דרושים Technician Automation ב-Applied Materials ב-Singapore, Singapore

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components

• Performs electro-mechanical assembly operations, troubleshooting and repair

• Identifies and corrects errors

• Observes all safety standards and maintain a secure, safe, clean and healthy work environment

• Attends required health and safety training and follows safety and security policies, procedures and practices

• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept

• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly

• Actively strives to prevent accidents and injuries

• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components

• Enters data on computer terminal, such as progress, work expense and labor details

• May perform computer programming, repair or software

• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities

• Has good understanding of how the team integrates with others

• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods

• Good communication skills to exchange of information

• Able to commit Mon-Fri (4pm - 1.30am shift). Transport provided.

Work Location

• Upper Changi

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements:This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

• Cobot Lab Execution:
  • Assist in designing, configuring, and testing Cobot solutions for packaging automation.
  • Customize robotic arm setups and end-of-arm tools for real-world use cases.
  • Ensure system reliability, safety, and performance in high-volume environments.
• Warehouse Automation Projects:
  • Support the development of automation solutions for broader warehouse operations including material handling, sorting, and inventory workflows.
  • Participate in feasibility studies, prototyping, and validation testing.
• Cross-functional Collaboration:
  • Work closely with engineering, operations, and IT teams to integrate automation systems.
  • Engage with external collaborators and vendors to support solution development and deployment.

• Education:
  • Bachelor’s or Master’s degree in Industrial Engineering, Robotics, Automation Engineering, or a related field.
• Experience & Skills:
  • Hands-on experience with robotic arms and end-of-arm tooling.
  • Exposure to robotics system integration and testing in operational environments.
  • Strong analytical and problem-solving skills.
  • Ability to work effectively in cross-functional and collaborative settings.

• Familiarity with collaborative robots (Cobots) in logistics or manufacturing environments.
• Experience in automation for large-scale warehouse operations.
• Knowledge of robotics programming and simulation tools.

• Robotics Lab :
  • Design, configure, and test collaborative robotic (Cobot) systems for packaging automation.
  • Develop and validate robotic arm setups and tooling for real-world packaging use cases.
  • Ensure operational reliability, safety, and scalability.
• Solution Development:
  • Architect and implement robotics systems for material handling, sorting, and inventory workflows.
  • Conduct feasibility studies, prototyping, and performance validation.
• Project Management:
  • Lead robotics automation projects across warehouse operations.
  • Collaborate with internal teams and external partners to deliver integrated solutions.
  • Manage timelines, budgets, and stakeholder communications.

• Education:
  • Bachelor’s or Master’s degree in Robotics, Automation Engineering, Mechatronics, or a related field.
• Experience & Skills:
  • Hands-on experience with configuring robotic arms and end-of-arm tools.
  • Proven track record in robotics system integration and testing.
  • Strong project management and cross-functional collaboration skills.
  • Familiarity with industrial automation standards and safety protocols.

• Experience with collaborative robots (Cobots) in logistics or manufacturing environments.
• Exposure to automation in large-scale warehouse operations.
• Proficiency in robotics programming and simulation tools.