דרושים Customer Engineer Ii - C2 Pdc ב-Applied Materials ב-Taiwan, Taichung

Role Responsibilities:

• Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment
• Use digital analytics for troubleshooting
• Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers]
• Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided)
• Coordinate and communicate directly with customers
• Fulfill additional duties, as assigned

Minimum Qualifications:

• Completion of an Associate degree, military technical training, field service experience, or trade certification
• Basic mechanical aptitude
• Willing to learn and interpret electrical and mechanical schematics
• Experience diagnosing and resolving basic technical challenges
• Effective written and verbal communication skills
• Basic knowledge of Microsoft Excel, Word, and PowerPoint
• Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.
• Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols.

Preferred Qualifications:

• 1–2 years of work experience in customer/field service support, or a related technical field
• Associate degree in electronics or engineering technologies
• Knowledge of pneumatics, hydraulics, electronics, vacuum, or thermodynamics
• Familiarity with hand tools and their appropriate usage, including digital multimeters

This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Role Responsibilities:

• Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment
• Use digital analytics for troubleshooting
• Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers]
• Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided)
• Coordinate and communicate directly with customers
• Fulfill additional duties, as assigned

Minimum Qualifications:

• Completion of an Associate degree, military technical training, field service experience, or trade certification
• Basic mechanical aptitude
• Willing to learn and interpret electrical and mechanical schematics
• Experience diagnosing and resolving basic technical challenges
• Effective written and verbal communication skills
• Basic knowledge of Microsoft Excel, Word, and PowerPoint
• Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.
• Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols.

Preferred Qualifications:

• 1–2 years of work experience in customer/field service support, or a related technical field
• Associate degree in electronics or engineering technologies
• Knowledge of pneumatics, hydraulics, electronics, vacuum, or thermodynamics
• Familiarity with hand tools and their appropriate usage, including digital multimeters

This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Role Responsibilities:

• Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment
• Use digital analytics for troubleshooting
• Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers]
• Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided)
• Coordinate and communicate directly with customers
• Fulfill additional duties, as assigned

Minimum Qualifications:

• Completion of an Associate degree, military technical training, field service experience, or trade certification
• Basic mechanical aptitude
• Willing to learn and interpret electrical and mechanical schematics
• Experience diagnosing and resolving basic technical challenges
• Effective written and verbal communication skills
• Basic knowledge of Microsoft Excel, Word, and PowerPoint
• Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.
• Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols.

Preferred Qualifications:

• 1–2 years of work experience in customer/field service support, or a related technical field
• Associate degree in electronics or engineering technologies
• Knowledge of pneumatics, hydraulics, electronics, vacuum, or thermodynamics
• Familiarity with hand tools and their appropriate usage, including digital multimeters

This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Role Responsibilities:

• Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment
• Use digital analytics for troubleshooting
• Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers]
• Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided)
• Coordinate and communicate directly with customers
• Fulfill additional duties, as assigned

Minimum Qualifications:

• Completion of an Associate degree, military technical training, field service experience, or trade certification
• Basic mechanical aptitude
• Willing to learn and interpret electrical and mechanical schematics
• Experience diagnosing and resolving basic technical challenges
• Effective written and verbal communication skills
• Basic knowledge of Microsoft Excel, Word, and PowerPoint
• Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.
• Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols.

Preferred Qualifications:

• 1–2 years of work experience in customer/field service support, or a related technical field
• Associate degree in electronics or engineering technologies
• Knowledge of pneumatics, hydraulics, electronics, vacuum, or thermodynamics
• Familiarity with hand tools and their appropriate usage, including digital multimeters

This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Role Responsibilities:

• Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment
• Use digital analytics for troubleshooting
• Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers]
• Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided)
• Coordinate and communicate directly with customers
• Fulfill additional duties, as assigned

Minimum Qualifications:

• Completion of an Associate degree, military technical training, field service experience, or trade certification
• Basic mechanical aptitude
• Willing to learn and interpret electrical and mechanical schematics
• Experience diagnosing and resolving basic technical challenges
• Effective written and verbal communication skills
• Basic knowledge of Microsoft Excel, Word, and PowerPoint
• Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.
• Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols.

Preferred Qualifications:

• 1–2 years of work experience in customer/field service support, or a related technical field
• Associate degree in electronics or engineering technologies
• Knowledge of pneumatics, hydraulics, electronics, vacuum, or thermodynamics
• Familiarity with hand tools and their appropriate usage, including digital multimeters

This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

This isforMicron F16 (Taichung).

Key Responsibilities

• Develops and maintains customer relationship with all relevant individuals in his/her district at all times, at all levels. Performs regular customer visits.

• Manages, coaches and directs all customer engineers in his/her district. Responsible for salary planning, career planning, corrective actions where necessary, establishes objectives and performance appraisals. Gives formal updates to all employees. Business, new hires, new products. Can invite any guest speaker.

• Initiates reports necessary for the business. Be the prime interface with the Product Divisions: tech support, training, spares, reliability.

• Monitors the CSD Award Program with quarterly results (election, announcements). Monitors the “mentor” program so that all new engineers have a defined mentor.

• Executes escalation procedure.

• Responsible for account planning with District Sales Engineer. Provides support plan for system sales to CSD Management, Sales, Field Engineering. Responsible for financial forecast for his/her district. Responsible for cost efficiency with the district. Measured by the financial result.

• Responsible for system installation; planning, reporting and execution, pre-facility meeting, start-up meeting, process support identification.

• Manages RMA procedure. Measurement of the engineers on their effectiveness. Manages accuracy, understanding and update of Customer Engineer hours tracking. Personal cross check and signature, measures customer engineers, takes corrective action with customer engineers.

Qualifications:

• At least 7 years above of working experience in Semiconductors, ETCH module experience is Plus . Equipment supplier (vendor site) experience with after service business acumen is preferred.

• If you are internal CE candidate, 3 years above C4 experience is must.

• 2 years above leader or people management experience

• Is capable to build up long-term relationship with customer

• English: needs to be able to communicate in English internally and externally.

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and powertools. Additionally,because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information