דרושים Staff Software Engineer ב-Ge Healthcare ב-סין

Essential Functions/Responsibilities

- Work with HW & SW engineer to identify and resolve product issues through root cause analysis, then development of cost-effective solutions, and by overseeing successful implementation into production

1. B.S. Degree in Electrical or related technical degree and 3+ years of working experience in electrical circuit design area.

2. Demonstrated troubleshooting, analytical, and problem solving skills

3. Ability to work independently.

4. Demonstrated good communication skills.

5. Demonstrated good understanding with quality process control.

1 Good electrical circuit design skills.

2 Good MCU firmware coding skills.

3 Good Power / Battery management related design skills is preferred.

4 Regulatory (Safety & EMC) knowledge for medical products.

5 Demonstrated program or project management skills.

6 Clear think and good logical thinking are preferred.

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Roles and Responsibilities

• Manage supplier development including assisting key suppliers towards QA. Support suppliers in reaching optimum quality and industrial standards of excellence.
• Utilizes in-depth knowledge of a discipline and analytical thinking to execute policy/strategy. Basic knowledge of related job disciplines.
• Acts as a resource for colleagues with less experience. May lead small projects with low risks and resource requirements. Explains information; developing skills to bring team members to consensus around topics within field. Conveys performance expectations and may handle sensitive issues.
• Jobs at this level function with some autonomy but are subject to functional practices and precedents or are covered by well-defined policies or review of end results. The job allows modification of procedures and practices covering work as long as the end results meet standards of acceptability (quality, volume, timeliness etc.).
• Uses some judgment and has the ability to propose different solutions outside of set parameters to address more complicated, day-to-day problems. Has ability to prioritize information for data analysis. Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own team to arrive at decisions.

Required Qualifications

• This role requires advanced experience in the Sourcing & Supplier Quality Development. Knowledge level is comparable to a Bachelor's degree from an accredited university or college ( or a high school diploma with relevant experience).

Desired Characteristics

• Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills.

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Duties include (but are not limited to):

• Designing the following electrical components and interconnects: digital, FPGA, analog circuit.
• Engaging in all phases of new product introduction, including concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support

• Identifying and developing new opportunities to leverage Strategic Sourcing objectives and Common Technology initiatives in the MR Product line
• Ensuring reliability, performance, and delivery through supplier relationships

Basic Qualifications:

• BS in Electronics Engineering or equivalent experience
• 3 years electrical or digital design experience
• Familiar with electrical and digital testing equipment (Oscilloscope, Power meter, SPA…).
• Familiar with PWA/PWB and subsystem design techniques for signal integrity, EMC design and simulation tool. (Cadence, PSPICE …)
• Familiar with digital design and simulation tools. (Quartus, ModelSim, Matlab, …)

:

• MS or PhD in Electronics Engineering or equivalent experience
• Minimum 5 years experiences on electronics R&D in healthcare, automation, or telecommunication industry
• Demonstrated technical depth in electrical design.
• Familiar with control loop design.
• Self-starter, energizing, results oriented, and able to multi-task
• Excellent teamwork, coordination, and communication skills
• Strong sense of ownership
• Ability to meet aggressive reliability, performance, cost, serviceability, and delivery targets
• Excellent oral and written communication skills, and global project experience
• Understand design process well

Inclusion and Diversity

We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership – always with unyielding integrity.

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

1. Roles & Responsibilities

• Executing design visualization efforts with 3D CAD models and essential component and assembly details to explore multiple design options
• Developing innovative designs to meet all requirements for performance, reliability, cost, and manufacturability
• Developing engineering design concepts for components and electromechanical assemblies that have tough requirements for size, precision, reliability, and cost
• Leading quality engineering projects that provide imaginative solutions to engineering and customer issues
• Influencing cross-functional teams to implement quality actions
• Delivering improvements to customer focused metrics
• Validating product sub-system reliability performance

2. Qualification/Requirements

• Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position
• Complete all planned Quality & Compliance training within the defined deadlines
• Identify and report any quality or compliance concerns and take immediate corrective action as required
• Support compliance/closure of Regulatory and Quality requirements before completing Design Outputs/Program Deliverables
• Participate in continuous improvement activities by identifying and appropriately escalating process and product quality gaps, providing solutions when possible

3. Desired Characteristics

• MS or above in Mechanical Engineering or equivalent (defined as 5 years relative engineering experience)
• 5+ years working experience in mechanical design
• Experience/knowledge of robotics and autonomous system design is preferred
• Good communication in English
• Experience of working in global team and familiar with manufacturing process

4. Inclusive & Diversity

5. Behavior Statement

6. Total Rewards Statement

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

Duties include (but are not limited to):

1.Responsible for the development and validation of new material (adhesives, primer, piezoelectric ceramic, single crystal, acoustic lens, match layer, backing, thermal material, etc.)

2.Participate in the development of production process for new material 3.Participate in the technology roadmap development for new material

4.Work with the cross-function team to qualify new material suppliers to ensure the supplier’s technical capability and production capacity & quality can meet ourrequirements

5.Use the expertise in material to provide continuous supports for NPI, ATD, and VCP projects

6.Collaborate with design engineer and manufacturing engineer to assess the change or material deviation and solve IB problems

Quality Specific Goals:

1.Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position

2.Complete all planned Quality & Compliance training within the defined deadlines

3.Identify and report any quality or compliance concerns and take immediate corrective action as required

4.Ensure compliance/closure of Regulatory and Quality requirements before approving Design Outputs/Program Deliverables

5.Lead continuous improvement activities by driving the implementation of process and product quality improvement initiatives

Qualifications:

1.Master or PhD in Materials or Chemical Engineering

2.More than 5 years’ experience for Master and 3 years’ experience for PhD in developing new materials and designing new processes with strong troubleshooting experience

3.Proficiency in the knowledge theory of adhesives (epoxy, cyanoacrylate), chemicals and primer knowledge theory of adhesives (epoxy, cyanoacrylate) and additive industrial processes

4.Familiar with the process and test method of material configuration and have the experience of epoxy resin bonding process.

5.Experience in developing ultrasound transducers is a plus

6.Familiar with the properties of acoustic material (piezoelectric ceramic, single crystal, acoustic lens, backing, and match layer) is a plus.

7.Proficiency in English communicate with cross-functional team members

Desired Characteristics:

1.Excellent communication skills both in oral andwritten

2.The spirit of initiative, ability to motivate, versatility, focused on theresults

3.Demonstrated ability to solve problems

4.Personal development skills: curiosity, ambition, enthusiasm, team spirit-oriented results.

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

• 规定优化的物理配置，以转换机械输入，从而驱动通电的电力系统发电。
  论述电力电子设备、开关设备、变压器、母线、电缆、非导电材料和综合系统集成概念的电气设备和系统的配置，特别是主发电机。
  
• 深入了解一门技术学科。利用先前的经验和获得的技术专业知识来执行政策/策略。
• 深入理解关键业务驱动力；用这种理解来完成自己的工作。深入了解自己团队的工作如何与其他团队融合并为该领域做出贡献。
• 具有一定程度的判断能力，并能够在有指导的条件下，在设置参数之外提出不同的解决方案。利用先前的经验和在职培训来解决简单的任务。拥有解决问题所需的技术技能和分析思维。可以使用自己团队以外的多个内部资源来做出决定。
• 此级别的职位很可能是具有公认的人际交往能力的个人贡献者，或是可以雇用和培养人才的早期领导者。为新团队成员提供非正式指导。
  

基本资格

• 该岗位要求在领域具有较丰富的工作经验。学力水平相当于从正规高等院校取得学士学位 （或根据相应工作经验具有高中学历）

所需特性

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.

角色与职责

• 管理总体规划，物料流程和系统，准备和更新生产计划和采购需求。确保与生产计划和 KPI 的运营一致。优化库存和流程改进。
• 深入了解一门技术学科。利用先前的经验和获得的技术专业知识来执行政策/策略。
• 深入理解关键业务驱动力；用这种理解来完成自己的工作。深入了解自己团队的工作如何与其他团队融合并为该领域做出贡献。
• 具有一定程度的判断能力，并能够在有指导的条件下，在设置参数之外提出不同的解决方案。利用先前的经验和在职培训来解决简单的任务。拥有解决问题所需的技术技能和分析思维。可以使用自己团队以外的多个内部资源来做出决定。
• 此级别的职位很可能是具有公认的人际交往能力的个人贡献者，或是可以雇用和培养人才的早期领导者。为新团队成员提供非正式指导。
  

基本资格

• 该岗位要求在领域具有较丰富的工作经验。学力水平相当于从正规高等院校取得学士学位 （或根据相应工作经验具有高中学历）

所需特性

Inclusion and Diversity

Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.