Chemical Engineer jobs in United States, Tennessee, Chattanooga

Develop sufficient knowledge to independently conduct specialist reviews for assigned technology Fired Heaters.
Thermal design of Fired Heaters using FRNC software.
Primary single point contact for assigned technology area in Delhi for:
New Fired Heater Specifications
Sales / Service support
Revamp designs
Existing “Fired Heaters” evaluations
Fired Heaters troubleshooting
Maintain and coordinate development of required infrastructure within assigned technology area – in coordination with other local/ global specialist.
Specification of auxiliary Fired Heater equipment like Burner, APH, ID & FD Fans.
Participate in field/shop inspection or troubleshooting activities related to assigned technology area.
Work with corresponding technology specialist to improve design and develop new designs.
Working knowledge of industry standards like API 560, API 530, API 535 etc.
Familiarity with related vendors and their products.
Ability to perform technical evaluations of vendor proposals.
Minimum RequirementsBE Chemical/ Mechanical or equivalent degree.
Around 7+ years of experience in operations or design of Fired Heaters.
Proficient in the use of computers for specification generation, technical evaluations, and the electronic sharing of data across geographically separated work groups.
Excellent communication and interpersonal skills required
Additional Information

• JOB ID: HRD249396
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Lead Global Solutions Specialist - OperationsThis position will be the key leadership position to look after 24x7 operations at Global Solutions Command and Control Center.
Job Description:Lead Global Solutions Center, day to day operations with strong operation MOS.
This role will be key in balancing the resource and priority items based on SIOP meetings.
This position is the key to ensuring seamless operation and accountability of 24x7 decision making.
Ensuring high resource utilization/billability of the center.
Accountable to minimize manual work by Automation/Standardization.Monitoring different UOP technologies process and identifying areas for improvement/optimization and assets requiring enhanced focus.Initial triage of technical issues with the escalation process to TS.
Proactively communicate insights from trends, establish patterns, diagnostic investigations, and solutions to prevent future issues.
Ensure upkeep of all solutions by troubleshooting the PM/PTA/Exception Based Alerts/Benchmarking /Future Solutions on time to ensure high on-screen availability of the running solutions
Expertise in doing Exploratory Data Analysis on Time series data using ProSight.
Hands-on skills in developing insights end-to-end, including EDA, data processing, hyper-parameter tuning, baseline modeling, and model deployment.
Apply data mining to handle unstructured data to derive technical insights.
Perform descriptive and inferential statistics to summarize datasets.
Prior knowledge of Time Series Forecasting in Prosight/Data Science.
Knowledge of UOP Technologies.
Derive problem statement from ambiguous data, create a hypothesis, use analytics and tools to test hypothesis and form conclusions
Excellent technical expertise in all the areas of Descriptive, Predictive, and Prescriptive Analytics, including Optimization Analytics, Simulation & Advanced Machine Learning Algorithms.
Experience in cleaning, process, manipulate, and analyze data.
Ability to build scalable, user-centric applications -Building Models Data Science
Analysis of large amounts of historical data, determining suitability for modeling, data clean-up and filtering, pattern identification and variable creation, applying automated predictive analytics.
The focus is to support product, system, and solution through designing and developing pipelines.
Establishing additional work processes & documentation for the GSC.Part of 24x7 Operation of GSCCC Digital Insight
Working in 24x7 Shift is an integral part of this role. Work with GSCCC Center leader closely to make GSC as “Center of Excellence”Additional Candidate Qualifications:
Excellent verbal, written, interpersonal communication & effective presentation skills
English language (oral and written)
Ability to multi-task
Be flexible to come in shift as a replacement in short notice
Exposure to techniques like forecasting, predictive methods, classification techniques, and segmentation is highly desirable.
Effective project management, presentation, and communication skills
Continuous learning and research-oriented mindset. Ability to think out of the box: Ability to come up with bright ideas and always looking at the next big thing in technology.
Have strong analytical skills; be able to interpret data, identify trends, and make suggestions for improvements
Knowledge of DataScience Open Source is added plus.
Proficiency in computer applications with emphasis on Data Analytics & Data Science is desirableComprehensive analytical, troubleshooting & problems solving skills.Ability to define the problem with limited information
• Bachelor's degree in chemical engineering
• Min of 12 years of experience in technical service or process operation/engineering/monitoring role within the refining and petrochemical industry.
Additional Information

• JOB ID: HRD265500
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Keyresponsibilities include:
Develop performance estimates in support of Catalysts, Adsorbents & Specialties (CA&S) Sales and assist in the preparation of Technical Proposals.
Provide sales support: including technical and commercial perspective, recommendations on guarantees, unit start-up support and turn-around support and analysis of commercial operating experience.
Effectively communicate UOP recommendations, requirements and benefits.
Champion change and improvement in technologies supported via innovation.
Participate in engineering review meetings for new units and revamps including Design Basis, Process Flow Diagrams (PFD), Process & Instrumentation Diagrams (P&ID), Hazard and Operability Study (HAZOP), Model Reviews, and other activities.
Bring operational and safety considerations into design to ensure reliable performance.Provide office-based and on-site troubleshooting assistance to commercial units and conduct on-site commercial unit audits.Develop, prepare, update general operating manuals, process technology manuals, and training material and present UOP technology training courses.
YOU MUST HAVE

• Basic Candidate Qualifications:B.E. / B.Tech. degree in Chemical Engineering is required.
  8+ years of experience in technical service, process operations, or design engineering role within the refining, petrochemical or gas processing industry is required.Additional Candidate Qualifications:Experience in design/operation of Platforming, Penex, Isomer and Butamer unit is essential.
  At least 6 years of UOP FOS, UOP Engineering /Technical Services or equivalent refinery process operations or technical services experience is considered ideal.
  Strong verbal, presentation and written communication skills.
  Ability to analyze and solve complex and challenging problems. Self-driven and always looking to improve on the current best practices or technology offering.
  Strong mechanical aptitude and troubleshooting skills.
  Ability to work well independently and in a team environment.
  Ability to handle multiple tasks concurrently.
  Ability to travel 25% annually to both domestic and international sites.

Additional Information

• JOB ID: req487484
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

Key Responsibilities
Own and develop additional technology artefacts (templates, tools, guides, checklists etc..) after handover from development.
Provide post deployment support on technology related issues.
Ensure consistency and standardization of design.
Train/mentor new engineers.
WE VALUE
Familiarity with UOP work processes as well as Refining, Petrochemicals, Sustainable or Gas Processing technologies
Exposure to Software as a Service model
Strong technical leadership
Exposure to various UOP technologies
Working knowledge of UOP digital services
Unisim experience
Demonstrated problem-solving skills
Bachelor’s degree in Chemical Engineering
8+ years in Operations/ Services/Design engineering in Refining/Petrochemical preferably on UOP technologies
Additional Information

• JOB ID: HRD254564
• Category: Engineering
• Location: One-HON-UTC-2+4F ,UTC, 2F 4F, Sushant Lok Phase I,,Sector 43,Sushant Lok Phase I,,Gurgaon,HARYANA,122022,India
• Exempt

You will support technical projects finding innovative, efficient means to improve Distribution business of Honeywell on a global scale.Key Responsibilities• As an engineer on Corporate Distribution team, you will be responsible for defining and prescribing evolutionary roadmap for Honeywell global distribution centers.
• Design and develop warehouse management systems and solutions tailored to our operational needs. Also, implement system configs, integrations, and customizations to optimize warehouse processes.
• Design, develop and implement scalable models to capture actionable opportunities targeting reduction in OPEX cost and optimizing distribution needs.
• Work closely with IT, business logistics, and operations team to ensure effective system integration and alignment with business goals.
• Use SQL and R/Python to perform data pull and analyze distribution business trends driving key business decisions.
• Analyze and determine the optimal solutions for end-to-end flow of parts – including logistics routing, inventory optimization, capacity planning, storage, cross-docking operations etc.
• You will have full ownership over end-to-end process from identification of opportunities and bottlenecks in the supply chain to delivery of solutions
• Simulate and conduct sensitivity analysis to stress test existing DC operations and future models to identify operational bottlenecks and risks

• Warehouse Engineering: Functional experience with WMS, Product Slotting, Distribution Center MHE, Studying Labor Standards (time studies), Distribution Layouts (AUTO-CAD)
• Knowledgeable in modeling heuristics, best practices, and effective solutions from within the industry or derived from other industries
• MS Office, MS Project, Transportation/Warehouse Management Systems (TMS and WMS), and Network analysis tools (Lmasoft), MS Visio, Statistical Analysis Tools, Simulation experience required

YOU MUST HAVE• Warehouse Engineering: Functional experience with WMS, Product Slotting, Distribution Center MHE, Studying Labor Standards (time studies), Distribution Layouts (AUTO-CAD)
• Knowledgeable in modeling heuristics, best practices, and effective solutions from within the industry or derived from other industries
• MS Office, MS Project, Transportation/Warehouse Management Systems (TMS and WMS), and Network analysis tools (Lmasoft), MS Visio, Statistical Analysis Tools, Simulation experience required
WE VALUE
• Ability to thrive in a fast-moving and constantly evolving high growth environment
•Bachelor's degree in Industrial Engineering, Business or Supply Chain program and a minimum of 6 years of relevant work experience or a Master’s degree and 3 years or more relevant experience in the Distribution, Warehousing, Supply Chain Logistics industry is required

Additional Information

• JOB ID: req484634
• Category: Integrated Supply Chain
• Location: 855 S Mint St,Charlotte,North Carolina,28202,United States
• Exempt