דרושים Manufacturing Technician - T1 ב-Applied Materials ב-Taiwan, Tainan

What We Offer

a Better Future.

Displays provide a window between people and the information universe. Humans crave information and we live in an era where digital information - entertainment, news, education, social networking, and much more – is readily available. Tainan Display Manufacturing Center (TMC) is the world-class manufacturing facility which lays a strategic role in employing deep display expertise to enable the next generation of displays
The fab helps display makers transform their ideas into reality and pave the way for the next generation of displays.

TMC plays a key role in advancing improvements such as image resolution and quality, size increases, and new form factors as the display industry has evolved from CRTs to LCDs, and now to OLED. These innovations, along with reduced costs, have enabled new products and driven the proliferation of displays that create dynamic and stunning visual experiences for consume.

Role Responsibilities:

1. Perform equipment assembly based on circuit and mechanical assembly drawings.
2. Receive and inspect parts to ensure there are no defects and that all necessary components are available for construction, testing, and maintenance.
3. Verify component quality, conduct vacuum leak tests, pressure holding tests, and pre-power-on equipment checks.
4. Carry out production-related tasks and complete execution records as required by documentation.
5. Complete training, departmental tasks, and assignments from supervisors as requested.
6. Willing to work rotating shifts (Day shift: 07:00–15:30 / Night shift: 15:30–24:00).

1.依電路 & 機械組立圖執行設備組裝與遵照procedure執行功能測試工作
2. 接收零件並進行清點檢視，檢查零件是否有缺陷，以確保所有必要的零件均可用於進行建造、測試和維修

3. 組件品質確認、真空測漏、保壓測試、設備通電前檢查
4. 依文件要求執行生產相關作業和填寫執行紀錄

5. 依要求完成訓練、部門工作與主管指派任務

6. 需可配合二班輪班作業 (早班7:00-15:30 晚班15:30-24:00)

1. 若無TOEIC 成績，面試前，將安排英文測驗。
2. 大專以上或相等學歷
3. 機械組裝 &電路或設備組裝相關經驗，具視電路圖能力尤佳
4. 具乙級電機 & 電子工業配線證照者尤佳
5. 具團隊合作及溝通協調能力
6. 可配合工作需求(如：需在無塵室環境作業並穿戴相關個人防護裝備，加班，輪班及出差)

Key Responsibilities

Performs moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures.

Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. May perform new system and NPI installations and field upgrades.

Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform moderate testing and troubleshooting.

Compiles logbooks and test procedures documentation utilizing good writing skills. Assists in revising, developing and implementing department procedures.

May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems.

Performs necessary rework and assists in determining remedies for malfunctions and generates Quality Notifications.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takescorrective/continuousimprovement actions.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Other Requirements:This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Tainan Display Manufacturing Center

Displays provide a window between people and the information universe. Humans crave information and we live in an era where digital information - entertainment, news, education, social networking, and much more – is readily available. Tainan Display Manufacturing Center (TMC) is the world-class manufacturing facility which lays a strategic role in employing deep display expertise to enable the next generation of displaysThe fab helps display makers transform their ideas into reality and pave the way for the next generation of displays.

TMC plays a key role in advancing improvements such as image resolution and quality, size increases, and new form factors as the display industry has evolved from CRTs to LCDs, and now to OLED. These innovations, along with reduced costs, have enabled new products and driven the proliferation of displays that create dynamic and stunning visual experiences for consume.

■ Key Responsibilities
1. Utilize basicassembly skills in assigned assembly tasks of display tools
2. Perform simple writing, soldering and/or calibration tasks as assigned.
3. Perform other duties and/or completes training as requested by Supervisor.■ 測試工作內容
1. 依電路 & 機械組立圖執行設備測試與系統整合工作

3. 依文件要求執行生產相關作業和填寫執行紀錄
4. 依要求完成訓練、部門工作與主管指派任務

需可配合二班輪班作業 (早班7:00-15:30 晚班15:30-24:00)

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information