
• Hourly/Salary: Salary
• Relocation Available: Yes

Be part of a team responsible for mechanical design, simulation, analysis and test of Fans and Compressors in gas turbine engine applications within Honeywell Aerospace Technologies. You will support currently fielded products and assist in developing new products for a variety of turbofan, turboshaft and auxiliary power unit applications. You will apply mechanical design theory and physics to both execute analysis and contribute to continuous improvement of simulation methods.Key Responsibilities with Compressor Blades, Vanes, Disks and Impellers:

• Execute mechanical design and analysis – including vibration, deflection, fatigue crack growth, burst, HCF, LCF, thermal and stack analysis – and generate accompanying documentation capturing findings and results
• Support mechanical testing of components and engine modules in various lifecycle stages (rig, development, production) and perform data reduction/analysis on test data
• Develop and present engineering artifacts during structured design reviews
• Interpret engineering drawings via geometric dimensioning and tolerancing (GD&T)
• Contribute to technical mentoring, process/tool improvement and knowledge capture

YOU MUST HAVE

• Bachelor’s degree from an accredited institution in a technical discipline such as the sciences, technology, engineering or mathematics
• 4+ years’ mechanical design and analysis experience in turbomachinery or relevant field utilizing ANSYS software suite or comparable software. 3+ years’ experience required with PhD.
• 1+ years’ mechanical test experience in turbomachinery or relevant field

WE VALUE

• B.S., M.S. or PhD in aerospace or mechanical engineering
• Knowledge of test methodologies for mechanical robustness assessment
• Mechanical knowledge related to manufacturing, product support and field support
• Ability to conduct risk assessment and abatement plan
• Problem solving with root cause analysis (RCCA)
• Strong writing, speaking and presenting skills
• CAD based modeling experience (NX, UG, Solidworks, CATIA)

• JOB ID: req490283
• Category: Engineering
• Location: 111 S 34th St.,Phoenix,Arizona,85034,United States
• Exempt
• Due to US export control laws, must be a US citizen, permanent resident or have protected status.

• JOB ID: 2670
• Remote Eligibility: Hybrid
• Travel Required: 0-10%
• Hourly/Salary: Salary
• Relocation Available: Yes

Intelligrated Services, LLC is seeking a Mechanical Design Engineer II for our Mason, OHdistribution centers.

• Responsible for the technical quality and
  effectiveness of the mechanical design.
• Create and verify conveyor layout, detail, air, load, structural drawings, schematics,
  and equipment orders as applicable to the project
• Plan equipment layout, material flow, and
  measures to maintain efficient and safe utilization of resources and equipment
  on projects as assigned
• Work with other engineering disciplines in the development and application of
  material handling equipment and solutions as required in support of project
  needs.
• Direct and coordinate building of prototypes. Confer with researchers and other
  engineers to clarify and resolve problems found during execution, preparing
  design modifications as appropriate.
• Perform a variety of calculations and prepare detailed multi-view drawings based on
  engineering data and standard references.
• In the field, identify field safety concerns;
  confirm equipment was installed per plans; communicate design issues and
  improvements with customers, site superintendents, general contractors, and
  installation crews; adjust conveyor design to accommodate for field
  interferences.
• Provide planning, reporting, and management of the mechanical project, in addition to
  technical implementation.
• Take full ownership of the mechanical project elements and execute (and/or delegate)
  individual tasks throughout the project life cycle by coordinating and
  forecasting mechanical resources in-house and on site.
• Take a systems approach in understanding core design features, project elements, and
  overall mechanical architecture and manage the scope, budget (OAs, COs), and
  schedule, maintaining internal and external customer expectations throughout
  the project life cycle.

• Bachelor’s degree from an accredited institution in a Mechanical Engineering Technology or a related field.
• 5 + years of experience in Mechanical Engineering.
• Full term of experience must include:Autodesk, including AutoCAD, Vault, and Navisworks; Microsoft SharePoint,Excel, Word, and PowerPoint; Oracle; forecasting multi-million-dollar projects;green field “cradle to grave” project execution; identifying engineering safetyconcerns and design improvements related to safety; and communicating designissues and improvements with customers, site superintendents,
  generalcontractors and installation crews.
• Approximately 25% domestic/internationaltravel required.

• Industrial design talent
• Ability to work independently
• Willingness to learn new technologies
• Anopen, honest and team oriented personality
• Eagerness to get involved in hands-on work
• Creativity
• Some experience developing products or sustaining existing products
• Experience in a highly regulated and safety critical domain

• JOB ID: HRD260702
• Category: Engineering
• Location: 7901 Innovation Way,Mason,Ohio,45040,United States
• Exempt

As an

KEY RESPONSIBILITIES

• Serve as the single point of contact and customer focal onsite, supporting the fractional aircraft operator for all Honeywell mechanical product and system technical issues
• Attend daily operational meetings with the customer
• Provide AOG and on-wing support for both routine and emergency situations
• Create and manage technical cases, documenting communications within SFDC
• Ensure timely and effective communication with all stakeholders
• Attend quarterly technical and core team meetings to share insights and best practices
• Offer technical assistance for customer service hubs and line bases, including deployment from Columbus as required
• Monitor aircraft cancellations or delays attributed to Honeywell
• Conduct training sessions regarding Honeywell products and systems
• Monitor Honeywell product/system performance to facilitate proactive maintenance strategies
• Capture and share knowledge gained from issue resolution efforts
• Manage the escalation of technical and business issues as required
• Provide direct mechanical troubleshooting assistance to the customer via phone, email, and onsite, as necessary
• Possess substantial experience in Business and General Aviation (BGA)
• Collaborate with Business Units to provide input on the development and delivery of support requirements for products, systems, and services
• Exhibit strong time management skills and the ability to manage multiple priorities effectively using sound judgment
• Analyze technical issues and develop corrective action plans
• Establish yourself as the primary Honeywell contact for customers regarding product reliability and maintainability for in-service aircraft
• Provide regular updates (daily and weekly) on customer issues and relevant key metrics to leadership, fostering collaboration across internal functions to generate solutions
• Uphold a positive image of Honeywell while interacting effectively within established Management Operating Systems (MOS)
• Build and nurture relationships with assigned customers
• Support ATS on the network by responding to cases from customers
• Maintain a strong customer-centric mindset and proactively evaluate circumstances to drive resolution of issues
• Participate in weekly CCT/CBM meetings and quarterly review sessions with customers
• Take ownership of technical issues until closure
• Engage actively in technical expert teams and provide collaboration and coaching to peers based on your knowledge and expertise
• Participate in project teams related to products, technical matters, processes, and organizational initiatives
• Bring proven experience in mechanical engineering within the aviation or aerospace sector
• Demonstrate extensive experience in the maintenance and troubleshooting of mechanical products, including various APU models (36-100/150, RE100/220) and engines (HTF7000, HTF7350, HTF7700, HTF7500), as well as aircraft mechanical systems related to environmental control, cabin pressure, oil systems, bleed air, hydraulic systems, and more
• Occasional off-hours, weekend, and holiday work may be required to support customer operations
• Travel : up to 10% U.S

YOU MUST HAVE

• 6+ years of experience troubleshooting mechanical systems on business, commercial, and/or military aircraft
• Comprehensive knowledge of Honeywell mechanical products, including HTF Engines (HTF7000, HTF7350, HTF7700, HTF7500) and various APUs (RE220, 36-150, RE100), Forge/EEI, as well as related aircraft components and systems relevant to the assignment
• 7+ years of customer-facing support experience
• High School Diploma or GED

WE VALUE

• Bachelor’s degree in engineering or related technical field
• Experience or knowledge of Business General Aviation and Airline operations
• Airframe and Powerplant (A&P) license or equivalent
• Experience utilizing Accelerator tools to streamline work processes
• Ability to work independently with minimal supervision
• Clear thinking under stress and pressure with professionalism
• Strong written and verbal communication skills
• Proficiency in Microsoft Office (Excel, Word, PowerPoint, Outlook, Teams)
• Familiarity with Salesforce.com (SFDC), NICE InContact, and Team Center
• Strong decision-making capabilities under pressure, adaptability to change, and analytical skills
• Acumen in the aerospace business and the ability to consistently develop and improve processes
• Ability to proactively evaluate circumstances and drive resolution of issues
• Ability to develop and continuously improve processes

• JOB ID: req489632
• Category: Customer Experience
• Location: HON LOC NOT AVAIL IN STATE,Cleveland,Ohio,99999,United States
• Nonexempt
• Must be a US Person or able to obtain export Authorization.

• JOB ID: 1662
• Remote Eligibility: On-Site
• Travel Required: 0-10%
• Hourly/Salary: Salary
• Relocation Available: Yes