דרושים Maintenance Engineer Electrical ב-Honeywell ב-Thailand, Chao Phraya Surasak

Senior Quality Engineer Technician

Chonburi, Thailand

Provide Quality Control Inspection support for Honeywell [insert business group or function] while partnering with manufacturing teams and leaders. You will ensure that quality in being maintained in all factors involved in production. Responsible for all activities involving quality assurance and compliance with applicable regulatory requirements. Perform product inspection and/or audits of quality control programs.

• Perform inspections
• Test parts and raw material
• Monitor and verify quality
• Recommend improvements
• Conform to specifications
• Record observations
• Collaborate with others
• Generate reports
• Troubleshoot quality issues
• Set up and calibrate equipment

• High School Diploma or equivalent

• Experience in quality testing
• Effective written and verbal communication
• Proficient use in software programs such as Microsoft Office
• Some technical training or courses
• Good analytical and creative problem solving skill
• Ability to use tools and techniques to perform tests
• Ability to read technical data and specifications

• JOB ID: HRD261568
• Category: Integrated Supply Chain
• Location: 32 Moo 8 Srirachi, Chonburi Industrial Estate,Chonburi,BANGKOK,20110,Thailand
• Nonexempt

As a Project Engineer you will be part of a team assessing anddriving achievement of program specific performance within Honeywell byproviding overall Engineering and Technical support on existing and futureInstall projects.
Key Responsibilities:

• Act as a primary technical resource & customer support for assigned project(s)
• Interface between client, HW project team, and GES to ensure project is engineered correctly and delivered efficiently
• Review and ensure timely submission of project technical deliverables including system design, network design, and other Engineering related documents
• Plan, coordinate and document the Testing & commissioning of installed system including all necessary system acceptance by client
• Consultation regarding application of Honeywell’s products and technologies including value Engineering opportunities
• Provide technical support data for the Contracts, Sales, Project and Service teams and help negotiate technical issues at customer level

Key Experience & Capabilities:

• Engineering Degree/Diploma qualifications in Electrical Engineering/ Electronics & Telecommunication Engineering/ Instrumentation Engineering/ Mechanical Engineering
• 5 years work experience in a project’s environment, with extensive on-site exposure
• Proven background in Controls, Automation, Electronic Security, Smart Buildings, Digital Engineering and Integration is essential
• Chartered or Professional Engineer/Green Belt certification highly regarded
• Track record of delivery and success in technical solution design and in the areas of problem solving and process change/ improvement

• JOB ID: HRD264001
• Category: Engineering
• Location: 17 Changi Business Park Central 1,U01-01/09, #02-01/09, #03-01/09, #04-01/09 & #05-01/05,Singapore,SINGAPORE,486073,Singapore
• Exempt

Lead manufacturing Engineer Technician (Tooling Leader)

Bowin, Chonburi, Thailand

Make the Best You.

Tooling Leadercovering the end-to-end chemical engineering process.

• ·Read and interpret engineering drawings.

  ·Design and produce press tools, jigs, fixtures, and ensure their maintenance.

  ·Troubleshoot process issues while following standard operating procedures.

  ·Support engineers during experiments by adhering to work instructions.

  ·Assist in coining and trimming production, troubleshooting as necessary.

  ·Prepare spare parts for production support.

  ·Lead and participate in improvement projects as directed by supervisors.

  ·Plan and ensure quality in production activities.

  ·Develop designs for production improvement projects.

  ·Possess excellent troubleshooting skills specific to press operations.

  ·Understand part metrology and resolve dimensional issues for all running models.

  ·Set up new product tooling, validate, and suggest design improvements.

• ·Minimum 6 years of experience in a related field, particularly in tooling and die-making.
• ·At least 3 years of experience at the Tool Maker level.
• ·Technical training or a diploma in Tool & Die Making.

• Competency in drawing print reviews
• Proficient computer skills
• Understanding of manufacturing standards
• Good communication skills

• JOB ID: HRD262398
• Category: Integrated Supply Chain
• Location: 32 Moo 8 Srirachi, Chonburi Industrial Estate,Chonburi,BANGKOK,20110,Thailand
• Nonexempt

Key Responsibilities:

• Work closely with Project Managers, engineers, suppliers and customers to review design inputs, schedule planning, progress reporting and technical query resolution.
• Preparation of design documents such as SLDs for electrical networks and switchgear components, Bill of Materials, Functional Design Specifications, sizing calculations, GA drawings, cable schedules, earthing drawings.
• Develop sizing, specifications and selection of BESS and BOP Equipment
• Develop designs and detailed engineering of electrical networks for HV/MV/LV systems as per latest engineering standards.
• Create Energy Management System related documentation including Functional and Detail Design Specifications, Signal Lists, IP Address List, FAT and Commissioning Procedures
• Design the integration of Battery Management System, Unit Level Controllers, Energy Control System and SCADA applications.

Key Experience & Capabilities:

• Bachelor’s or master’s degree in electrical or Electronic Engineering from an accredited university.
• Professional Credentials (e.g. RPEQ or equivalent, NER, CPEng)
• Solar Accreditation Australia (SAA) for BESS design is advantageous.
• Minimum 10-year experience in power generation, renewable energy, energy storage or microgrid industry
• Experience delivering renewable energy systems, including Battery Energy Storage Systems (BESS) and photovoltaic (PV)

Key Challenges:

• Travel requirement up to 40% (nationally and/or internationally)
• Ability to meet deadlines whilst managing multiple tasks.

Discover More

For more information on how we process your information in the job application process, please refer to .

• JOB ID: req487585
• Category: Engineering
• Location: 45 Grosvenor Street,,Abbotsford,VICTORIA,3067,Australia
• Exempt

Key Responsibilities:

• Compile data for First Article Inspection (FAI) for Intergrated Heat Spreaders or PPAP for Thermal Interface Materials , collaborate with cross functional team to review the data, then create the FAI/PPAP report to submit customer(s). The data is comprising of:

• CU hardness

• FAI sample CMM, contour plot, IP template preparation, profile scan and 3D scan

• Cross section

• Packing & label condition

• Material incoming inspection

• Develop Visual Catalog / Acceptance Criteria for NPI product that consists of:

• Intergrated Heat Spreaders (IHS) - Critical defects in both top & cavity side such as flow mark, tool mark, machine mark, CER &TER, clip mark and scuff mark

• Thermal Interface Materials (TIM) – Critical defects including discoloration, incomplete cut in all product forms such as sheet, pad, continue roll, can and syringe

• Provide the report of CHN skew & cavity depth skew built

• Profile scan for top & cavity side of Intergrated Heat Spreaders (IHS)

• 3D scan for lip profile

• Customer complaint investigation in NPI products and provide 8D report
• Provide LAP data to support shipment in required product
• Prepare In-Process Template for die supplier (KTK) and Honeywell
• Issue SDR (supplier disposition request) when NPI product is OOC
• Write white paper (WP) to support change in Low Volume Manufacturing (LVM) products
• Provide NPI monthly report
• Upload Certificate of Compliance (CofC) onto customer MQCS portal or other customer portal
• Manage Non-conforming Product Report (NPR) of NPI product

MUST HAVE:

• Bachelor/Master Degree in in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Chemical Engineering or related technical field
• Demonstrated ability to drive quality improvement, demonstrated process orientation.
• ISO9001/TS16949 Auditor certified
• Six Sigma/Lean Green Belt/Black Belt Certification, Kaizen, 5s Preferred
• Strong statistical data analysis, able to use Minitab is preferred.
• Sufficient knowledge of FMEA, PPAP & APQP regarding ISO/TS 16949 requirement
• Adequate knowledge of inspection tools, measurement and calibration system are preferred
• Strong computer skills including MS office, AI ability is a plus
• Fluency in English – Business level, effective communication with both internal and external parties (Honeywell peers, customers, suppliers)

• JOB ID: HRD260082
• Category: Integrated Supply Chain
• Location: 32 Moo 8 Srirachi, Chonburi Industrial Estate,Chonburi,BANGKOK,20110,Thailand
• Exempt

Engineering and Maintenance Manageryour focus will be covering the end-to-end Maintenance Engineering process.

Equipment Maintenance: Perform regular maintenance, troubleshooting, and repairs on electrical systems of machinery to ensure compliance with local standards in Thailand.

Preventive Maintenance: Develop and implement preventive maintenance schedules to minimize equipment downtime and enhance reliability, particularly for electrical components.

Technical Support: Provide technical assistance and training to operational staff on the proper use and maintenance of electrical systems and machinery.

: Maintain accurate records of maintenance activities, including inspections, repairs, and modifications made on electrical systems, in accordance with regulatory requirements.

Safety Compliance: Ensure all maintenance activities adhere to safety regulations and standards, including those specific to electrical systems. Conduct risk assessments and implement corrective measures.

Must Have:

: A bachelor’s degree from Electrical Engineering.

: Minimum of 5 years of hands-on experience in the electrical field, particularly in machine maintenance and electrical system repair.

Electrical Failure Analysis: Proven experience in electrical failure analysis, including root cause investigation and troubleshooting faults effectively.

Technical Knowledge:Strong understanding of electrical systems, wiring diagrams, and circuit design, with the ability to read and interpret technical documentation.

Safety First

: Electrical Certificate from Engineering Institute of Thailand (Council of Engineers).

Tool Proficiency: Proficiency in using electrical testing and diagnostic tools, safety equipment, and maintenance software.

Problem-Solving Skills:Excellent analytical skills with the ability to diagnose electrical problems and implement effective solutions quickly.

• JOB ID: req478074
• Category: Facilities
• Location: 32 Moo 8 Srirachi, Chonburi Industrial Estate,Chonburi,BANGKOK,20110,Thailand
• Exempt

Key Responsibilities:

• Compile data for First Article Inspection (FAI) for Intergrated Heat Spreaders or PPAP for Thermal Interface Materials , collaborate with cross functional team to review the data, then create the FAI/PPAP report to submit customer(s). The data is comprising of:

• CU hardness

• FAI sample CMM, contour plot, IP template preparation, profile scan and 3D scan

• Cross section

• Packing & label condition

• Material incoming inspection

• Develop Visual Catalog / Acceptance Criteria for NPI product that consists of:

• Intergrated Heat Spreaders (IHS) - Critical defects in both top & cavity side such as flow mark, tool mark, machine mark, CER &TER, clip mark and scuff mark

• Thermal Interface Materials (TIM) – Critical defects including discoloration, incomplete cut in all product forms such as sheet, pad, continue roll, can and syringe

• Provide the report of CHN skew & cavity depth skew built

• Profile scan for top & cavity side of Intergrated Heat Spreaders (IHS)

• 3D scan for lip profile

• Customer complaint investigation in NPI products and provide 8D report
• Provide LAP data to support shipment in required product
• Prepare In-Process Template for die supplier (KTK) and Honeywell
• Issue SDR (supplier disposition request) when NPI product is OOC
• Write white paper (WP) to support change in Low Volume Manufacturing (LVM) products
• Provide NPI monthly report
• Upload Certificate of Compliance (CofC) onto customer MQCS portal or other customer portal
• Manage Non-conforming Product Report (NPR) of NPI product

MUST HAVE:

• Bachelor/Master Degree in in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Chemical Engineering or related technical field
• Demonstrated ability to drive quality improvement, demonstrated process orientation.
• ISO9001/TS16949 Auditor certified
• Six Sigma/Lean Green Belt/Black Belt Certification, Kaizen, 5s Preferred
• Strong statistical data analysis, able to use Minitab is preferred.
• Sufficient knowledge of FMEA, PPAP & APQP regarding ISO/TS 16949 requirement
• Adequate knowledge of inspection tools, measurement and calibration system are preferred
• Strong computer skills including MS office, AI ability is a plus
• Fluency in English – Business level, effective communication with both internal and external parties (Honeywell peers, customers, suppliers)

• JOB ID: HRD260082
• Category: Integrated Supply Chain
• Location: 32 Moo 8 Srirachi, Chonburi Industrial Estate,Chonburi,BANGKOK,20110,Thailand
• Exempt