דרושים Materials Handler M-f - Pm Mst ב-Ge Healthcare ב-United States, Salt Lake City

• Set up and running of data acquisition equipment for tests
• Reporting/documenting results of tests and measures
Essential Responsibilities

• Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.

• Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.

• Perform electrical calibration on production/refurb systems and subassemblies.

• Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.

• Execute training plans.

• Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.

• Interpret circuit board schematics/system interconnect diagrams.

• Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.

• Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.

• Provide strong individual contributions to team goals.

• Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.

• Comply with EHS regulations and policies and escalate concerns/suggestions to leadership.

• Maintain daily production output.

• Identify and report defects in assigned area.

• Engage in daily 5s activities.

Required Qualifications

• Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.

• Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques

• Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process

• Must be able to physically lift (floor to waist, waist to crown level, and horizontally)

• Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)

• Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday

• Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday

• Must be able to frequently stoop, bend, squat and kneel throughout the workday

• Must be able to stand/sit continuously throughout the day

• Must be able to ascend/descend/balance occasionally on portable step stools

Desired Characteristics

• Bachelor’s degree in manufacturing, Engineering or Technology related fields.

• Experience in medical manufacturing or other highly regulated industry preferred.

Executes the receiving, storing, staging and distribution of materials required for assembly/manufacturing of product.
Job Description

While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.

This role is for 3rd shift, 11:00 PM - 7:30 AM EST.

Responsibilities

• Performs manufacturing and maintenance work from detailed work instructions and operational method sheets.

• Maintains daily production output with accurate records of the work performed and other records as may be required by management.

• Make limited decisions within the confines of quality and safety approved procedures, with guidance.

• Mainly performing production work and may be dependent upon others for non-standard work. Flexibility and adaptability expected.

• Complies with all EHS, Training and Quality procedures and policies

• Perform routine troubleshooting of process or equipment. Brings equipment irregularities to the attention of the supervisor.

• Use Lean tools to improve established processes and metrics in daily work. Participates in Action Workouts and Kaizen events.

• Make acquired skills or knowledge available to others; train others on manufacturing processes.

• Willing to cross-training in other areas of manufacturing process to assist in site goals.

• All other duties as assigned.

Required Qualifications

• Associates degree in Applied Sciences (or local equivalent 2 year degree)ORa High School diploma (or local equivalent)and2 years technical experience in relevant industry.

• Proficiency to understand and interpret basic written technical information.

• Demonstrated ability to work well with general direction and information.

• Demonstrated proficiency to utilize computerized work

• Effective verbal and written communication skills with teammates, management, and across functions.

• Being able to sit and/or stand for long periods of time.

• Ability to work in a clean room environment including wearing the required PPE for long periods of time.

Preferred Qualifications

• Knowledge of semiconductor manufacturing process and/or thin film deposition.

• Experience with vacuum systems, compressed gases, RF power, PLC & computer systems strongly preferred

• Demonstrated experience working in quality-controlled environment, specifically FDA-regulated medical product manufacturing or another relevant environment.

• Demonstrated strong problem-solving / equipment troubleshooting skills.

• Mechanical, facilities and/or maintenance experience.

• Experience working in a cleanroom environment.

• Lean / Six Sigma experience.

We will not sponsor individuals for employment visas, now or in the future, for this job opening.

The Production Maintenance Technician would provide daily process support, troubleshooting, preventative maintenance, and repair of flat panel The Production Maintenance Technician would provide daily process support, troubleshooting, preventative maintenance, and repair of flat panel manufacturing equipment. The GE Healthcare facility located in North Greenbush, NY is a 230,000 sf facility built for the manufacturing of Digital X-ray detectors. The facility houses 60,000 sf of cleanroom environments built for high tech manufacturing. The process equipment consists of High Vacuum Equipment, Photolithography Equipment, Wet Chemistry Processing, Electrical Testing Equipment, and Chemical Plating Equipment. The position will have daily responsibilities for equipment preventative maintenance, repair of processing equipment, and continuous equipment optimization.
Responsibilities

• Responsible for the daily preventative maintenance, troubleshooting, repair, and optimization of manufacturing equipment. Processing equipment includes Wet etching, Dry etching, and Photolithography, PVD, PECVD, and Chemical plating processes.

• Perform support for tracking/trending of the systems for control and increased system uptime.

• Troubleshooting electronics on process equipment.

• Perform trouble shooting, program reloading, and minor PLC or HMI programing for various type controllers and interfaces.

• Perform repair and maintenance on system robotics.

• Process knowledge of high vacuum processing equipment, to be able to troubleshoot, repairs, and optimize uptime.

• Maintain complete and accurate records of all work and provide data for formal reports (oral and written) as required.

• Develop SOPs, work instructions, and execute training plans as required.

• Use judgment to determine proper troubleshooting steps or improvement to processes.

• Collaborate with other departments in the planning & execution of duties to ensure the orderly flow of material and information.

• Adjust variables as directed, take specified data, and bring equipment irregularities to the attention of the supervisor. Make a variety of specified measurements and manipulations with skill.

• From detailed instructions, set up or modify equipment, calibrate and operate equipment.

• May participate in quality control inspections.

• Work with Facilities Manager, engineers, supervisors, and other managers to improve quality and process efficiency.

• Understand and execute LO/TO principles.

• Comply with all EHS and Quality procedures and policies.

Required Qualifications

• Associate Degree in Applied Science field plus 3 years or more of related experience; or any Associate Degree plus 4 years or more of related experience; or a Bachelor of Science degree in Applied Sciences field; OR High School Diploma/GED plus 5 years or more of related experience OR equivalent overall related experience and/or education in lieu of specific degrees.

• Demonstrated project management & project execution skills.

• Demonstrated ability to easily shift from one activity to another.

• Demonstrated motivation to meet manufacturing outputs and continuously improve processes.

• Demonstrated ability to work well with limited direction and information.

• Proficiency to understand and interpret basic written technical information.

• Demonstrated proficiency to utilize computerized work systems.

• Effective verbal and written communication skills. Ability to communicate using English.

• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening

Desired Qualifications

• Bachelor’s degree in Engineering or closely related field Familiarity and experience with Environmental Health and Safety regulations and procedures.

• Demonstrated knowledge of electronics, PLCs, HMIs, and Robotics. Demonstrate knowledge of flat panel manufacturing or semi-conductor processing equipment.

Customer facing staff responsible for winning business Operates with some autonomy but are typically subject to standard sales practices and procedures. The role is subject to regular review of sales results. Some judgment may be required but this is typically with guidance. May be responsible for medium-sized sales territories.

角色与职责

• 向合作伙伴和分销商销售或通过其进行销售。可能包括渠道销售支持和渠道开发职责。
• 对销售区域、产品线、市场、销售流程或客户群有深入的了解。利用先前的经验和获得的商业专业知识来执行政策/策略。
• 深入理解关键业务驱动力；用这种理解来完成自己的工作。深入了解自己团队的工作如何与其他团队融合并为该领域做出贡献。
• 大多数决策都在规定的框架内，但是对于项目、产品线、市场、销售过程或客户的最终决策具有一定的自主权。利用先前的经验和在职培训来解决简单的任务。拥有解决问题所需的技术技能和分析思维。可以使用自己团队以外的多个内部资源来做出决定。
• 此级别的职位可能由个人贡献者担任，且其具有成熟的人际交往能力。向直接相关的同事和业务部门传达所提供的设计和协调服务。为新团队成员提供非正式指导。在简单的情况下向其他人解释复杂的信息。

基本资格

• 该岗位要求在领域具有较丰富的工作经验。学力水平相当于从正规高等院校取得学士学位 （或根据相应工作经验具有高中学历）

所需特性

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Coordinate and expedite the flow of materials (from suppliers and also within departments) according to production schedules. Plan and schedule material/production needs. Proficient professional, contributes to projects and initiatives, influences at the site level and determines and executes to operational standards and processes, and requires understanding of a concepts, methods and procedures.
Essential Responsibilities

• Responsible for material ordering, availability, and scheduling targeting 2-week inventory levels, at a minimum
• Oracle expert
• Ensure systemic accuracy of inventory.
• Rescheduling materials for pull ins (expedites) and push outs (for inventory control)
• Daily Shortage root cause investigation and resolution
• Partner closely with suppliers focusing on: Packaging needs, min/max planning. PCNs, as they relate to old/existing parts, materials replenishment planning, root-cause problem solving.
• Conduct daily walks on the floor and the receiving dock to investigate and resolve material issue.
• Support material transfers, supplier reviews w/Sourcing
• Field Modification Instruction, as appropriate - ordering material, formulating schedules.
• Supplier visits, as needed - internal and external.
• Manage Phase In / Phase Out (NPI) to minimize obsolete material.
• Provide supply analysis data and recommendations as necessary.
• Assist in cycle count efforts as determined.
• Support tool development for prediction of material issues

1. Bachelor's degree from an accredited university or college

2. Computer proficiency

3. Working knowledge of MRP

4. Excellent Interpersonal Skills

5. Strong problem-solving skills

Desired Characteristics

1. APICS Certification

2. Oracle knowledge and experience

3. Six Sigma Green Belt

4. Two years of Experience in a material replenishment or material planning role

• Support all lean activities, initiatives, and action workouts.
• Manage and ensure RTV and NC material disposition.

Executes the receiving, inspection, disposition, storing, using, staging and distribution of materials required for assembly/manufacturing of product.
Essential Responsibilities

• Performs root cause analysis, make recommendations and document non-conforming materials.

• Perform physical movement of materials from one area to another using handcarts or forklifts.

• Physically and systemically receive/issue individual material requisitions from internal and external departments

• Quantifies and verifies cycle count.

• Process material against purchase orders and work orders using electronic material management system.

• Coordinate with on-site and/or off-site warehousing facilities for parts replenishment and material for storage.

• Work with appropriate logistics and production personnel to resolve/prevent part shortages.

• Maintains/reviews critical documentation necessary for recording, allocating and dispersing a variety of regulated materials.

• Perform cycle audits and physical inventory per schedule.

• Help reconcile inventory discrepancies and report discrepancies to Supervisor.

• May assist in training new hires.

• Comply with EHS & Quality System regulations and policies.

• Read and follow work instructions and bills of materials.

• Perform other duties and/or special projects as assigned.

Qualifications

• High school Diploma/GED or local equivalent.

• Demonstrate ability to read, write and speak in local language.

• Proficient in basic mathematics.

• Proficient in basic mathematics.

• Ability to communicate well and work with others.

• Basic computer skills.

• Ability to consistently lift.

• Must be able to lift (floor to waist, waist to crown level, and horizontally).

• Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance)

• Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion throughout the workday.

• Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday.

• Must be able to stoop, bend and squat frequently throughout the workday.

• Must be able to stand/walk continuously throughout the day

• Must be able to ascend/descend/balancefrequently on portable stairs for small parts retrieval.

• Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Desired Characteristics

• Minimum 2 years’ experience in storing and material handling

• Previous receiving and inspection experience

• Oracle or SAP experience.

• Knowledge of computerized material flow methods.

• Basic knowledge of quality and inventory control.

• Knowledge of root cause analysis methods.

• Prior experience using a forklift and weight scales.