דרושים Structural Paint Lead ב-Flex ב-United States, Fontana

USA, Fontana Ca.

Reporting to the

What a typical day looks like:

• Oversees the work of assigned team employees.
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor.
• Assists with the planning and preparation of training for new team members.
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience.
• Assists team members with technical issues or advanced problems with given assignments
• Partners with supervisor or engineering manager to resolve any issues that arise within department.
• Monitors testing status daily; gathers feedback from all test technicians.
• Follow AC/DC schematics and wiring diagrams to perform testing of main electrical distribution AC/DC systems for power distribution control houses and panels.
• Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work
• Be able to troubleshoot assembly, wiring and testing problems
• Performs full functional testing on various circuits including HVAC system, lighting, receptacles, fans, fire alarm systems, battery system, and meggering of cables.
• Perform complete testing including current/voltage injections, Hi-Potential Testing, I/O checks and circuit breaker simulation testing on Relay Panels and Switchgear.
• Perform Factory Acceptance Testing with customer as required.
• Perform customer site visits to troubleshoot and resolve any field issues that may arise.
• Drafts detailed technical reports to present findings; based on findings, recommends modifications needed to correct production problems
• Perform other related duties as assigned

The experience we’re looking to add to our team:

• High school diploma or equivalent; associate’s degree in electrical engineering or related field required. Bachelor's degree in related field preferred.
• At least 4 years of experience in power distribution electrical testing or related field
• Relevant experience leading a team.
• Ability to read and interpret wiring diagrams, schematics, and single line diagrams.
• Knowledge in testing of three phase AC and DC control circuits.
• Knowledge in testing protection relays and switchgear.
• Knowledge of power distribution, breakers, current and potential transformers, protection relays, and switchgear.
• Familiar with protection relay software such as Schweitzer, AcSELerator and GE Enervista UR.
• Good working knowledge of standard electrical testing and measuring equipment
• Knowledge of Electrical Safety Procedures and NEC Codes
• Excellent verbal and written communication skills with the ability to discuss product flaws in a constructive and positive manner.
• Excellent interpersonal skills.
• Excellent organizational skills and attention to detail.
• Strong analytical and problem-solving skills.
• Proficient with Microsoft Office Suite or related software to prepare test reports and proposals.

What the physical requirements are:

• Periods of standing, walking, and sitting at a desk using a computer
• Must be able to lift up to 30 pounds at a time
• Must be able to traverse production facility to complete testing
• Ability to travel to customer sites when necessary.
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to the

What a typical day looks like:

• Oversees the work of assigned team employees
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor
• Assists with the planning and preparation of training and orientation for new team members in partnership with the training specialist and team trainer
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience
• Assists team members with technical issues or advanced problems with given assignments
• Inspects work performed by team members
• Tracks and logs workers time, materials, and other resources used for inventory purposes.
• Partner with supervisor or production manager to resolve any issues that arise within department.
• Maintain a clean and safe work area
• Complete assemblies and sub-assemblies for manufacturing projects, as needed
• Perform all other duties as assigned

The experience we’re looking to add to our team:

• High School Diploma or equivalent
• At least 4 years of experience in manufacturing, fabrication, or related field
• Prior experience in effectively leading a team of employees
• Excellent analytical and problem-solving skills.
• Ability to prioritize tasks and to delegate them when appropriate.
• Strong attention to detail and ability to perform work accurately
• Knowledge of manufacturing, equipment maintenance, and safety management
• Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams
• Basic math skills to meet technical specifications and measurements
• Basic understanding of tools (ex. Tape measure, impact drill, etc.)

What the physical requirements are:

• Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
• Must be able to lift, push, pull up to 35 pounds at a time.
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to theis responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products.

What a typical day looks like:

• Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications
• Uses observation and testing to identify faults in materials and manufacturing process
• Documents inspection results by completing inspection reports, logs, and checklists
• Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products
• Maintain quality records as needed
• Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary.
• Perform other related duties as assigned

The experience we’re looking to add to our team:

• High school diploma or equivalent
• 1-3 years’ experience of quality inspections in afabrication/manufacturingenvironment.
• Previous experience in an ISO 9001 Certified company
• Thorough understanding of the product and/or process being inspected
• Ability to read blueprints, specifications, and technical documents
• Excellent written and verbal communication skills
• Ability to handle multiple projects while maintaining attention to detail with the task at hand
• Proficient in Microsoft Office Suite or related software as needed to complete reports.

What the physical requirements are:

• Prolonged periods standing and performing repetitive tasks.
• Must be able to lift up to 35 pounds at times.
• Dexterity and accuracy as needed to operate testing equipment or gauges.
• Must be able to bend, stretch, kneel, and squat to perform inspections
• Must be able to traverse production facility to conduct inspections
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to the

What a typical day looks like:

• Oversees the work of assigned team employees
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor
• Assists with the planning and preparation of training and orientation for new team members in partnership with the training specialist and team trainer
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience
• Assists team members with technical issues or advanced problems with given assignments
• Inspects work performed by team members
• Tracks and logs workers time, materials, and other resources used for inventory purposes.
• Partner with supervisor or production manager to resolve any issues that arise within department.
• Maintain a clean and safe work area
• Complete assemblies and sub-assemblies for manufacturing projects as needed
• Perform all other duties as assigned

The experience we’re looking to add to our team:

• High School Diploma or equivalent
• At least 4 years of experience in manufacturing, fabrication, or related field
• Prior experience in effectively leading a team of employees
• Excellent analytical and problem-solving skills.
• Ability to prioritize tasks and to delegate them when appropriate.
• Strong attention to detail and ability to perform work accurately
• Knowledge of manufacturing, equipment maintenance, and safety management
• Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams
• Basic math skills to meet technical specifications and measurements
• Basic understanding of tools (ex. Tape measure, impact drill, etc.)

