דרושים Sr Reliability Program Manager ב-אמזון ב-Vietnam, Hanoi

• Drive Design for Manufacturing and Design for Reliability reviews of NPI products/concepts at CM and lead activities to optimize product and process designs.
• Make recommendations for product/process design changes & final assembly standards/limits that have direct impact to final product cost, quality and delivery.
• Standardize/Modularize SMT&FATP assembly equipment/stations ensuring all critical closed loop process controls are in place.
• Study existing processes, equipment and fixtures. Find ways to improve by means of product or process redesign.
• Use FMEAs to define requirements for process design, equipment & fixtures including all critical process controls.
• Perform FMEA and Control Plan reviews of each fixture, equipment and process step, identify all potential failure modes and process risks and drive mitigation steps with Contract Manufacturer and Product Design teams.
Drive Improvement
• Uncover and highlight Manufacturing/Assembly/Test issues to ensure established direct labor, throughput, product quality and yield levels which affect bottom line MVA are optimized at the start of production.
• Interface with Contract Manufacturers Factory team to improve cycle times, UPH, process/product yield, product quality/reliability and drive cost reductions.
Factory Deliverables
- Own content and ok2publish of SOP- Qualification of all production processes for SMT, assembly and packout including fixtures, automation machines, dispensing, thermal curing- Identification and execution of production improvements to reduce failures, cycle-time, touch-time, and/or quality escapes.- Daily communication for NPI project status- Conduct DOE for identifying RCCA for SMT, assembly and packout related issues.- Tier1 contact person at factory for all things assembly related.- Responsible for implementation and documentation of production line process SOP.- Yield attack for any process related contributors

- BS Mechanical Engineering or related degree
- 8+ years of relevant experience in consumer electronics manufacturing
- Well-versed in production factory Final Assembly, Test, and Pack-out (FATP)
- Natural bias towards documentation; use of defect tracking systems (Jira) and document control (Arena)
- Proven track record of delivering parts for production on time to/from overseas vendors
- Exceptional communication skills - verbal, written and technical communication in English and Vietnamese required;

- MS Mechanical Engineering or related degree
- 10+ years of relevant experience in consumer electronics manufacturing
- Well-versed in production factory Final Assembly, Test, and Pack-out (FATP)
- Natural bias towards documentation; use of defect tracking systems (Jira) and document control (Arena)
- Proven track record of delivering parts for production on time to/from overseas vendors
- Exceptional communication skills - verbal, written and technical communication in English and Vietnamese required; Mandarin a plus

WiFi is the new electricity. Outside the smartphone, it’s the technology we depend on the most. The foundation for the modern home. The basement of Maslow’s pyramid. It makes our favorite experiences -- Netflix, Spotify, FaceTime -- come to life.But at best, WiFi is like death by a thousand cuts: dead zones, painful setup, embarrassing passwords, equipment that’s a major eyesore. At worst, it's a complete failure -- usually right when you need WiFi most.
Job overview:
Key job responsibilities
Own implementation of holistic production processes including test and inspection processes for incoming materials (IQC), work-in-process (WIP) and finished goods (FG).Contribute to the product quality criteria and determine if the product meets expectations.
Learn from quality issues on the RMA line and systemically feedback CAPA to the production line.
Conduct manufacturer audits and respond to findings by proposing and implementing necessary corrective and preventative actions.
Review and verify non-conforming materials to initiate and drive associated corrective actions as required.
Contribute to final product release activities in accordance with established procedures, production schedules and gate exit requirements.
Develop and prepare documentation, post reports, drive quality metrics and communication prior to NPI builds and Sustaining programsTrack issue and task progresses in JIRA and understand BOM components and layout with a PLM system (i.e. Arena, etc.)
Work closely with JDM/ODM DRIs to review potential improvements to address quality issues and risks

- BS degree in Quality/Electrical/Mechanical Engineering.
- 5+ years in electronics manufacturing; experience with RF and/or Wi-Fi based products will be a plus
- 5+ years of working with New Product Introduction (NPI)
- Experience with industry standards (IEC, UL, ASTM, ANSI, TUV, ISO, IPC, MIL, etc.)
- Excellent computer skills (including, but not limited to: Windows/Mac, Word, Excel, PowerPoint, Visio, MS Project, Internet Search Skills)
- Excellent English communication skills, both written and verbal (Mandarin is a plus)
- Demonstrated problem solving and root cause analysis skills
- Deep understanding on MSA (Measurement System Analysis), Process Quality Control in using Cpk and Gage R&R, statical data analysis, 7QC Tools
- Six Sigma Green Belt or Black Belt certification
- Certified Auditor (e.g. ISO 9001, TL 9000)

- Advanced Manufacturing expertise (Surface Mount Technology (SMT), Final Assembly Test and Pack (FATP) or Assembly).
- Proactive self-starter with a willingness to learn and grow attitude
- Effective presentation and project management skills
- Knowledge of Statistical Process Control (SPC), Line Stop/Line Start Criteria, Line Audits, Electro Static Discharge (ESD), Yield Definitions and Calculations (including First Pass Yield and Real Pass Yield), Run-in Tests (RIT) and rules used for No Trouble Found.
- Facilitate Contract Manufacturer (CM) audit (QMS, ESD etc.).
- Facilitate Incoming Quality Control (IQC) – Requirements, Equipment, and Sampling Plans.
- Developing program specific quality plans including tenets.
- Advanced Reliability Engineering exposure and understanding including Reliability Testing, Reliability Waterfall, Test standards for table top devices, understanding of ESD requirements and testing, Weibull distribution and analysis, Ongoing Reliability Testing (ORT), and Daily Run-in Diagnostic Tests (DRDT).
- Demonstrated collaboration with Reliability Engineering on risk assessment of suspect inventory and customer impact severity of complicated issues.
- Using advanced knowledge of the Engineering Control Log (ECL) process for defining component level traceability requirements.
- Ability & willingness to travel as required for up to 35%

Key job responsibilities
* Own the design, development, and maintenance of datasets, ongoing metrics, analyses and dashboards to drive key business decisions.
* Develop queries and visualizations for ad-hoc requests and projects, as well as ongoing reporting.
* Continually improve ongoing reporting and analysis processes, automating or simplifying self-service support for customers.
*Use analytical and statistical rigor to identify performance gaps and opportunities for optimization.
*Provide input and recommendations on technical issues to data engineering and software engineering teams
* Promote best practices in ETL and mentor your team

- 10+ years of professional or military experience
- 5+ years of SQL experience
- Experience programming to extract, transform and clean large (multi-TB) data sets
- Experience with theory and practice of design of experiments and statistical analysis of results
- Experience with AWS technologies
- Experience in scripting for automation (e.g. Python) and advanced SQL skills.
- Experience with theory and practice of information retrieval, data science, machine learning and data mining

Sr. Device Quality Manager (Sr. DQM)

o Minimum of a BSME/BSIE/BSEE or equivalent training experience
o Preferred 7+ years of working experience in engineering and/or quality
o Good understanding of assembly, manufacturing and testing processes in high volume electronic consumer devices manufacturing environment
o Problem Solver - Deliver solutions to complex problems through in-depth data analysis and forensics, using methodical approach such as DMAIC along with experience, innovation and judgment to make decisions that may be based on partial information
o Solid understanding and demonstrated success with practical applications of Lean / Six Sigma tools such as Failure Mode & Effects Analysis, Design of Experiments, Measurement System Analysis, Analysis of Variance, Hypothesis Testing, Value Stream Mapping, Pareto Charts, Gage Repeatability & Reproducibility, Cpk.
o Technical knowledge of conducting process audits and formulating plans to drive continual quality improvements within the factory operations
o Must be self-motivated/self-directed, is able to manage multiple work streams simultaneously and flawlessly.
o Excellent oral and written communication skills in English.

o MSME/MSIE/MSEE
o Knowledge of Quality System, Device quality management experience
o ASQ certified Six Sigma Green, Black belt, CQE, CQM and CQA certifications are highly desired
o Ability to create and innovate quality deliverables/processes during new product development and sustaining program management
o Advanced understanding and deployment of quality tools
o Ability to influence others in an ambiguous environment while interacting at all levels within organization.

Sr. Device Quality Manager (Sr. DQM)

o Minimum of a BSME/BSIE/BSEE or equivalent training experience
o Preferred 7+ years of working experience in engineering and/or quality
o Good understanding of assembly, manufacturing and testing processes in high volume electronic consumer devices manufacturing environment
o Problem Solver - Deliver solutions to complex problems through in-depth data analysis and forensics, using methodical approach such as DMAIC along with experience, innovation and judgment to make decisions that may be based on partial information
o Solid understanding and demonstrated success with practical applications of Lean / Six Sigma tools such as Failure Mode & Effects Analysis, Design of Experiments, Measurement System Analysis, Analysis of Variance, Hypothesis Testing, Value Stream Mapping, Pareto Charts, Gage Repeatability & Reproducibility, Cpk.
o Technical knowledge of conducting process audits and formulating plans to drive continual quality improvements within the factory operations
o Must be self-motivated/self-directed, is able to manage multiple work streams simultaneously and flawlessly.
o Excellent oral and written communication skills in English.

o MSME/MSIE/MSEE
o Knowledge of Quality System, Device quality management experience, Antenna and Radio frequency experience
o Test scripts development
o ASQ certified Six Sigma Green, Black belt, CQE, CQM and CQA certifications are highly desired
o Ability to create and innovate quality deliverables/processes during new product development and sustaining program management
o Advanced understanding and deployment of quality tools
o Ability to influence others in an ambiguous environment while interacting at all levels within organization.