דרושים Test & Debug Engineer-1 ב-Flex

What a typical day looks like:

you will be responsible for planning, optimizing, and controlling production processes while ensuring quality, safety, efficiency, and cost-effectivenessKey Responsibilities:1. Lead the transition from development to manufacturing (NPI), including:- Defining full process flows from SMT to final assembly.- Developing and implementing production workstations, test stations, and tooling.- Creating work instructions and supporting pilot builds.2. Provide hands-on technical support to production lines:- Troubleshoot process and equipment issues in real-time.- Drive yield improvement, root cause analysis, and corrective actions.- Monitor key KPIs such as cycle time, OEE, and first pass yield.3. Lead engineering changes (ECOs) and implement them in the production environment.4. Collaborate across departments to solve technical issues, improve workflows, and lead cost-saving initiatives.5. Ensure compliance with customer specifications, industry standards, and regulatory requirements.6. Participate in EOL planning, build-out execution, and risk mitigation for legacy products.7. Support cost-reduction and process optimization initiatives, including lean

- B.Sc. inMechanical/Electronics/ManufacturingEngineering or equivalent.

- 3+ years of experience in manufacturing engineering for high-complexity electronics.

- Hands-on experience with SMT, PCBA, functional test systems, and final assembly processes.

- Experience supporting NPI, ECO implementation, and production ramp-up.

- Strong analytical and problem-solving skills; familiarity with root cause tools.

- Excellent communication skills in Hebrew and English.

Preferred Skills:

- Experience with networking or data center products.

- Familiarity with PLM tools (Agile) and ERP systems.

Required Skills:

Optional Skills:

The “” will be based in
……., reporting to ……

In this role, you will be maintaining quality engineering programs, standards and improvements within the organization.

Responsibilities:

• Develops and initiates standards and methods for inspection, testing and evaluation.
• Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
• Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost.
• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability.
• Compiles and writes training material and conducts training sessions on quality control activities.
• Holds up Product Engineers and Quality Program Managers with customer interfaces as necessary on quality related issues.
• Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• Initiates corrective action requests as needed and tracks to satisfactory completion.
• Assists with development and implementation of quality audits.
• In charge of developing, applying, revising and maintaining quality standards for processing materials into partially finished or finished products.
• Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• Explores reports and returned products and recommends corrective action.
• Establishes program to evaluate precision and accuracy of production equipment and testing, measurement and research of equipment and facilities.
• Approves product, process and equipment qualifications.
• Provides liaison to various regulatory bodies.

Qualifications:

• Typically requires a Bachelor’s degree in related field or equivalent experience.
• Typically requires 2 years of experience.
• Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations and permutations.
• Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory and factor analysis.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form, and deal with several abstract and concrete variables.
• Use of the following tools may be required:
• Electronic Assembly: color code, component, schematics. May require various PCB operations.
• Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer.
• Inspection: bare board, systems, components, cable and harness, microscope, measuring tools.

Required Skills:

Optional Skills:

• Root Cause Analysis and Test Planning: You will perform in-depth root cause analysis by meticulously analyzing failure modes and devising comprehensive test plans. Your expertise in planning and executing tests will be instrumental in pinpointing the underlying causes of failures.
• Big-Data-Driven Analysis: Utilizing cutting-edge big-data tools, you will correlate customer-reported failures with production data and RMA history. This data-driven approach will enable you to gain valuable insights into root causes, identify potential risks, and assess the overall exposure of quality issues.
• Customer Communication: As a pivotal point of contact, you will proactively communicate with Flex customers. Your effective communication skills will help build strong customer relationships and instill confidence in Flex commitment to product quality.
• Product Improvement Initiatives: You will play a critical role in enhancing the design, manufacturing process, and testing flow of our networking products. Through analysis processes, you will identify areas for improvement and recommend corrective and preventive actions to address quality complaints.
• Hands-on Lab Work: Your expertise will extend to conducting extensive lab work, encompassing hardware, firmware, and software components. This will involve debugging and characterizing system-level, board-level, and chip-level issues, ensuring a robust understanding of product performance.

• B.Sc/B.tech in Electrical Engineering or equivalent experience
• 5+ years of technical experience in hardware design/system failureanalysis/debugging/Architectureor Product Engineer.
• Proficient with circuit design tools and lab equipment and lab setups, troubleshooting skills, and writing diagnostic scripts/programs.
• A highly motivated teammate who always stays up-to-date with new technologies and FA methodologies.
• Proficient English is required.
• Background in the verification and validation of High-speed signals.
• Experience as a test engineer or product engineer
• Experience in Board design, System, or SOC architecture.
• Background with FW algorithm.
• Linux operating systems, and programming languages such as Perl/Python/C/C++

Required Skills:

Optional Skills:

The “” will be based in
XXXX, reporting to ……

In this role, you will be maintaining quality engineering programs, standards and improvements within the organization.

Responsibilities:

• Develops and initiates standards and methods for inspection, testing and evaluation.
• Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
• Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost.
• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability.
• Compiles and writes training material and conducts training sessions on quality control activities.
• Holds up Product Engineers and Quality Program Managers with customer interfaces as necessary on quality related issues.
• Assures data availability and integrity for all quality related data. Consolidates and reports quality results.
• Initiates corrective action requests as needed and tracks to satisfactory completion.
• Assists with development and implementation of quality audits.
• In charge of developing, applying, revising and maintaining quality standards for processing materials into partially finished or finished products.
• Designs and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and/or production equipment.
• Explores reports and returned products and recommends corrective action.
• Establishes program to evaluate precision and accuracy of production equipment and testing, measurement and research of equipment and facilities.
• Approves product, process and equipment qualifications.
• Provides liaison to various regulatory bodies.

Qualifications:

• Typically requires a Bachelor’s degree in related field or equivalent experience.
• Typically requires 6 years of experience in engineering in the high technology electronics industry or related field.
• Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations and permutations.
• Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory and factor analysis.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form, and deal with several abstract and concrete variables.
• Use of the following tools may be required:
• Electronic Assembly: color code, component, schematics. May require various PCB operations.
• Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer.
• Inspection: bare board, systems, components, cable and harness, microscope, measuring tools.
• Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools. Office skills: telephones, data entry, office software to include, word processing, spreadsheet and presentation package.
• Demonstrates operations and technical skills and understanding of Flex’s functional standards.
• Demonstrates working knowledge of functional concepts and a solid understanding of Flex policies and procedures. Typically requires some knowledge of computerized electronic test equipment and programming.
• Demonstrates advanced functional and technical skills and basic process skills. Demonstrates advanced/thorough knowledge of the function and Flex business.
• Typically requires skill and troubleshooting, and diagnostics, and overview of the entire test process and the ability to train others.
• Demonstrates advanced operations, technical and people and/or process skills as well as customer (external and internal) relationship skills. Demonstrates expert knowledge of the function and a thorough understanding of Flex and related business. Demonstrates knowledge of multiple functional technologies/ processes, industries or functions and understanding of interdependencies of such processes at the site.

Required Skills:

Optional Skills: