דרושים Power Equipment Test Engineer ב-Flex ב-ארהב

USA, Fontana Ca.

Reporting to thewill complete electrical testing of products during the manufacturing process based on established testing procedures.

What a typical day looks like:

• Follow AC/DC schematics and wiring diagrams to do testing of main electrical distribution AC/DC systems
• Perform testing on various systems including HVAC system, lighting, receptacles, fans, fire alarm systems, battery system, and meggering of cables
• Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work
• Be able to troubleshoot assembly, wiring and testing problems
• Drafts detailed technical reports to present findings; based on findings, recommends modifications needed to correct production problems
• Perform other related duties as assigned

The experience we’re looking to add to our team:

• High school diploma or equivalent; associate’s degree in electrical engineering or related field preferred.
• 2+ years’ experience in electrical testing or related field
• Knowledge in testing of three phase AC and DC control circuits.
• Good working knowledge of standard electrical testing and measuring equipment
• Knowledge of Electrical Safety Procedures and NEC Codes
• Excellent verbal and written communication skills with the ability to discuss product flaws in a constructive and positive manner.
• Excellent interpersonal skills.
• Excellent organizational skills and attention to detail.
• Strong analytical and problem-solving skills.
• Proficient with Microsoft Office Suite or related software to prepare test reports and proposals.

What the physical requirements are:

• Standing, walking, and sitting at a desk using a computer
• Must be able to lift up to 30 pounds at a time
• Must be able to traverse production facility to complete testing
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to the

What a typical day looks like:

• Oversees the work of assigned team employees.
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor.
• Assists with the planning and preparation of training for new team members.
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience.
• Assists team members with technical issues or advanced problems with given assignments
• Partners with supervisor or engineering manager to resolve any issues that arise within department.
• Monitors testing status daily; gathers feedback from all test technicians.
• Follow AC/DC schematics and wiring diagrams to perform testing of main electrical distribution AC/DC systems for power distribution control houses and panels.
• Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work
• Be able to troubleshoot assembly, wiring and testing problems
• Performs full functional testing on various circuits including HVAC system, lighting, receptacles, fans, fire alarm systems, battery system, and meggering of cables.
• Perform complete testing including current/voltage injections, Hi-Potential Testing, I/O checks and circuit breaker simulation testing on Relay Panels and Switchgear.
• Perform Factory Acceptance Testing with customer as required.
• Perform customer site visits to troubleshoot and resolve any field issues that may arise.
• Drafts detailed technical reports to present findings; based on findings, recommends modifications needed to correct production problems
• Perform other related duties as assigned

The experience we’re looking to add to our team:

• High school diploma or equivalent; associate’s degree in electrical engineering or related field required. Bachelor's degree in related field preferred.
• At least 4 years of experience in power distribution electrical testing or related field
• Relevant experience leading a team.
• Ability to read and interpret wiring diagrams, schematics, and single line diagrams.
• Knowledge in testing of three phase AC and DC control circuits.
• Knowledge in testing protection relays and switchgear.
• Knowledge of power distribution, breakers, current and potential transformers, protection relays, and switchgear.
• Familiar with protection relay software such as Schweitzer, AcSELerator and GE Enervista UR.
• Good working knowledge of standard electrical testing and measuring equipment
• Knowledge of Electrical Safety Procedures and NEC Codes
• Excellent verbal and written communication skills with the ability to discuss product flaws in a constructive and positive manner.
• Excellent interpersonal skills.
• Excellent organizational skills and attention to detail.
• Strong analytical and problem-solving skills.
• Proficient with Microsoft Office Suite or related software to prepare test reports and proposals.

What the physical requirements are:

• Periods of standing, walking, and sitting at a desk using a computer
• Must be able to lift up to 30 pounds at a time
• Must be able to traverse production facility to complete testing
• Ability to travel to customer sites when necessary.
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add alocated inAustin, TX.

Reporting to the Quality Manager, thewill be responsible for maintaining quality engineering programs, standards and improvements during product development.

What a typical day looks like:

• Control the products qualities during product development to meet customers specified standards.
• Develops and initiates standards and methods for inspection, testing and evaluation.
• Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability.
• Compiles and writes training material and conducts training sessions on quality control activities.
• Supports Design Engineers and Quality Manager with customer interfaces as necessary on quality related issues.
• Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• Initiates corrective action requests as needed and tracks to satisfactory completion.
• Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• Analyzes reports and returned products and recommends corrective action.
• Support product, process and equipment qualifications.

The experience we’re looking to add to our team:

• Typically requires a bachelor’s degree in engineering or equivalent experience and training.
• 6 years of experience working as a validation engineer.
• Medical Devices experience / ISO13485.
• Experience working in a 24/7 operation.
• Experience working within regulated environments and with Regulatory protocols.

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

Process Engineerlocated inSLC, UT.

Reporting to the Process Engineer Manager ; the potential Process Engineer would be responsible for process-engineering capabilities focused on cost, quality and delivery improvements in order to hold up a manufacturing organization.

What a typical day looks like:

• Recognize the manufacturing process, technologies, techniques and the product.
• Define, implement and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable and reproducible process parameters.
• Trouble shoot process related issues and help to develop, implement and take ownership of process control methodologies.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and through put.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation and review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during new technology transfer.
• Provide equipment maintenance, repair hold up as required and guide costimprovement/reductionprograms.

Education / Experience

Typically requires a Bachelor’s Degree in related field or equivalent experience and training.

Knowledge / Skills / Abilities

Use of the following tools may be required: Electronic Assembly: color code, component, and schematics. May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.

Decision Making / Discretion

Limited decision-making opportunities or responsibilities; makes guided or scenario-based decisions requiring management approval.

Supervision / Leadership

Closely supervised, normally receives detailed instructions on all work.

Work Environment:

While performing the duties of this job, the employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to moving mechanical parts.

Physical Demands:

While performing the duties of this job, the employee is frequently required to talk and hear. The employee is occasionally required to stand, walk, sit, handle small components and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and depth perception.

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

located in

Reporting to thetheQuality Engineerthis role will maintain quality engineering programs, standards and improvements within the organization.

Here is a glimpse of what you’ll do:

• Develops and initiates standards and methods for inspection, testing and evaluation.
• Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
• Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost.
• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability.
• Compiles and writes training material and conducts training sessions on quality control activities.
• Kaizen, 5S, Value Stream Mapping
• First Article Inspection (FAI) and PPAP documentation
• Metrology tools (calipers, micrometers, CMMs)
• GD&T (Geometric Dimensioning and Tolerancing)
• Holds up Product Engineers and Quality Program Managers with customer interfaces as necessary on quality related issues.
• Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• Initiates corrective action requests as needed and tracks to satisfactory completion.
• Assists with development and implementation of quality audits.
• In charge of developing, applying, revising and maintaining quality standards for processing materials into partially finished or finished products.
• Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• Explores reports and returned products and recommends corrective action.
• Establishes program to evaluate precision and accuracy of production equipment and testing, measurement and research of equipment and facilities.
• Approves product, process and equipment qualifications.
• Provides liaison to various regulatory bodies.

Here is some of what you’ll need:

• Bachelor's degree or equivalent work experience
• 4 years of experience as a Planner Scheduler or similar roles
• Engineering in the high technology electronics industry
• Experience Water Cool System preferred
• Experience with SMT Systems / ISO 9001
• Lean Six Sigma principles
• Statistical Process Control (SPC)
• Proficiency in Excel (pivot tables, charts, formulas)
• Production Planning/scheduling, and DOF (Direct Order Fulfillment)
• Previous experience in the Electronic Manufacturing or Shipping industry
• Advance Skills in Micro Soft Office Suite / Excel / PowerPoint /
• Learn new tools/software quickly and work/multi-task under pressure
• Excellent verbal, written and interpersonal communication skills.

• Enterprise Resource Planning / Manufacturing Execution Systems / Advanced
• Planning and Scheduling Systems / programming / Value Stream mapping / Business Process mapping

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

located inAustin, TX

Reporting to the

What a typical day looks like:

• MUST HAVE EXPERIENCE WITH Keysight 3070 In-Circuit Test applications.
• Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, telemeter and record test data.
• Determines conditions under which tests are to be conducted and sequences and phases of test operations.
• Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
• Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
• Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem-solving techniques.
• Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements

The experience we’re looking to add to our team:

• 5+ years of related experience
• ICT Keysight 3070 (or similar) support experience
• Must have experience with Boundary scan (IEEE 1149)
• Bachelor’s degree in Electrical Engineer , Computer Science, or related field
• Python, Perlscripting experience(preferred)

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

The “” will be based inL reporting the
Facilities Manager.

Mechanical: Repairs and maintains machinery and mechanical equipment such as conveyor systems and production machines and equipment.

Electrical: Maintains and repairs manufacturing equipment to ensure it is operational.

Responsibilities:

• Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism.
• Repairs the failure mechanism in the most cost-effective manner.
• Performs preventive maintenance at specified intervals and schedules.
• Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
• Assists process technicians and engineers with the installation and removal of process equipment.
• Records times and problems in equipment logs.
• Provides daily equipment functioning activity information.
• Disassembles instruments and equipment and inspects components for defects.
• Aligns, repairs, replaces, and balances component parts and circuitry.
• Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment.
• May require travel to other Flex sites or equipment vendors' locations.
• Highest level may perform both software and hardware maintenance.

Qualifications:

• Typically requires an associate degree in related field, military technical training or equivalent education and training.
• Typically requires 7 years of related experience.

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement