דרושים Senior Test Engineer-2 ב-Flex ב-China, Dongguan

:

• Supervised and Lead Test Engineering Team
• 管理和领导项目测试团队
• Collaborate with Customer
• 与客户合作
• Training TE Engineer on design circuitry and failure analysis skill
• 培训测试工程师电路分析和失效分析技能
• Setup Test equipment & stations
• 设立测试设备和工位
• Review DFM requirements
• 检查生产所需设计的要求
• Set up ATE test program
• 建立ATE测试项目
• Prepare & Review Cpk, GR&R, GoNoGo, SOP Report
• 准备与检查Cpk, GR&R, GoNoGo, SOP报告
• Test Automation review & approve DFM, FAT & SAT, IQC & OQC related documents
• 测试自动化检查与审批DFM, FAT & SAT, IQC 与OQC相关文件
• Collaborate with respective supplier on test design concept
• 与相关供应商合作构建测试设计概念
• Support EE on providing the 1st level FA for failure units.
• 支持设备部提供第一层失效分析
• Support EE on DOEs & FA actions required
• 支持设备部DOE与FA行动所需
• Troubleshoot system applications on customer's request
• 根据客户寻找系统应用故障
• Resolve engineering issues regarding systems application
• 解决系统应用相关德工程问题
• Conduct regular follow up on customer's system level activities
• 跟进执行客户系统应用相关事项

:

• Associate's degree or above
• 大专以上学历
• 5+ years‘ power or PCBA experience in test maintenance/product testing/ failure analysis
• 5年以上电源或电子组装行业测试维护，产品测试，失效分析经验
• Capability of handling foreign customers
• 有与外国客户处理问题的能力
• Can read and write in English
• 具备英文读写能力

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please emailand we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

The “” will be based in Dongguan.

Responsibilities:

• Primary Responsibility
• 1) Develops and initiates standards and methods for inspection, testing and evaluation.
• 2) Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality data.
• 3) Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
• 4) Compiles and writes training material and conducts training sessions on quality control activities.
• 5) Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• 6) Initiates corrective action requests as needed and tracks to satisfactory completion.
• 7) Assists with development and implementation of quality audits.
• 8) Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• 9) Analyzes reports for returned products and recommends corrective action. 10) Approves product, process and equipment qualifications.
• 11) Drives end to end process yield improvement.
• 3.2 Secondary Responsibility
• 1) Assist QA manager in improve quality management level and customer satisfaction.
• 2) Collect enough source information ofsuppliers/customers/equipment/engineeringetc.
• 3) Any other duties assigned as and when.

Qualifications:

• 4.1 Education Qualification
• 1) Bachelor’s degree in Electronics, Mechanical, Mechatronic, or Other Related Flied engineering.
• 2) High Education Diploma in Electronics, Mechanical, Mechatronic or Other Related Flied engineering.
• 4.2 Knowledge & Skills
• 1) Demonstrates advanced functional and technical skills and basic process skills. Typically requires skill and troubleshooting, and diagnostics, and overview of the entire test process and the ability to train others.
• 2) Ability to read, analyze and interpret common scientific and technical journals. Ability to write reports, business correspondence and procedure manuals. Ability to effectively communicate with managers and employees of the organizations.
• 3) Reasoning Ability: to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
• 4) Prefer to have a certification of CQE, CQT, or CQM.
• 4.3 Personal Attributes
• 1) Intelligent, self-confidence, full of responsibilities.
• 2) Strong leadership and ability to harmony.
• 3) Self-motivated and the ability to direct energy and achieve assigned mission satisfactorily.
• 4) Can make progress gradually, self-examine.
• 4.4 Experience
• 1) 3 years engineering experience in related field; or 2 to 4 years quality engineering experience and/or training; Must be computer literate.
• 2) Experience in Power supplier or PCBA related industry is preferred.

Required Skills:

Optional Skills:

:

• Supervised and Lead Test Engineering Team
• 管理和领导项目测试团队
• Collaborate with Customer
• 与客户合作
• Training TE Engineer on design circuitry and failure analysis skill
• 培训测试工程师电路分析和失效分析技能
• Setup Test equipment & stations
• 设立测试设备和工位
• Review DFM requirements
• 检查生产所需设计的要求
• Set up ATE test program
• 建立ATE测试项目
• Prepare & Review Cpk, GR&R, GoNoGo, SOP Report
• 准备与检查Cpk, GR&R, GoNoGo, SOP报告
• Test Automation review & approve DFM, FAT & SAT, IQC & OQC related documents
• 测试自动化检查与审批DFM, FAT & SAT, IQC 与OQC相关文件
• Collaborate with respective supplier on test design concept
• 与相关供应商合作构建测试设计概念
• Support EE on providing the 1st level FA for failure units.
• 支持设备部提供第一层失效分析
• Support EE on DOEs & FA actions required
• 支持设备部DOE与FA行动所需
• Troubleshoot system applications on customer's request
• 根据客户寻找系统应用故障
• Resolve engineering issues regarding systems application
• 解决系统应用相关德工程问题
• Conduct regular follow up on customer's system level activities
• 跟进执行客户系统应用相关事项

