דרושים Graduate Talent Soc Functional Validation ב-אינטל ב-מלזיה

-Develops pre-silicon functional validation strategy, test plan, test suite, test methodologies for state-of-the-art SoC/chipset.-Collaborates with architects, micro-architects, design and system validation teams for IP/SoC validation strategy, technical readiness and failure disposition.-Performs low level and complex debug for multiple systems, subsystems within a product, or at the IP/SoC level for Intel products. -Applies deep understanding of IP/SoC design, architecture, firmware, and software to resolve triage failures, marginality issues, and conduct root cause analysis.-Defines, develops, and implements techniques for faster debug at the IP/SoC and platform level and isolates failing components of a system.-Graduates from Bachelor / Master's degree in Electrical and/or Electronic Engineering, Computer or Microelectronic Engineering . -Knowledge on Computer System Architecture and/or related software-hardware sub-systems.-Knowledge on software programming in Python, Maestro/Perspec, C and/or C++ language and UNIX, automate verification flow and improve efficiency.Shift 1 (Malaysia)Malaysia, Penang

This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

-Develops pre-silicon functional validation strategy, test plan, test suite, test methodologies for state-of-the-art SoC/chipset.-Collaborates with architects, micro-architects, design and system validation teams for IP/SoC validation strategy, technical readiness and failure disposition.-Performs low level and complex debug for multiple systems, subsystems within a product, or at the IP/SoC level for Intel products. -Applies deep understanding of IP/SoC design, architecture, firmware, and software to resolve triage failures, marginality issues, and conduct root cause analysis.-Defines, develops, and implements techniques for faster debug at the IP/SoC and platform level and isolates failing components of a system.-Graduates from Bachelor/Master's degree in Electrical and/or Electronic Engineering, Computer or Microelectronic Engineering. -Knowledge on Computer System Architecture and/or related software-hardware sub-systems.-Knowledge on software programming in Python, Maestro/Perspec, C and/or C++ language and UNIX, automate verification flow and improve efficiency.Shift 1 (Malaysia)Malaysia, Penang

This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

Develops pre-silicon functional validation test suites to validate system will meet design requirements and delivering state-of-the-art chipsets/SoC validation on the next generation design.
Creates test plans, defining, executing and debugging on system emulation models, and finding and implementing corrective measures for failing test.- Bachelor/Masters in Computer/Electronic Engineering
- Knowledge on Computer System Architecture and/or related software-hardware sub-systems.
- Experience with software programming in Python, C and/or C++ language.
- Experience ondebug, or RTL validation is a plus.- Highly motivated, curious, and keenly interested in finding and resolving technical anomaliesShift 1 (Malaysia)Malaysia, KulimMalaysia, Penang

In this position, you will be performing Failure Analysis and root cause analysis on Intel CPU, Chipsets and Netcomm platform products. This includes PC system and/or tester testing and analysis to isolate the failing instruction and internal signal, applying circuit analysis and various device localization equipment and techniques to localize the failing circuitries and performing physical failure analysis to locate the defect.Your responsibilities will include but not be limited to1. Responsible for improving product yield, quality and reliability through the recommendation of corrective actions to counterparts in Fab and Assembly and Test for root cause fix.2. Participating in new product and/or technology transfer and startup, enabling automation and improvement on the failure analysis process, tools and methodology, developing new FA techniques and proliferating learning across sites.You must possess a Master's or a Bachelor's degree in Electrical, Electronics, or Microelectronics. Additional qualifications include1. Excellent verbal and written communication skills2. Ability to work well in a diverse team environment, excellent teamwork and a positive mindset3. Strong problem solving and analytical skills4. Good knowledge in one or more of these areas:a) Device physics, I/O structure,b) Microprocessor architecture and micro architecture, microprocessor circuit, circuit analysis and IA-32c) Perl/Python/C programming/Assembly languaged) Wafer fabrication process (added advantage)Shift 1 (Malaysia)Malaysia, Penang

This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

Job Description:

• Responsible for ensuring the testability and manufacturability of integrated circuits from component feasibility stage through production ramp.
• Make significant contributions to design, development and validation of testability circuits.
• Evaluation, development and debug of complex test methods.
• Develop and debug complex software programs to convert design validation vectors and drive complex test equipment.
• Develop test validation and production test hardware solutions.
• Test, validate, modify and redesign circuits to guarantee component margin to specification.
• Analyze and evaluate component specification versus performance to ensure optimal match of component requirements with production equipment capability with specific emphasis on yield analysis and bin split capability.
• Analyze early customer returns with emphasis on driving test hole closure activities.
• Create and apply concepts for optimizing component production relative to both quality and cost constraints.
• Autonomously plan and schedule own daily tasks, develop solutions to problems utilizing formal education and judgment.

Qualifications:

• Master/Bachelor Degree in Electronics, Electrical, Microelectronics or Computer Engineering.
• Good programming skill in C++ or Java.
• Good understanding of Radio technology, WiFi, BT, RF test methods and RF instruments as well as Automated Test Equipment (ATE) will be an added advantage.
• High volume manufacturing experience with RF testing.
• Good communication and leadership skills.

Shift 1 (Malaysia)Malaysia, Penang

Job Description:

• Develops the logic design, register transfer level (RTL) coding, simulation, and provides DFT timing closure support as well as test content generation and delivery to manufacturing for various DFx content (including BSCAN).
• Participates and collaborates in the definition of architecture and microarchitecture features of the block, subsystem, and SoC under DFT being designed (including TAP, BSCAN, proc monitors, in system test/BIST).
• Develops HVM content for rapid bring up and ramp to production on the automatic test equipment (ATE). Applies various strategies, tools, and methods to write and generate RTL and structural code to integrate DFT. Optimizes logic to qualify the design to meet power, performance, area, timing, test coverage, DPM, and test time/vector memory reduction goals as well as design integrity for physical implementation.
• Reviews the verification plan and drives verification of the DFT design to achieve desired architecture and microarchitecture specifications. Ensures design features are verified correctly and resolves and implements corrective measures for failing RTL tests to ensure correctness of features.
• Integrates DFT blocks into functional IP and SoC and supports SoC customers to ensure high quality integration of the IP block. Collaborates with post silicon and manufacturing team to verify the feature on silicon, support debug requirements, and document all learnings and improvements requirement in design and validation.
• Drives high test coverage through structural and specific IP tests to achieve the quality and DPM objectives of the product and develops HVM content for rapid bring up and production on the ATE.

Qualifications:

• Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related fields.
• 5+ years of experience in DFT, SOC design, or related semiconductor design areas. Strong knowledge of DFT techniques, including BIST, boundary scan, JTAG, and fault simulation.
• Experience with EDA tools for DFT (e.g., Synopsys DFT Compiler, Mentor Tessent, Cadence Modus, ATPG).Proficiency in hardware description languages such as VHDL, Verilog, or System Verilog.
• Expertise in automated test generation and analysis tools. Strong problem-solving skills with the ability to troubleshoot complex testability issues. Experience with RTL design and verification processes.
• Excellent communication and teamwork skills to collaborate with multi-disciplinary teams. Ability to analyze, review, and optimize existing DFT strategies for design and test coverage. Familiarity with semiconductor manufacturing processes and test flows.

Preferred Qualifications :

• Experience with advanced test techniques such as DFT for low-power designs. Familiarity with industry standards such as IEEE 1687 (IJTAG), 1149.1 (JTAG), IEEE 1500 (Core Test), and others.
• Knowledge of Python or other scripting languages for automation.
• Experience with failure analysis, yield improvement and test cost optimization methodologies.
• Experience with SOC (System on Chip) or complex multi-chip designs requirements listed would be obtained through a combination of industry relevant job experience, internship experiences and orschoolwork/classes/research.

Experienced HireShift 1 (Malaysia)Malaysia, Penang

This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

Job Description:

In this position, you will be responsible for timely deployment, installation, qualification and sustaining of assigned Test equipment and/or related processes to support product or package.

Your responsibilities will include but not be limited to

• Improving and sustain the Test equipment healthy and process to meet safety, quality, productivity.

• Driving resolution and continuous improvement projects through Virtual Factories and Copy Exactly to improve performance of equipment assigned.

• Participating in development or evaluation of equipment and tooling to meet Module spec and high volume manufacturing needs.

• Defining or improving process control systems related to module to prevent excursions.

• Providing training and guidance to the technicians to improve their competency.

• Establishing respective collateral requirement such as metrology and spares.

• Interacting with supporting groups through virtual factory partnership.

Qualifications:

You must possess a Degree in Engineering field preferably inMechanical/Electrical/Electronicengineering.

Additional qualifications include:

• Possess good analytical and problem solving skills to timely resolve issue.

• Demonstrate excellent communication, influencing and planning skills.

• Possess Good leadership, training and organizational skills.

• Have knowledge of Test Process/Test Methodology would be an added advantage.

• This role is also open to fresh graduates and early-career professionals.

Shift 1 (Malaysia)Malaysia, Penang

This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.