What the physical requirements are:

• Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
• Must be able to lift, push, pull up to 35 pounds at a time.
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to theis responsible for painting metal bases, steel tube frames, and steel c-channels for our enclosure buildings.

What a typical day looks like:

• Applies paint, stains, varnishes, enamels, and other coatings to metal and steel surfaces with brushes, rollers, or other tools
• Prepares surfaces for painting: fills cracks, holes, and joints with caulk, putty, plaster, or other fillers using caulking guns or putty knives; smooth surfaces using sandpaper, scrapers, brushes, steel wool, or sanding machines
• Applies primers or seals to prepare new surfaces, such as bare wood or metal, finish coats
• Covers surfaces with drop clothes or masking tape and paper to protect surfaces during painting
• Read work orders and blueprints to determine work requirements
• Calculates amounts of required materials and estimate costs, based on surface measurements and/or work orders
• Maintains a clean work area
• Performs other related duties as assigned

The experience we’re looking to add to our team:

• High School Diploma or equivalent
• 0-2 years of previous experience in a related field
• Excellent knowledge of painting material and how to select, mix, and apply them
• Solid knowledge of painting techniques and the use of appropriate tools (brushes, rollers, caulking guns, etc.)
• Strong attention to detail skills
• Excellent communication skills
• Ability to follow instructions and provide consistent work.

What the physical requirements are:

• Prolonged periods of standing and painting.
• Must have adequate balance and ability to climb ladders and scaffolding.
• Must be able to lift up to 35 pounds at times.
• Must be able to distinguish among colors.
• Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

USA, Fontana Ca.

Reporting to the

What a typical day looks like:

• Oversees the work of assigned team employees
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor
• Assists with the planning and preparation of training and orientation for new team members in partnership with the training specialist and team trainer
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience
• Assists team members with technical issues or advanced problems with given assignments
• Inspects work performed by team members
• Tracks and logs workers time, materials, and other resources used for inventory purposes.
• Partner with supervisor or production manager to resolve any issues that arise within department.
• Maintain a clean and safe work area
• Complete assemblies and sub-assemblies for manufacturing projects as needed
• Perform all other duties as assigned

The experience we’re looking to add to our team:

• High School Diploma or equivalent
• At least 4 years of experience in manufacturing, fabrication, or related field
• Prior experience in effectively leading a team of employees
• Excellent analytical and problem-solving skills.
• Ability to prioritize tasks and to delegate them when appropriate.
• Strong attention to detail and ability to perform work accurately
• Knowledge of manufacturing, equipment maintenance, and safety management
• Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and engineering diagrams
• Basic math skills to meet technical specifications and measurements
• Basic understanding of tools (ex. Tape measure, impact drill, etc.)

What the physical requirements are:

• Prolonged periods of standing, bending, kneeling, and performing repetitive tasks.
• Must be able to lift, push, pull up to 35 pounds at a time.
• Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement

What a typical day looks like:

• Oversees the work of assigned team employees.
• Addresses minor discipline problems with team members; refers more serious cases to the supervisor.
• Assists with the planning and preparation of training and orientation for new team members in partnership with the training specialist and team trainer.
• Collaborates with team members to discuss upcoming work assignments; delegates assignments based on team members skills and experience.
• Assists team members with technical issues or advanced problems with given assignments.
• Inspects work performed by team members; ensures it meets specifications of blueprints.
• Tracks and logs workers time, materials, and other resources used for inventory purposes.
• Partner with supervisor or production manager to resolve any issues that arise within department.
• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Performs welding on material, as needed.
• Assists with the layout, positioning, alignment, and securing parts prior to fabrication.
• Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques.
• Maintains, organizes, and cleans equipment and the work area.
• Complete all other duties as assigned.

The experience we’re looking to add to our team:

• High School Diploma or equivalent
• At least 4 years’ experience in various welding processes (MIG, FCAW, SMAW, TIG, etc.)
• Prior experience in effectively leading a team of employees
• Certification required: AWS D1.1 FCAW (Flux Core Arc Welding)
• Thorough understanding of welding processes including Flux Core Arc Welding (FCAW) and Gas Metal Arc Welding (GMAW)
• Excellent analytical and problem-solving skills.
• Ability to prioritize tasks and to delegate them when appropriate.
• Strong attention to detail and ability to perform work accurately.
• Knowledge of manufacturing, equipment maintenance, and safety management
• Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and drawings including weld symbols.
• Basic math skills to meet technical specifications and measurements.
• Thorough understanding of machines and tools used in welding techniques including designs, uses, maintenance, and repair.
• Ability to demonstrate proficiency in various welding techniques.
• Ability to read a tape measure.
• Ability to make jigs and setups
• Overhead crane operation a plus

What you'll receive for the great work you provide:

• Full range of medical, dental, and vision plans
• Life Insurance
• Short-term and Long-term Disability
• Matching 401(k) Contributions
• Vacation and Paid Sick Time
• Tuition Reimbursement