:

• Associate's degree or above
• 大专以上学历
• 5+ years‘ power or PCBA experience in test maintenance/product testing/ failure analysis
• 5年以上电源或电子组装行业测试维护，产品测试，失效分析经验
• Capability of handling foreign customers
• 有与外国客户处理问题的能力
• Can read and write in English
• 具备英文读写能力

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please emailand we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Quality Staff engineerlocated in

Reporting to the

:

• Quality support from NPI to MP whole production life cycle. (对产品从NPI到量产的品质管控负责)
• For MP production: （量产部分）

• Quality management from process to customer. （针对生产制程做品质管控，并对客户负责）
• Drives end to end process yield improvement. （推动整个生产制程的品质改善）
• Customer complaint follow up and leading continue improvement.（客户投诉处理）
• Analyzes reports for field returned products and recommends correctiveaction.（市场退货的分析及对策追踪）
• For NPI project: （试产阶段）

• Develop and define the standard, inspection method during NPI.（研究定义产品标准，以及相应检验检查方法）
• Assist QA manager in improve quality management level and customer

:

• Bachelor’s degree in Electronics, Mechanical, Mechatronic, or Other Related Flied engineering. （电子，机构或相关专业学士学位）
• Good English listening & speaking （英语正常听说）
• Well communication with foreign customer（跟客户良好的沟通能力）
• Quality data analysis & report preparation. （数据分析及报告能力）
• Charger/adapter experience is preferred. （电源经验优先）

What you’ll receive for the great work you provide:

• Social Insurance
• Life Insurance

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please emailand we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

:

• Supervised and Lead Test Engineering Team
• 管理和领导项目测试团队
• Collaborate with Customer
• 与客户合作
• Training TE Engineer on design circuitry and failure analysis skill
• 培训测试工程师电路分析和失效分析技能
• Setup Test equipment & stations
• 设立测试设备和工位
• Review DFM requirements
• 检查生产所需设计的要求
• Set up ATE test program
• 建立ATE测试项目
• Prepare & Review Cpk, GR&R, GoNoGo, SOP Report
• 准备与检查Cpk, GR&R, GoNoGo, SOP报告
• Test Automation review & approve DFM, FAT & SAT, IQC & OQC related documents
• 测试自动化检查与审批DFM, FAT & SAT, IQC 与OQC相关文件
• Collaborate with respective supplier on test design concept
• 与相关供应商合作构建测试设计概念
• Support EE on providing the 1st level FA for failure units.
• 支持设备部提供第一层失效分析
• Support EE on DOEs & FA actions required
• 支持设备部DOE与FA行动所需
• Troubleshoot system applications on customer's request
• 根据客户寻找系统应用故障
• Resolve engineering issues regarding systems application
• 解决系统应用相关德工程问题
• Conduct regular follow up on customer's system level activities
• 跟进执行客户系统应用相关事项

:

• Associate's degree or above
• 大专以上学历
• 5+ years‘ power or PCBA experience in test maintenance/product testing/ failure analysis
• 5年以上电源或电子组装行业测试维护，产品测试，失效分析经验
• Capability of handling foreign customers
• 有与外国客户处理问题的能力
• Can read and write in English
• 具备英文读写能力

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please emailand we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

TheSenior Failure Analysis Engineerwill be based in Dongguan.

What a typical day looks like:

• Setup FA equipment & stations
• Support EE on providing the 1st level FA for failure units
• Support EE on DOEs & FA actions required
• Troubleshoot system applications on customer's request
• Resolve engineering issues regarding systems application
• Conduct regular follow up on customer's system level activities
• Assist manager in improving quality management level
• Collect enough source information ofsuppliers/customers/equipment/engineeringetc.
• Any other duties assigned by management

The experience we’re looking to add to our team:

• Associate‘s degree or above
• 3+ years’ FA working experience in electric industry
• Good English in reading and writing, oral is a plus

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please emailand we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

• New model handle for PVT build, work with related team (DFM/RD) to solve DFM/process issues.新产品PVT生产跟踪，并推动相关成员改善DFM/制程不良
• Prepare all assembly fixture list and requirement, work with supplier for the fixture build, and new fixture receive and verify.制作所有的组装治工具/设备清单，推动供应商制作治工具制作，以及新治工具验收及确认
• Prepare flowchart/Control plan/PFMEA related document.制作工艺流程/制程控制计划/PFMEA等报告
• Work instruction prepare and maintenance base on BOM update and Kaizen project.作业指示制作及参照BOM表进行维护，产线改善及报告
• Process troubling shooting work out the root cause and corrective action. 制程不良的分析，原因查找及改善对策提供
• Productivity improvement and process optimize. 制程改善及优化

• At least 5 years working experience on Power supply field.具备5年以上电源领域相关工作经验
• Good knowledge on IPC- 610-E standard. 熟悉IPC-610-E标准
• Good knowledge of DFM guideline. 熟悉DFM标准
• Good knowledge of power supplier manufacturing process. 熟悉电源产品制作工艺流程
• Familiar English skill, must can read and write. 熟练读写英语

Required Skills:

Optional Skills: